啮合的的英文

• jogged
• joggled
• meshed

• "啮合"英文翻译    clench the teeth mesh; engag ...
• "的"英文翻译    4次方是 The fourth power of 2 i ...
• "不啮合的" 英文翻译 :    out of mesh
• "内啮合的" 英文翻译 :    internally toothed; internally-toothed
• "啮合的齿轮" 英文翻译 :    meshed gears
• "无齿轮啮合的" 英文翻译 :    ungeared
• "相啮合的齿轮" 英文翻译 :    mating gear
• "锥齿轮啮合的" 英文翻译 :    v and h check
• "啮合的动作或结果" 英文翻译 :    action or result of engaging
• "相互啮合的齿轮" 英文翻译 :    pitch wheel
• "与齿条啮合的小齿轮" 英文翻译 :    rack pinion
• "与减速器啮合的螺旋桨" 英文翻译 :    driven propeller
• "啮合" 英文翻译 :    1.(上下牙咬紧) clench the teeth2.(像牙齿那样咬紧) mesh; engage; falling-in; gear into; put into gear 这两个齿轮啮合在一起。 the two cogwheels are engaged.; 啮合角 angle of engagement; generating angle; locking angle; 啮合扣 joggle; 啮合面 field of conjugate action;啮合深度 depth of engagement; 啮合时间 engagement time; 啮合位置 position of engagement; 啮合状态 engagement
• "齿轮离合器接合的常啮合齿轮" 英文翻译 :    dog-engaged constant mesh gears
• "齿轮离合器接合的常啮合轮" 英文翻译 :    dog engaged constant mesh gears
• "不啮合" 英文翻译 :    not in mesh; out-of-gear
• "常啮合" 英文翻译 :    constant mesh
• "点啮合" 英文翻译 :    point gearing; point toothing
• "内啮合" 英文翻译 :    inner gearing; inside gearing; internal engagement; internal gearing; internal toothing
• "啮合；网目" 英文翻译 :    mesh
• "啮合部" 英文翻译 :    engaging piece
• "啮合齿" 英文翻译 :    engaging tooth
• "啮合点" 英文翻译 :    contact points; engagement point; mesh point; meshing point; point of engagement
• "啮合端" 英文翻译 :    end of engagement; engaging end
• "啮合杆" 英文翻译 :    engaging lever

• It contained a sequence of engaging dials .
  它包括一系列啮合的拨号盘。
• Its interlocking teeth would spring open or jam
  拉链上互相啮合的齿能拉开也能合拢。
• Helix angles for cylindrical gear teeth
  圆柱齿轮啮合的螺旋角
• Of a selector , a moving contact that engages with the contacts of a bank
  与存储单元的触点相啮合的选择器滑动触点。
• A small cogwheel that engages or is engaged by a larger cogwheel or a rack
  小齿轮，齿杆啮合大齿轮或被大齿轮或齿条啮合的小齿轮
• The judgment condition for the involute gear pairwith fewer teeth number outside pitch point
  少齿数渐开线齿轮节点外啮合的判定条件
• The " calendar round " is like two gears that inter - mesh , one smaller than the other
  “历法圆圈”就像两个互相啮合的齿轮，一个比另一个更小。
• By designing the negative shift for the sprocket , its trajectory coincides with the theoretical one , and the meshing quality is improved
  通过对链轮的负变位设计，使运动轨迹与理论轨迹重合，提高了啮合质量，并对啮合的重合度作了分析计算，对重合度的选择提供了依据。
• Since the gear engagement is a common coupling form between rotors , the transfer matrix of skew gear engagement in global coordinate system is deduced based on the concept of coupling element
  齿轮啮合是转子之间常见的一种耦合形式，根据耦合单元的概念，推导了在全局坐标系下斜齿轮啮合的传递矩阵。
• The equation of pressure angle , width coefficient , and contact ratio are calculated and the influences of these parameters on contact are analyzed . based on ordinary involute gear , the diametral deflection principle of curvilinear - tooth
  最后针对现有文献的不足,研究了刀具压力角、齿宽系数和重合度等参数的计算方法,并分析了这些参数对弧齿线圆柱齿轮啮合的影响。