铸造缺陷的英文

• casting defect
• casting fault
• casting flaw
• flaw in casting
• foundry defect

• "铸造"英文翻译    cast-on outwell; foundry; ca ...
• "缺陷"英文翻译    defect; flaw
• "抬芯(铸造缺陷)" 英文翻译 :    core raise
• "铸疵, 铸造缺陷" 英文翻译 :    foundry defects
• "铸疵，铸造缺陷" 英文翻译 :    foundry defects
• "有铸造缺陷的硬币" 英文翻译 :    fido
• "制造缺陷" 英文翻译 :    manufacturing defect; manufacturing deficiency; operational defect
• "木材构造缺陷" 英文翻译 :    defects of wood structure
• "制造缺陷分析程序" 英文翻译 :    manufacturing defects analyzer
• "制造缺陷分析程序（分析器）" 英文翻译 :    manufacturing defects analyzer
• "装备制造缺陷引起的故障" 英文翻译 :    materiel failure
• "对坏故障或制造缺陷有一年保修的钟" 英文翻译 :    a clock guaranteed for one year against mechanical failure or faulty workmanship
• "铸造上有缺陷的硬币" 英文翻译 :    brockage
• "构造缺失" 英文翻译 :    structural deficiency
• "铸造" 英文翻译 :    [冶金学] cast-on outwell; foundry; cast; casting; found; founding 蜡模铸造 investment casting; lost wax casting; 无砂铸造 sandless casting; 工人们正在铸造一座不锈钢的胸像。 the workers are casting a stainless steel bust.; 铸造厂 commercial foundry; jobbing foundry; 铸造成形 cast form; 铸造电炉 teeming furnace; 铸造工业 foundry industry; 铸造工艺 casting technique; foundry technique
• "缺陷" 英文翻译 :    defect; fault; faultiness; vitium; lesion; flaw; disorder; imperfection; drawback; blemish
• "铸造厂，铸造" 英文翻译 :    foundry
• "地膜（铸造）" 英文翻译 :    floor mold
• "迭模(铸造)" 英文翻译 :    stack mold
• "钢铸造" 英文翻译 :    steel foundry
• "浇口(铸造)" 英文翻译 :    gate
• "浇筒（铸造）" 英文翻译 :    foundry ladle
• "空吹（铸造）" 英文翻译 :    fore blow
• "冒口(铸造)" 英文翻译 :    gate riser
• "模制,铸造" 英文翻译 :    casting

• Study of a computer system for analyzing casting defect
  铸造缺陷的计算机分析系统的研究
• The relationship between green sand and quality of casting was described , and the influence of moulding sand on castings quality was analyzed
  摘要介绍了湿型砂性能和铸造缺陷之间的关系，分析了型砂性能对铸件质量的影响，以实例说明型砂综合性能分析。
• Abstract : the microstructure characterisic and distinctive defects of za27 alloy casting by centrifugal casting are expounded . the formation mechanism is analyzed in brief
  文摘:介绍了za27合金离心铸件的组织特点及其特有的铸造缺陷，对其形成原因进行了简要分析和阐述。
• Failure of cast aluminiuin alloy box was analysed by metallographic and fractographic analysis , and cast defect anti variation of cross section thickness were identified as main causes of failure
  通过金相及电镜断口分析，确定箱体失效系铸造缺陷和几何截面差过大所致。
• The influence of technological factors on the quality of dissolved mold casting of aluminium alloy was discussed , the connection between the process parameters and the flaw in casting was analyzed
  摘要讨论了各工艺因素对消失模铝合金铸造质量的影响，分析了各工艺参数与铸造缺陷之间的关系。
• Abstract : some kinds of defects in plate castings of gray cast iron are discussed , and varies kinds of gating systems and their advantages or disadvantages are analysed in this articles
  文摘:本文介绍了平板类灰铸铁件易产生的各类铸造缺陷及其在生产中常用的各种浇注系统，并分析了各类浇注系统的优缺点。
• Based on the new equilibrium solidification theory , the dispersed gate with flat 、 thin and wide rise neck , coupled with cold iron and warming riser , was adopted in the new gating system
  经分析主要原因是原工艺热冒口的冒口颈（内浇道）偏小，且开设的位置不合理，造成内浇道根部存在疏松和晶粒粗大铸造缺陷。
• Cae technics were used to design and optimize the process , estimate the defects in casting and realize the adaptation of the whole course by the process designing , checking , regulating and optimizing in series
  运用cae技术进行工艺优化，预测铸造缺陷，实现铸造工艺设计校核再设计优化设计的全过程调整。
• Based on the analysis for the reason causing choke , shrinkage and blow hole defects at two 216 bosses of the main plate of the offset machine , the method to eliminate the casting defects by carrying out qc activities was described
  对01胶印机左右大墙板的两个216圆台易出现呛火、缩孔和气孔缺陷的原因进行了分析,介绍了开展qc活动消除01胶印机左右大墙板铸造缺陷的方法。
• So far this company has developed a steel mold to manufacture products with advantages of flat , even wall thickness , compact structure , high strength , smooth outer wall and inner wall and free from cast bug , well received by the customers , with some products exported
  目前公司已开发一种钢模模具,其有平直、壁厚均匀、组织致密、强度高、内外壁光滑,无铸造缺陷等优点,受到广大用户的青睐,部分产品已出口

• 铸造缺陷的法语：Défaut de moulage
• 铸造缺陷的日语：いきず
• 铸造缺陷的阿拉伯语：عيب صب;