液压加载的英文

• hydraulic loading

• "液压"英文翻译    hydraulic pressure
• "加载"英文翻译    loading; straining; stressin ...
• "闭环液压加载系统" 英文翻译 :    closed-loohydraulic loading system
• "液压加载预应力轧机" 英文翻译 :    hydraulically-loaded pre-stre ed rolling mill; hydraulically-loaded pre-stressed rolling mill
• "气压加载" 英文翻译 :    air loading
• "液压加工法" 英文翻译 :    hydromatic process
• "液压加力器" 英文翻译 :    hydrobooster
• "液压加油器" 英文翻译 :    hydrostatic oiler
• "水压加载试验" 英文翻译 :    water loading test
• "液压加压装置" 英文翻译 :    hydraulic pulldown
• "加载" 英文翻译 :    loading; straining; stressing; load-on; out-in
• "液压" 英文翻译 :    hydraulic pressure◇液压泵 hydraulic pump; 液压表 hydraulic pressure gauge; hydraulic pressure indicator; 液压成形 hydroform; 液压传动 hydraulic drive; hydraulic (power) transmission; 液压机 hydropress; hydrostatic press; hydraulic press; 液压机车 hydraulic locomotive; 液压联轴节 hydraulic coupling; 液压千斤顶 hydraulic jack; 液压升降机 hydraulic elevator [lift]; 液压闸门 hydraulic gate; 液压支架 hydraulic support; 液压支柱 hydraulic prop; 液压制动器 hydraulic brake
• "撑压加工" 英文翻译 :    bulging
• "冲压加工" 英文翻译 :    stamping(press working)
• "低电压加热" 英文翻译 :    low-voltage heating
• "低压加热炉" 英文翻译 :    low pressure heater
• "低压加热器" 英文翻译 :    low pre ure heater; low pressure heater; low-pressure heater; lower pressure heater
• "低压加深" 英文翻译 :    deepening of a depression
• "低压加速器" 英文翻译 :    low voltage accelerator
• "电压加权值" 英文翻译 :    weighted value of a voltage
• "锻压加工" 英文翻译 :    stamping
• "高压加氢" 英文翻译 :    high-pressure hydrocracking; high-pressure hydrogenation
• "高压加热器" 英文翻译 :    high pre ure heater; high pressure heater hph; high-pressure heater; highpressureheater
• "高压加速器" 英文翻译 :    high voltage accelerator
• "滚压加工" 英文翻译 :    roll finishing

• So performances of the hydraulic hitch decide performances of tractor . theory and experiment are studied on the hydraulic hitch and the hydraulic loading
  论文研究的内容主要是液压悬挂系统和液压加载系统的理论分析和试验研究。
• This kind of load can not be content with the increasing request of process of test load , when the test is needed to simulate actual working condition of the products
  试验人员调整的依据是他们对设备的使用经验和双眼看到的测试设备显示的当前载荷。随着对试验加载过程要求的提高，原有的人工液压加载方式已不能满足这种要求。
• The test load can be put on samples by the way of mechanical , electric or hydraulic equipment . the hydraulic equipment has been widely used in practice because of the stability and low noise features
  静力试验可以通过机械、电动和液压等加载方式完成，其中液压加载凭借良好的平稳性和运行中的低噪声，在工程试验中得到极为广泛的应用。
• This study includes design of the special loading - frame and hydraulic loading system for checking - up the lift capacity of tractor hydraulic lifter , besides , it involves the fixing and debuge and experimentation of the whole test bench
  本设计研究主要包括拖拉机液压提升器提升能力检测专用加载框架的设计和液压加载系统的设计，另外还包括整机的安装与调试及试验。
• With the digital control , volume of compressive oil provided by hydraulic power unit in actuator can be regulated to modulate the test load value . in conformity with the idea , we developed two systems - force and displacement control system in this paper
  根据这一设计思想，我们依据被控参量开发了两个液压加载分系统：力控制系统和位移控制系统，以满足不同的试验需求。
• Subsequently , designing the integration of hydraulic loop which makes whole system ' s structure more tighter and simplifies hydraulic loop , so , completing the deploy of hydraulic component . so as to completing the design of whole hydraulic loading system
  为使系统结构布置紧凑、管路简化，根据选择的液压元件及已确定的液压回路设计了液压集成块，完成液压元件的配置，从而完成液压加载系统系统的设计。
• In formerly static strength tests , no attention was paid to the process of test load . according to their experiences , experimenters adjusted pressure in actuator only by hand to control the test load value and the load value was read from instruments
  早期的静力试验对加载过程没有严格的要求，所以当时的液压加载方式由试验人员直接调整供油压力，改变液压缸内的油压，控制活塞杆输出的集中力载荷。
• The parameters which the rotate speed change , working resistance and depth are included synthetically control the hydraulic hitch in tractor . the tractor is working at best state . the performance sof tractor are best expect interferers
  液压悬挂系统是拖拉机作业机组的一个组成部分，对液压悬挂系统和液压加载系统的性能进行最优控制理论分析和控制方法的研究，是保证拖拉机作业机组达到最优性能的基础。
• Based on the hydromechanics principle , the hydraulic equipment can push compressive oil into actuators by the pressure and direction control circuits . the piston of actuator translates distributed pressure into centralized force of piston rod
  液压加载根据液压流体力学原理，利用液压元件组成的压力和方向控制回路，将一定压力的油液输入液压缸，由液压缸内的活塞把分布的油压转变为集中力，最后经活塞杆输出。
• At present , most load systems in china are fluid drive systems ; this paper solves two main difficulties in electro - motion system : the realization of speediness and the elimination of the superabundant torque . it can provide some new information in load system ' s further investigation
  国内现有的加载系统多为液压加载，本文的研究工作解决了电动加载的两个主要难点：快速性的实现和多余力的消除，对加载系统的研究有一定的参考价值。