横向位置的英文

• horizontal position
• lateral attitude

• "横向"英文翻译    broadwise; infeed; crossrang ...
• "位置"英文翻译    seat; place; location; site
• "门横向位置" 英文翻译 :    gate lateral position
• "浮心横向位置" 英文翻译 :    transverse location of center of buoyancy
• "向位置" 英文翻译 :    u position; v position
• "横向位移" 英文翻译 :    crosswind displacement; lateral displacement; lateral drift; lateral shift; pressure pattern displacement; transversal displacement; transversal shift; transverse displacement; transverse distribution
• "u向位置" 英文翻译 :    u position
• "背向位置" 英文翻译 :    trailing position
• "垂向位置" 英文翻译 :    vertical position
• "航向位置" 英文翻译 :    course position
• "径向位置" 英文翻译 :    radial position
• "切向位置" 英文翻译 :    tangential position
• "弦向位置" 英文翻译 :    chordwise location; chordwise position
• "轴向位置" 英文翻译 :    axial position
• "准向位置" 英文翻译 :    boresight location
• "纵向位置" 英文翻译 :    lengthwise position
• "横向移动；横向位移；侧向位移" 英文翻译 :    lateral movement
• "横向位移损耗" 英文翻译 :    lateral displaceent loss; lateraldisplaceentloss
• "浮心垂向位置" 英文翻译 :    vertical location of center of buoyancy
• "浮心纵向位置" 英文翻译 :    longitudinal center of buoyancy; longitudinal center on buoyancy
• "漂心纵向位置" 英文翻译 :    longitudinal center of flotation
• "束流径向位置" 英文翻译 :    radial beam position
• "重心垂向位置" 英文翻译 :    vertical center of gravity
• "重心纵向位置" 英文翻译 :    longitudinal center of gravity
• "刀盘的轴向位置" 英文翻译 :    cutter axial

• Generally the geometry of the electrode configuration is kept uniform while the position is changed laterally along a profile .
  当沿着剖面线改变排列的横向位置时，电极的几何结构一般都保持不变的。
• In fact , information fusion modal is the location of vehicle lateral position which establishes research fundament of control modal later
  信息融合模型的建立，实际上是汽车横向位置的定位，为后面进行控制模型的研究奠定了基础。
• The two drillfloor locations are cantilever fully extended with the drillfloor on centerline and cantilever fully extended with the drillfloor at the maximum transverse location
  两个钻台的位置是在中心线上连同钻台完全伸出的悬臂以及在最大的横向位置上连同钻台完全伸出的悬臂。
• To achieve this , the rear exhaust silencer has been located in a transverse position where it also serves as an aerodynamic diffuser , but still allows sufficient space for the storage of a spare wheel
  要做到这一点,后方排气消声一直设在横向位置,也可作为气动扩,但仍留有足够的空间储存了备胎
• The results show that : blow ratio is a main influential factor to the film cooling effectiveness , the film cooling effectiveness decreases with the increasing of blow ratio ; the film cooling effectiveness of discrete holes fluctuate dramatically across the transverse section , and dead zone is prone to occur be tween two discrete holes
  结果表明：吹风比对气膜冷却效果的影响很大，冷却效果随吹风比的增大而降低；圆孔气膜冷却效果沿横向位置波动较大，孔之间容易形成冷却死区。