高度差的英文

• altimeter lag
• altitude difference
• altitude differential
• altitude intercept
• diff h
• difference in height
• difference of altitude
• elevation difference

• "高度"英文翻译    altitude; height; elevation
• "差"英文翻译    send on an errand; dispatch
• "height]高度差" 英文翻译 :    diff h
• "垂直高度差" 英文翻译 :    vertical drop
• "调制高度差" 英文翻译 :    deferring depth of modulation
• "高度差；潮高差" 英文翻译 :    height difference
• "高度差法" 英文翻译 :    altitude difference method; intercept method
• "高度差截距" 英文翻译 :    altitude intercept
• "高度差距" 英文翻译 :    altitude intercept
• "压力高度差" 英文翻译 :    pressure altitude variation
• "顶距差法；高度差法" 英文翻译 :    intercept method
• "天文定位高度差法" 英文翻译 :    saint hilaire method
• "登船甲板对码头高度差" 英文翻译 :    ship threshold height; shithreshold height
• "目标高度差计算规则" 英文翻译 :    angular elevation rule
• "倾斜切刃的两端高度差" 英文翻译 :    shear height
• "相邻两等高线的高度差" 英文翻译 :    contour interval
• "发射阵地与指挥仪的高度差" 英文翻译 :    gun site-director altitude difference
• "幅度差" 英文翻译 :    separation
• "黑度差" 英文翻译 :    density differience
• "辉度差" 英文翻译 :    luminance difference
• "角度差" 英文翻译 :    angle difference
• "经度差" 英文翻译 :    d lo; difference in longitude; difference of longitude; longitude difference
• "亮度差" 英文翻译 :    luminance difference
• "流度差" 英文翻译 :    mobility contrast
• "密度差" 英文翻译 :    density contrast; density differences; difference in density

• Saint hilaire method
  天文定位高度差法
• Affect field of sight . if you ' re on a plateau , you can ' t be seen from below ! hence : always occupy high ground first
  高度差影响视野。如果你在一个高地上，下面是看不见你的。所以：首先占领高地！
• The difference in height between the collar stand and the collar is one of the main factors affecting the design of gradient data of lapel collar
  摘要影响翻驳领倒伏量的因素很多，其中翻领与领座的高度差量是最主要的影响因素。
• The height of teeth points is different . when the balance of height is over 0 . 1mm 0 . 004 " , the sawing tangent will be the shape of arc . see the drawing
  锯尖端高度不一致，当高度差超过0 . 2mm 0 . 08 "时，锯切线就会形成圆弧形，如图。
• In the height - calibrating method , after the calibration board is moved twice , the calibration matrix can be got from the relationship between the phase and the height of the calibration board
  通过移动标定平面到两个不同位置，得到标定位置处的光栅图像，根据平面间的相位差和高度差得到高度标定矩阵。
• Since the evening of nineties , the automatization level has made good progress in firepower power plan . the capability of single unit is getting more and more , and the size of the central workshop is getting larger and larger
  自90年代后期,火力发电厂的自动化水平不断提高,单机容量不断增大,主厂房体型越来越大,厂房高度、跨度、高度差加大。
• A sample is put on the table which is processed into a inclined plane on the filmed plane , and two interfaces of a film are focalized , then the thickness is read out that is a difference between the heights of two interfaces of a film
  将实验样品的覆膜面打磨成斜面后平放在金相显微镜样品台上，分别对膜层的两个界面对焦，从对焦旋钮上读出两焦面的高度差即为膜层的厚度。
• The stationary , hydraulic lift tables are characterized by their heavy loading , wide usage , high safety and high effclendy . they are available for smooth rising in inspection and installation of large equipment , as well as using together with production line and special equipment
  该产品承载最大、行程范围广、安全高效，用于物流过程中高度差之间的货物输送、装卸、传递，可与流水线、专用设备等配套使用；大型设备检修、安装等举升用。
• Methods ： fifty paired embalmed cadaveric humeri ( twenty - five pairs : fourteen from male donors and eleven from female donors ) were scanned in medial - lateral ( ml ) and anterior - posterior ( ap ) position according to the humeral retroversion by ct . images of the humeri in the transverse planes at the lowest border of neck ( lbn ) , 20mm and 40mm distal of lbn ( lbn - 20 、 lbn - 40 ) , isthmus , head - neck anterior - posterior ( hn - ap ) were obtained . sixty - one extracortical and intracortical parameters were measured exactly by image analytic computer software that included offset , head position , head - shaft angle , head to tuberosity height ( ht ) , head thickness , curvature radius , articular surface arc ( sa ) , neck diameter , isthmus position , proximal and distal border of isthmus , maximum coronal and sagittal diameter of medullary canal and thickness of cortical bone in four planes , including lbn , lbn - 20 , lbn - 40 and isthmus
  方法： 50根成对防腐肱骨(男14对，女11对)按肱骨头扭转角置于冠状位和矢状位，行肱骨全长，头颈矢状面，解剖颈下缘及其下20mm 、 40mm ，髓腔狭窄部四平面ct扫描，由ct软件测量冠、矢状位髓腔内外参数共61项，包括头心?干轴距，头位置，头干角，头?结节高度差，头厚度，头半径，关节面张角，解剖颈直径，髓腔狭窄部位置，解剖颈下缘及其下20mm 、 40mm和狭窄部四个平面髓腔的最大冠、矢状径，皮质骨厚度等。
• Adopting method of graphical modeling and with help of object - oriented design thought , a set of graphical modeling softwares has been developed by using c # . net programming tool , the influence of fluid network ' s height difference upon the pressure - flow rate passage being considered , at the same time , the enthalpy - temperature passage being also added , thereby perfecting and expanding further the fluid network
  摘要采用图形化建模方法，借助面向对象的设计思想，使用c # . net编程工具开发了流体网络图形建模软件，该软件对压力流量通道考虑了流体网络高度差的影响，并增加了洽温通道，从而对流体网络做了进一步完善和扩展。

• 高度差的日语：すいちょくてんかい こうどさ
• 高度差的俄语：превышение
• 高度差とは意味高度差 こうどさ height difference difference in elevation