锥齿轮副的英文

• bevel gear pair

• "锥"英文翻译    awl awl-shaped things
• "齿轮"英文翻译    cogwheel; gear wheel wheel-l ...
• "副"英文翻译    assistant
• "螺旋锥齿轮副" 英文翻译 :    spiral bevel gear pair
• "等齿数整角锥齿轮副" 英文翻译 :    miter gears
• "非正交共轭圆锥齿轮副" 英文翻译 :    angular bevel gear
• "主动小锥齿轮和被动大锥齿轮副" 英文翻译 :    bevel pinion and bevel gear set
• "非正交共轭圆锥齿轮副, 斜交伞齿轮" 英文翻译 :    angular bevel
• "齿轮副" 英文翻译 :    gear pair; pair of gears
• "锥齿轮" 英文翻译 :    angle gear; beel gear; bevel gears; bevel wheel; bg; cone gear; conegear
• "变位齿轮副" 英文翻译 :    x-gear pair modified gear pair; x-gear pair, modified gear pair
• "端面齿轮副" 英文翻译 :    contrate gear pair
• "减速齿轮副" 英文翻译 :    speed reducing gear pair
• "开式齿轮副" 英文翻译 :    open gear pair
• "内齿轮副" 英文翻译 :    internal gear pair
• "增速齿轮副" 英文翻译 :    speed increasing gear train
• "正齿轮副轴" 英文翻译 :    spur wheel countershaft
• "伞齿轮，锥齿轮" 英文翻译 :    bevel gear
• "锥齿轮锥齿轮装置" 英文翻译 :    cone gear; conegear
• "高变位齿轮副" 英文翻译 :    gear pair with reference center distance
• "交错轴齿轮副" 英文翻译 :    gear pair with non-parallel
• "角变位齿轮副" 英文翻译 :    gear pair with modified center distance
• "螺旋伞齿轮副" 英文翻译 :    spiral bevel gear pair
• "内啮合齿轮副" 英文翻译 :    internal gear pair
• "平行轴齿轮副" 英文翻译 :    gear pair with parallel axes

• Bevel pinion and bevel gear set
  主动小锥齿轮和被动大锥齿轮副
• Bevel gear pair
  锥齿轮副
• 5 、 as adding the friction of the spiral bevel gear , the variety of the contact stress of teeth surface and the bending stress of teeth root vs the different meshing position are presented
  5 、初步探讨了考虑干摩擦的情况下,螺旋锥齿轮副动态啮合过程中齿面接触应力及齿根弯曲应力随啮合位置变化的规律。
• To sum up , the thesis mainly anaylses the performance of the aviation retarder spiral bevel gear in meshing , which results provide experiment for the design and improvement of the spiral bevel gear
  总之,本文主要对航空减速器螺旋锥齿轮啮合过程中的齿轮的啮合性能进行了分析研究,所得结论为螺旋锥齿轮副的设计和改进提供依据。
• The paper offers a viable method for the detection and evaluation of spiral bevel gears . this method can offer reference for amending of the gear tooth surface , and possesses important scientific and applied value for actual design and manufacture
  本文对航空弧齿锥齿轮副啮合质量的检测与评估提供了一种可行的方法，并能为齿面的修形提供参考依据，在实际设计和制造过程中有重要的科学与实用价值。
• The special purpose is for inspecting the position and noise of meshing section of quadrature taper pair , according to the inspecting result , this machine will guide milling gear machine to make a adjustment and begin to cut teeth again , finally , to satisfy the mesh request of taper gear pair
  本机床专用于检查正交锥齿轮副的啮合传动噪声，并可根据检查的结果，指导铣齿机的调整和重新切齿，最终达到锥齿轮副的啮合要求。
• In this paper , an intelligent system , which can check the compositive error along the pinion axis and can measure the vibration in location of bearing of headstock , is proposed , in pro / e is applied to design the mechanical structure and to construct the digital virtual prototype
  本文研究和开发的锥齿轮传动智能综合检测系统，能够进行锥齿轮副传动综合误差检测以及传动平稳性检测。利用pro / e设计检测系统的机械结构并建立虚拟数字样机。
• The paper describes the feature of double circular arc spiral bevel gears , basing on such gears manufacture theory , the paper depicts how to form the double circular arc spiral bevel gear tooth profile , at the same time , depicts its meshing theory and derives its tooth profile equation . basing on fsh short tooth , the paper derives the tooth depth equation , describes its manufacture technology , makes out this tooth propile single side method regulation calculation card
  本文从弧齿锥齿轮加工原理出发，阐述了双圆弧弧齿锥齿轮副点啮合齿面的形成原理，同时还论述了双圆弧弧齿锥齿轮基本啮合原理，推导出了具有普遍形式的齿面方程，同时以fsh短齿形为蓝本还推导出了双圆弧弧齿锥齿轮齿厚计算公式，阐述了双圆弧弧齿锥齿轮的制造工艺，编制了双圆弧弧齿锥齿轮单边切削法机床调整计算卡。

• 锥齿轮副的法语：couple conique