额定频率的英文

• full speed
• nominal frequency
• rated frequency

• "额定"英文翻译    specified; rated
• "频率"英文翻译    frequency; rate
• "超过额定频率" 英文翻译 :    overfrequency
• "低于额定频率" 英文翻译 :    underfrequency
• "额定频率范围" 英文翻译 :    rated frequency range
• "频率过低；低于额定频率" 英文翻译 :    underfrequency
• "扬声器额定频率范围" 英文翻译 :    rated frequency range of loudspeaker
• "额定频带" 英文翻译 :    nominal band
• "额定频偏" 英文翻译 :    rated frequency deviation
• "标定频率" 英文翻译 :    fixed frequency; spot frequency
• "非固定频率" 英文翻译 :    non-stationary frequency
• "固定频率" 英文翻译 :    fixed-frequency
• "固定频率源" 英文翻译 :    fixed-frequency source
• "规定频率" 英文翻译 :    assigned frequency
• "核定频率" 英文翻译 :    authorized frequency
• "恒定频率" 英文翻译 :    constant-frequency
• "稳定频率" 英文翻译 :    controlled frequency; established frequency; stabilized frequency
• "预定频率" 英文翻译 :    preset frequency
• "约定频率" 英文翻译 :    agreed frequency
• "指定频率" 英文翻译 :    assigned frequency; designated frequency
• "带宽稳定频率" 英文翻译 :    stable bandwidth frequency
• "定频率起搏器" 英文翻译 :    fixed rate pacemaker
• "固定频率抽运" 英文翻译 :    unswept pumping
• "固定频率震源" 英文翻译 :    constant-frequency source
• "规定频率差度" 英文翻译 :    scheduled frequency offset

• Rated frequency hz
  额定频率hz
• Ratings of frequency , voltage and current of electric products for ships and offshore units
  船舶和近海装置用电工产品的额定频率额定电压额定电流
• Ratings of frequency , voltage and current of electric products for ships and offshore units
  船舶和海上石油平台用电工产品的额定频率额定电压额定电流
• On the condition that volotage loop pluses 115 percent of rated voltage and that there s no current , in circuit , otput that meters test should not be more than one pulse
  电表在额定电压额定频率及功率的条件下： 1级表为0 . 004ib 2级表为0 . 005ib
• As an example , finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35kv , rating secondary voltage 100v , rating frequency 50hz
  并以额定一次电压35kv ，额定二次电压100v ，额定频率50hz的电压互感器为例，进行了有限元分析计算和优化设计。
• Starting current the meter can work corectly at rated voltage , rated frequency . when load currdnt is large then 0 . 4 ib . power facotor : 1 . running with no - load the meter use logic circuit to anti - creep
  启动电流：在额定电压额定频率功率因数为1的条件下，当负载电流大于0 . 4 ib时电度表都能正常工作。
• The type of the specific vaccum tap switch which i study is bpkal50 - 10 / 35 - 9c . this tap switch is suitable for 6 - 10kv - voltage degree which maximum current rating is 150a and maximum usable frequency is 50hz
  课题具体研制的真空开关型号为bpk 150 ? 10 / 35 ? 9c 。它适用于电压等级为6 ? 10kv ，最大额定通过电流为150a ，额定频率为50hz ，三相任意连接的干式电力变压器。
• Luminaires that conform to the safety standard should bear proper markings of rated voltage , rated frequency , rated power , number and type of lamp bulbs , model number , mark of origin ( manufacturer nametrade mark ) and symbol for suitability or non - suitability for direct mounting on combustible surfaces where applicable
  符合安全标准的灯饰须有适当的标记，包括额定电压、额定频率、额定功率、灯泡的数目和类别、型号、原产地标志（制造商名称或商标） 、是否适宜于直接安装在可燃物质表面的标志等资料。
• The products is of high water hydrophobe device usedin suitable and has the characteristics of aging resistance , resistance , tracking resistance , and corrosive resistance . it can withstand high bent load , strong impact force fn12 - 12 series indoor use high voltage load switch fn12 - 12 and fn12 - 12r is of three phases indoor use ac high voltage load switch for breaking and making the circuit of 50hz , 12kv system under rated loading
  Fn12 - 12和fn12 - 12r组合电器是额定电压12kv额定频率50hz的三相高压开关设备用于分合负荷电流闭环电流空载变压器和电缆充电电流关合短路电流配装接地开关的负荷开关，可以承受短路电流
• In view of this situation this article has conducted research to the design of metallurgy auxiliary biography with the frequency conversion table electrical machinery first multianalysis to the frequency changer and the frequency conversion table electrical machinery movement characteristic is carried out , the voltage waveform harmonious which the frequency changer outputs is big , attacks in a big way , and the voltage climbing rate reaches as high as 6600v / mu s which is 20 times ordinary sine alternating voltage , the rolling mill auxiliary biography table set the extremely strict request to the electrical machinery ; its movement frequency is very low , rate frequency in 8 - 20hz ; the velocity modulation scope is wide , the lowest movement frequency lowers to 1hz , and the starting number of times is quite frequently , each hour reaches as high as 600 - 800 time , the impact shoulders in a big way , the overload capacity request is high
  针对这一情况本文对冶金辅传用变频辊道电机的设计进行了系统研究。首先对变频器和变频辊道电机的运行特性进行详细分析,变频器输出的电压波形谐波大,冲击大,电压上升率高达6600v / s ,是普通正弦交流电压的20倍;轧机辅传辊道对电机提出了十分严格的要求:其运行频率很低,额定频率在8 - 20hz ;调速范围宽,最低运行频率低到0 . 5hz ,起动次数相当频繁,每小时高达600 - 800次,冲击负荷大,过载能力要求较高。

• 额定频率的日语：ていかくしゅうはすう