静子叶片的英文

• stationary blade
• stator blade
• stator vane

• "静"英文翻译    still; calm; motionless
• "子"英文翻译    son
• "叶片"英文翻译    blade vane; blade; paddle; l ...
• "出口静子叶片" 英文翻译 :    exhaust stator blade
• "浮动静子叶片" 英文翻译 :    stator floating blade
• "静子叶片的级" 英文翻译 :    stationary-blade stage
• "零级静子叶片" 英文翻译 :    zero-stage stator blade
• "涡轮静子叶片" 英文翻译 :    turbine stator blade
• "可调静子叶片调节器" 英文翻译 :    variable stator control
• "静子叶栅" 英文翻译 :    stationary blade row; stationary set of vanes
• "定子叶片" 英文翻译 :    stator blade; stator vane
• "滚子叶片泵" 英文翻译 :    roller vane pump
• "转子叶片" 英文翻译 :    rotor blades; rotor vane; spinner blade
• "变距定子叶片" 英文翻译 :    variable stator vane
• "涡轮转子叶片" 英文翻译 :    turbine rotor blade
• "转子叶片的级" 英文翻译 :    moving-blade stage
• "钻孔转子叶片" 英文翻译 :    drill motor rotor vane; drill-motor rotor vane
• "静子" 英文翻译 :    seishi; shizuko; stator; stay
• "中间级定子叶片" 英文翻译 :    inter-stage stator blade
• "转子叶片安装角" 英文翻译 :    rotor blade angle
• "转子叶片的固定" 英文翻译 :    anchorage of the rotor blade
• "子叶" 英文翻译 :    [植物学] cotyledon
• "静子环" 英文翻译 :    stator ring
• "全静子" 英文翻译 :    jingzi quan
• "森静子" 英文翻译 :    shizuko mori

• The propose of this project is to develop a three - dimensional , compressible navier - stokes solver for detailed study the flow inside transonic turbine and compressor ' s stator in the airplane turbomachinery
  摘要本研究的目的在发展一系列飞机滑轮引擎之静子叶片的计算流体力学方法与程式，计算程式方面包括三维叶片格点的建立与黏性流程式开发及撰写等，程式发展完成后将进行一系列外形及气流条件计算模拟。
• This paper uses the theory of design on parameters to achieve the software package of bss and the stator vane ’ s vibration and fatigue analysis software , which realize the process of stator vane ’ s vibration and fatigue use a key to control
  本文还采用了参数化的设计思想开发了盲源分离的软件包。同时课题期间还开发了静子叶片振动与疲劳分析平台软件,实现了整个叶片振动、疲劳特性分析的过程的“一键控制” 。
• In order to investigate the unsteady flow frequency domain performances of an axial flow compressor at different mass flow , rotating speed and blade row spacing , plus inlet flow distortion , and considering aerodynamic characteristics and stability of the compressor , the low speed research compressor ( lsc ) at college of energy and power in nuaa is used to carry out the experiment studies . a large amount of test data has been gained through dynamic pressure transducers embedded in the stator blades at the tip , middle and hub section , then fast fourier transform algorithm ( fft ) is applied to calculate the frequency data
  为探讨轴流压气机在工作流量、工作转速及动?静叶排轴向间距变化时的叶片排流场非定常频谱特性变化规律，并耦合进气畸变的影响，同时与压气机气动性能和气动稳定性相关联，作者利用南京航空航天大学能源与动力学院的低速大尺寸轴流压气机( lsc )试验器，采取在静子叶片表面埋入动态压力传感器的实验方法，对叶尖、叶中和叶根三个截面的动态压力进行了测量，获得了大量的可靠的实验数据。
• By using harika algorithm , the characteristic of a high - pressure compressor is calculated at different installation angle of the inlet guide vane and the stator vanes ; the characteristics of a high - pressure turbine and a low - pressure turbine are simulated at different installation angles of the guide vane based on ainley method
  本文用harika算法计算了导流叶片和静子叶片安装角度可调的变几何高压压气机特性；用ainley法计算了涡轮导向器面积可调的高压涡轮和低压涡轮的特性。