metal-to-metal造句

• Standard practice for conducting creep tests of metal - to - metal adhesives
  进行金属间胶粘剂蠕变试验的标准实施规程
• This will ensure good metal - to - metal contact and minimum leakage
  这将保证有良好的金属-对-金属接触面和最小的泄漏。
• Standard test method for cleavage strength of metal - to - metal adhesive bonds
  金属之间胶粘剂粘结力抗裂强度的标准测试方法
• Standard test method for creep properties of adhesives in shear by tension loading metal - to - metal
  用拉力负荷法测定金属之间胶粘剂蠕变性能的标准试验方法
• Standard test method for creep properties of adhesives in shear by compression loading metal - to - metal
  用压力荷载法测定金属之间胶粘剂蠕变性能的标准试验方法
• B connections for general use and fluid power - ports and stud ends with thread - stud ends with metal - to - metal sealing type b
  液压管接头用螺纹油口和柱端金属对金属密封柱端
• These parts must be protected by lubricating oil so that there will be no actual metal - to - metal contact
  要保护这些零件就必须进行润滑,这样可以避免金属零件之间的直接接触
• Test method for strength properties of adhesives in shear by tension loading at elevated temperatures metal - to - metal
  高温下用拉力负荷法测定金属之间胶粘剂剪切强度的试验方法
• Standard test method for apparent shear strength of single - lap - joint adhesively bonded metal specimens by tension loading metal - to - metal
  用拉力负载法测定单面搭接粘结的金属试样表面剪切强度的标准试验方法
• Metal - to - metal seating means not best choice for frequent operation . bubble - tight seating should not be expected with metal - to - metal design
  金属对金属阀座意味着不适用于频繁操作。金属对金属结构也不适用于无气泡阀座。
• The valve bonnet may now be removed . there may be slight leakage , as the metal - to - metal backseating does not provide a drip - tight seal
  现在可以拆卸阀门的阀盖。当金属-对-金属后座无法提供无滴漏密封时，可能会有点泄漏。
• The valve bonnet may now be removed . there may be a slight leakage , as the metal - to - metal backseating does not provide a drip - tight seal
  现在可以拆卸阀盖。如果金属-对-金属后座没有实现无滴漏密封，则可能会有轻微的泄漏。
• Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - threaded ports
  普通和液压传动用联接件.用iso 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.螺纹气门
• E connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - stud ends with elastomeric sealing type e
  普通和液压传动用联接件.用iso 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头
• B connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - stud ends with metal - to - metal sealing type b
  普通和液压用联接结件.用iso 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头
• Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 1 : threaded ports
  一般用途的和流体动力用接头.带弹性密封件或金属与金属间密封件的iso 261螺纹的端口和螺柱端头.第1部分:螺纹端口
• Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 1 : threaded ports
  一般用途和流体动力用连接件.带弹性体密封件或金属对金属密封件的iso 261螺纹的孔口和螺柱端.第1部分:带螺纹的孔口
• Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 2 : stud ends with elastomeric sealing type e
  流体动力用和通用连接件.带iso 261螺纹，带有弹性体或金属对金属密封件的端口和螺柱断头.第2部分:带弹性密封的螺柱端头
• Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 2 : stud ends with elastomeric sealing type e
  一般用途和流体动力用连接件.带弹性体密封件或金属对金属密封件的iso 261螺纹的孔口和螺柱端.第2部分:带弹性体密封件的螺柱端e型
• Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 3 : stud ends with metal - to - metal sealing type b
  一般用途和流体动力用连接件.带弹性体密封件或金属对金属密封件的iso 261螺纹的孔口和螺柱端.第3部分:带金属对金属密封件的螺柱端b型