锥形冲头的英文

英文翻译手机版

"锥形"英文翻译 taper; cone; cone-shape
"冲头"英文翻译 head; formed punch; piercing ...
"波形冲头" 英文翻译 : punch with corrugated nose; punch with fluted nose
"成形冲头" 英文翻译 : forming punch
"钉形冲头" 英文翻译 : nail punch
"冲钉机；钉形冲头" 英文翻译 : nail punch
"锥形冲子" 英文翻译 : conical punch
"冲头锥形销退套楔漂移" 英文翻译 : drift
"冲头" 英文翻译 : [自动化] head; formed punch; piercing mandrel; plunger chip [tip]; punch pin [knife]; striking [former] block; hub; punch◇冲头半径 [设计] punch radius
"冲头锥形销退套楔流速偏航" 英文翻译 : drift
"t形冲片" 英文翻译 : t stamping; t-stamping
"锥形" 英文翻译 : [机械工程] taper; cone; cone-shape
"成形冲孔" 英文翻译 : shaping and piercing die
"成形冲孔模" 英文翻译 : shaping and piercing die
"仿形冲剪机" 英文翻译 : copying and punching shear machine
"环形冲模" 英文翻译 : ring die
"锯齿形冲裁" 英文翻译 : stagger blanking
"扇形冲槽机" 英文翻译 : segment notching machine
"扇形冲片" 英文翻译 : segmental punching; segmental stamping
"楔形冲箱" 英文翻译 : wedge plunger
"异形冲子" 英文翻译 : special shape punch
"钟形冲孔器" 英文翻译 : bell punch
"爪形冲击锤" 英文翻译 : cross chipper hammer
"鳄口形冲床" 英文翻译 : alligator punching machine
"冲床，冲头" 英文翻译 : punch

Tools for pressing . round punches with 60 degrees c conical head and reduced shank
冲压工具.带60锥形冲头和变径刀柄的圆冲头
Through using abaqus software , a numerical simulation of equivalent stress field of flanging deformation process with cone - shaped punch was carried out , and compared with simulation of flanging deformation with column - shaped punch
摘要利用abaqus商用软件，对锥形冲头翻边变形过程的等效应力场进行了数值仿真，并与柱形冲头的翻边变形仿真进行了对比。
General rules were validated and a new rule was discovered : i . e . the shape 0f these two stress fields are same , the equivalent stress of the round corner in the bottom reached its maximum at the first phase , the equivalent stress of the edge of hole reached its maximum at the third phase , the equivalent stress of flanging with cone - shaped punch descend more than that with column - shaped punch at the fourth phase i . e . the phase of deformation completed
验证了一般规律，也发现了新规律，即两者的应力场形状相同，底部圆角处等效应力在变形第1阶段最大，孔口边缘处等效应力最大出现在变形第3阶段，第4阶段（变形终了时）锥形冲头翻边的等效应力比柱形冲头翻边时下降更大。