面积收缩率的英文

• percentage reduction of area

• "面积"英文翻译    area
• "收缩"英文翻译    contract; shrink
• "率"英文翻译    rate; ratio; proportion
• "喷嘴面积收缩率" 英文翻译 :    nozzle-contraction-area ratio
• "体积收缩率" 英文翻译 :    cubical contraction; volumetric shrinkage
• "面积收缩" 英文翻译 :    contraction in area; contraction of area
• "横断面积收缩" 英文翻译 :    reduction of cross-sectional area
• "断裂时的面积收缩" 英文翻译 :    contraction of area at fracture
• "收缩率" 英文翻译 :    contraction coefficient; contraction in percentage; contraction percentage; contraction ratio; degree of contraction; degree of shrinkage; o shrinkage; percentage of contraction; rate of contraction; rate of convergence; rate of shrinkage; shrinkage factor; shrinkage ratio; shrinking percentage; take up factor
• "收缩率，收缩化" 英文翻译 :    shrinkage ratio
• "热体积收缩" 英文翻译 :    volumetric thermal contraction
• "容积收缩" 英文翻译 :    volume contraction; volume shrinkage
• "体积收缩" 英文翻译 :    contraction of volume; shrinkage of volume; volume contraction; volume shrinkage; volumetric contraction; volumetric shrinkage
• "体积收缩量" 英文翻译 :    volume shrinkage mass; volumetric shrinkage
• "侧向收缩率" 英文翻译 :    lateral shrinkage
• "断口收缩率" 英文翻译 :    reduction of area at fracture
• "断面收缩率" 英文翻译 :    contraction of area; contraction of cross sectional area; contraction percentage of area; cross-sectional reduction; necking; percentage reduction in area; percentage reduction of area; percentagereductionofarea; reduction of cro section; reduction of cross sectional area; reduction of cross-sectional area; reduction of crosssection area
• "沸水收缩率" 英文翻译 :    boiling water shrinkage
• "干燥收缩率" 英文翻译 :    drying shrinkage
• "横向收缩率" 英文翻译 :    lateral shrinkage
• "计算收缩率" 英文翻译 :    die shrinkage
• "径向收缩率" 英文翻译 :    radial shrinkage ratio
• "卷曲收缩率" 英文翻译 :    crimp contraction
• "模压收缩率" 英文翻译 :    constriction allowance; die shrinkage
• "凝固收缩率" 英文翻译 :    fluid contraction; solidification shrinkage rate

• The area contraction ratio has obvious influence on the flow pattern , discharge , wall pressure and air pressure inside level rotary flow
  研究发现面积收缩率对流态、泄流量、壁面压强和空腔内的气体压强均有较大的影响。
• The influence of the area contraction ratio of rotary flow generator on the hydraulic characteristics of level rotary flow has been investigated by the hydraulic model test of an internal energy dissipation tunnel
  摘要通过模型试验，研究了起旋器出口面积收缩率对水平旋流泄洪洞水力特性的影响。
• For the larger area contraction ratio , the flow condition becomes more complicated , the discharge of the tunnel and the change of the negative pressure in the cavity pocket will be reduced , but the cavity diameter of the level rotary cavity flow and the dissipation ratio of the system will be increased
  面积收缩率较大时，流态变化复杂，泄流量和环流空腔内的负压的变化减小，但空腔环流的空腔直径和泄洪洞的消能率增大。