分流模的英文

• divergent die

• "分流"英文翻译    bypass flow; distributary; s ...
• "模"英文翻译    mould; pattern; matrix
• "孔式分流模" 英文翻译 :    porthole
• "多孔分流模挤压" 英文翻译 :    porthole extrusion
• "分流" 英文翻译 :    bypass flow; distributary; split-flow; shunt; shunting; branch; bridging
• "电流模" 英文翻译 :    current mode
• "流模块" 英文翻译 :    ipx stream module
• "细流模" 英文翻译 :    rill mold
• "分流,分路,分流器" 英文翻译 :    shunt
• "分流；分流器；旁路" 英文翻译 :    shunt
• "分流器，分流，分路" 英文翻译 :    shunt
• "伴流模拟" 英文翻译 :    wake simulation
• "伴流模拟器" 英文翻译 :    wake simulator
• "串流模式" 英文翻译 :    stream name
• "点对流模型" 英文翻译 :    point convective model
• "电流模逻辑" 英文翻译 :    cml
• "电流模拟" 英文翻译 :    current analogue
• "电流模式" 英文翻译 :    current mode; mode current
• "定常流模式" 英文翻译 :    steady flow model
• "对流模量" 英文翻译 :    convection modulus
• "对流模式" 英文翻译 :    convection modulus
• "高粘流模具" 英文翻译 :    deep-flow mold; deep-flow mould
• "管流模型" 英文翻译 :    conduit flow model; model
• "过渡流模型" 英文翻译 :    transition flow model
• "河流模型" 英文翻译 :    river model

• By analyzing the optimal diffluent ratio and solder angle of the dies , the maximum stress in the body of improved dies is de - creased effectively
  对模具的分流比和焊合角进行优化并再次模拟，发现分流模的最大应力大大降低。
• Collecting a lot of information about mold ' s design , a formula of giving the best height of mold and the process of mold ' s design is provided , which can meet the need in practices
  然后分析挤压分流模cad系统的需求，提出模具cad系统的功能模型，进行铝型材挤压分流模cad系统总体设计。
• The best construction method had been used to create 3d model of mold . moreover , the 3dcad system is developed in ugh developing environment using vc + + 6 . 0 as the developing tools . 2
  最后，在三维建模软件ug 17 . 0的二次开发环境中以vc 6 . 0为开发工具，开发出满足实际生产需要的挤压分流模三维cad系统设计软件。
• Both using the data file to transfer the data and using the parametric technology to constraint relationship between the key structure of the mold are two characteristics of this 3d - cad system
  以数据文件形式，统一数据类型，实现系统数据共享。并提出以分流模模型的“基本骨架”为设计模型的思想，实现模具设计的参数化。
• Through the analysis of loadcase on aluminum profile porthole die , it shows the porthole die will have certain deformation under complex loadcases , especially the porthole die mandrel , and the deformation will decrease the precision , surface quality and life of the final product
  摘要通过对铝型材挤压分流模工作状况的分析，说明其在复杂的工况下会发生一定的变形，尤其是模芯部分，这不仅降低了产品的尺寸精度和表面质量，也降低了其寿命。
• Fem simulation is presented to study the deformation of the porthole die during the process of aluminum profile extrusion , it will provide evidence for the scientific and suitable design of the die , finally the increase of product precision and the life of die can be reached
  介绍了国内外应用有限元方法对铝型材挤压过程研究的状况，提出了对铝型材挤压过程中分流模的变形进行有限元数值模拟研究的思路，为模具的科学、合理设计提供依据，以达到提高产品尺寸精度，提高模具寿命的目的。
• The 3d cad system for aluminum material developed automatically can perform the design of the selecting mould by feature modeling . the valuable information about the quality of mold is given by 3d finite element analyses . what have been done in the paper will contribute to the mold industry
  通过对铝型材挤压分流模具三维cad cae技术的探讨，基本实现模具设计，分析、硼的整个过程，并开发出能实际使用的挤压分流模cad系统，实现模具设计参数化和人机矩式设计，并进行分流模三维力场的有限元分析，对模具关键部位的形变进行控制，瞻具准确评价。

• 分流模的日语：すえひろダイ