轴对称模型的英文

• axisymmetric model

• "轴对称"英文翻译    axial symmetry; rotational s ...
• "模型"英文翻译    model; pattern
• "不对称模式" 英文翻译 :    dissymmetric mode
• "对称模式" 英文翻译 :    symmetric mode
• "对称模式化" 英文翻译 :    symmetrical patterning
• "反对称模式" 英文翻译 :    antisymmetric mode
• "轴对称" 英文翻译 :    [数学] axial symmetry; rotational symmetry◇轴对称场 axially symmetric field
• "对称模糊关系" 英文翻译 :    symmetric fuzzy relation
• "双侧对称模式" 英文翻译 :    bilateral symmetrical pattern
• "轴对称流轴对称怜" 英文翻译 :    axially symmetric flow
• "轴对称；旋转对称" 英文翻译 :    rotational symmetry
• "【数学】轴对称。" 英文翻译 :    axial symmetry
• "单轴对称" 英文翻译 :    monosymmetrical
• "二轴对称" 英文翻译 :    bisymmetry
• "二轴对称的" 英文翻译 :    bisymmetrical
• "非轴对称的" 英文翻译 :    nonaxisymmetrical
• "非轴对称性" 英文翻译 :    nonaxisymmetry
• "零轴对称" 英文翻译 :    zero-axis symmetry
• "全轴对称" 英文翻译 :    holoaxial symmetry
• "轴对称变形" 英文翻译 :    axial sysmmetric deformation; axisymmetric deformation; axisymmetrical deformation
• "轴对称槽" 英文翻译 :    channel of axial symmetry
• "轴对称场" 英文翻译 :    axially symmetric field
• "轴对称单元" 英文翻译 :    axisymmetric element
• "轴对称导管" 英文翻译 :    axisymmetrical duct
• "轴对称的" 英文翻译 :    axial symmetric; axisymmetrical

• The magnetic circuit in the actuator was optimized by a 2d axisymmetric model with fem
  通过建立超磁致伸缩微致动器的2d轴对称模型，利用有限元方法对微致动器的电磁结构进行优化。
• To predict the settlement of surrounding soils during excavation , axisymmetric model was established in fem software to analyze the problem by use of fem based on the biot ' s consolidation theory
  为预测基坑开挖及降水过程中周围土体的沉降，本文采用基于比奥固结理论的有限单元法在大型有限元软件中建立轴对称模型进行了分析。
• According to the working modes of mr devices , combining the ohm ' s law of magnetic circuit and the design theory of non - steady magnetic circuit , magnetic structures of the automotive damper have been worked out . to emulate the performance of conventional shock absorber , two automotive mr dampers were designed and fabricated at chongqing university . an applied magnetic field increase the yield stress of mr fluids in flow annular passages , which alters the velocity profile of mr fluid in the passages and raise the pressure gradient between low cavity and high one at some given flow rates
  根据磁流变阻尼器工作模式，利用磁路中的欧姆定律和动态磁路设计原理，结合汽车悬架的技术要求和结构特点，提出了基于剪切模式和流动模式共同作用（混合工作模式）的汽车磁流变阻尼器设计原理，讨论了阻尼器动态磁路设计中的若干技术问题；根据流体力学navier - stokes方程，分别利用newton流体特性和bingham流体特性，推导了基于平板模型和轴对称模型的流变学方程，得出了阻尼器阻尼力的计算方法。
• The temperature and stress field of wagon wheel under the condition of long ramp way cycle braking in daqin line have been simulated by using fem and axial symmetry model results indicate that high stress area appears on the wheel web , and the strength of wheel meets the requirement of routine operation under current braking condition
  摘要采用轴对称模型和有限元方法，模拟了大秦线长大坡道循环制动条件下货车车轮温度和应力场，结果表明车轮高应力区出现在辐板上，现行制动条件下车轮强度满足使用要求。
• According to the test result , the mechanism of inorganically post - installed bars with cone - shaped heads was analyzed . and then the anchor intensity formula was formulated . the inorganically post - installed bars with cone - shaped head was carried on the finite element analysis on the spatial axial symmetry model
  根据试验结果,对带锥头无机植筋的受力机理进行了理论分析,推导出带锥头无机植筋的锚固强度公式,并利用空间轴对称模型对带锥头无机植筋进行了有限元分析,提出了利用杆单元模拟钢筋与混凝土之间的粘结滑移关系的方法。