多组元的英文

• polychormism
• polycomponent

• "多组"英文翻译    multigroup; multiple-unit
• "元"英文翻译    first; primary
• "多组元的" 英文翻译 :    multiunit
• "多组元结构" 英文翻译 :    multicomponent structure
• "组元" 英文翻译 :    component; compoonent; constituent element; martensite-austenite constituent
• "组元a" 英文翻译 :    component a
• "多组" 英文翻译 :    multigroup; multiple-unit◇多组计算 multigroup calculation; 多组信息 multipacket message
• "组元层" 英文翻译 :    constituent layer
• "多组耙" 英文翻译 :    section harrow
• "多组的" 英文翻译 :    multi-bank
• "多组法" 英文翻译 :    multigroumethod
• "多组分" 英文翻译 :    polycomponent
• "多组核" 英文翻译 :    polycaryon; polykaryon
• "多组犁" 英文翻译 :    gang plough
• "多组群" 英文翻译 :    multi-group
• "多组织" 英文翻译 :    multiple organizations
• "本能组元" 英文翻译 :    instinctcomponentt
• "大气组元" 英文翻译 :    atmospheric constituent
• "单组元喷嘴" 英文翻译 :    single element injector; single-element injector
• "电枢绕组元" 英文翻译 :    armature loop
• "二组元模型" 英文翻译 :    two-component model
• "反应堆组元" 英文翻译 :    reactor components
• "固体组元" 英文翻译 :    solid component
• "活性区组元" 英文翻译 :    core element
• "联系神组元" 英文翻译 :    intermediate neurone

• Study on catalytic activities of oxidized or reduced polycomponenet noble metals auto - catalysts
  还原态多组元贵金属尾气净化催化剂催化性能的研究
• The result shows that when x , y is 0 . 03 , product has good comprehensive property . it has the initial capacity of about 115mah / g and the third cycling capacity of 114mah / g
  掺杂多组元元素合成了lia4 ； ： n ， mnkvo仆当掺杂钻为0刀3 、镍为0
• By using the ansys software , a finite element model which simulates a real sls process of a multi - component ni - cusn metal powder system was established to calculate the 3d transient temperature field
  利用ansys有限元软件,建立了ni - cusn多组元混合粉末选择性激光烧结过程三维瞬态温度场分析模型。
• Based on the results of temperature field , a finite element model for analyzing the stress field in sls process of a multi - component metal powder system was established by using an indirect thermal - mechanical coupling method
  基于温度场的计算结果,采用热力耦合方法,建立了ni - cusn多组元混合粉末选择性激光烧结过程应力应变场分析模型。
• To alleviate the defects in metallic sls , numerical and experimental studies were carried out detailed on the features of temperature field as well as thermal elastic - plastic stress and strain during metallic sls process
  因此,本文针对ni - cu基多组元混合粉末选择性激光烧结温度和应力应变的变化规律和特点开展了系统深入的数值分析和试验研究。
• The research development of channel segregation ( freckle ) during solidification in multi - component systems is discussed , including the freckle characteristic , influencing factor and physical feature
  摘要对多组元复杂体系（尤其是高温合金体系）在凝固过程中形成的通道偏析即黑斑的研究现状进行了评述，包括黑斑的存在方式、影响因素和物理特征等。
• The injection process parameters influencing on injection , debinding behavior and process influencing on defects , sintering influencing on shrinkage , density , mechanical properties , and stainless steel adding cu for injection molding were examined . the experiment showed that flowing property of mixing was improved other than stability with increasing temperature and paraffin ratio in binder
  用石蜡、聚乙烯、聚丙烯为添加剂，油酸为表面活性剂，组成石蜡基多组元粘结剂体系，研究注射成形工艺过程，工艺参数对成型的影响，脱脂行为和脱脂工艺对脱脂缺陷的影响，烧结工艺对收缩率、密度、力学性能的影响，以及含铜不锈钢对不锈钢耐蚀性的影响。
• The experts confirmed that the nh2c and nh15a high permeability material and ferrite cores have adapted well with the improvement of the electrons which would be smaller , thinner and lighter . the same time the cores assume so many advantages such as high flux density , high curie temperature , high frequency , low - loss etc . the technical indicators of the cores have been the nation - lead position in the same species
  由行业专家组成的鉴定委员会一致认为，上述两项产品采用湿法制粉工艺，通过配方设计多组元添加烧结条件控制等工艺改进，控制了材料的微结构和性能，产品批量生产的一致性好，成品率高，性能处于国内领先水平。