负载等的英文

• load dispatch

• "负载"英文翻译    load
• "等"英文翻译    class; grade; rank
• "负载等盘" 英文翻译 :    load dispatching board
• "负载等效" 英文翻译 :    load equivalent
• "负载等员" 英文翻译 :    load dispatcher
• "荷载等级" 英文翻译 :    class of loading
• "加载等温淬火" 英文翻译 :    austemper stressing
• "负载" 英文翻译 :    [电学] load 高峰负载 peak load; 工作负载 operating load
• "半负载" 英文翻译 :    half load; halfload; load, half
• "泵负载" 英文翻译 :    pumload
• "变负载" 英文翻译 :    changing load; varying duty
• "超负载" 英文翻译 :    overburden; overload
• "初负载" 英文翻译 :    vorlast preload
• "磁负载" 英文翻译 :    magnetic loading
• "呆负载" 英文翻译 :    dead load
• "等负载" 英文翻译 :    even load
• "低负载" 英文翻译 :    low latency; low-load; underload
• "底负载" 英文翻译 :    bed load; bed-material load; deadload; quiescent load
• "点负载" 英文翻译 :    pol
• "电负载" 英文翻译 :    electric load; electrical load
• "定负载" 英文翻译 :    fixed load; fixedload
• "动负载" 英文翻译 :    dynamic loading; dynamical load
• "多负载" 英文翻译 :    multi-load
• "峰负载" 英文翻译 :    peak load
• "风负载" 英文翻译 :    wind load

• Load dispatching board
  负载等盘
• The system satisfied all requirements , such as response speed , system loading and so on
  本系统的各项指标(如系统响应速度、系统负载等)均达到了指定的要求。
• The product has good over load - proof and con corona - proof features , it is widely used in windings of electric machines and appliances
  该产品具有抗电晕、过负载等特点，广泛用于电机电器的绕组。
• The product has good over load - proof and con corona - proof festurs . it is widely used in windings of electric machine and appliances
  该产品具有抗电晕、过负载等特点，广泛用于电机、电器等绕组。
• It can not only tolerate intrusions and banlance loads , but also can scale flexibly and work robustly , and do not exist single - failure components
  它不仅具有入侵容错、均衡负载等功能，同时具有灵活的扩充能力和很好的强健性，消除了可能“单点失效”的组件。
• Assume a furnace will require approximately 24 , 000 watts after all heat losses and load factors have been considered . increasing this 24 , 000 by 25 % to 50 % gives a wattage requirement of between 30 , 000 and 36 , 000 watts
  假定在考虑了热量散失和负载等因素之后一个熔炉大约需要24000瓦的能量。将这个功率值增加25 %到50 %之后所需的功率在30000瓦到36000瓦之间。
• Assume a furnace will require approximately 20 , 000 watts after all heat losses and load factors have been considered . increasing this 20 , 000 by 25 % to 50 % gives a wattage requirement of between 25 , 000 and 30 , 000 watts
  假定在考虑了热量散失和负载等因素之后一个熔炉大约需要20 , 000瓦的能量。将这个功率值增加25 %到50 %之后所需的功率在24 , 000瓦到30 , 000瓦之间。
• Numerical results are given to demonstrate the effects of several factors including the number of basis functions , the thickness of waveguide , the terminations of waveguide and different frequency on the radar cross section ( rcs ) of a slot array
  物理光学法用于有限电尺寸导体平板散射的分析。文中给出了缝隙阵列在不同频率、基函数个数、波导厚度、终端负载等情况下的计算结果。
• By comparison , implicit euler is better method as a kernel of transmission line simulation computing and programming to transmission line transient with different conditions of boundary and two line coupling or even more complicated internal switching or loading
  本文对传输线在不同边界条件、传输线耦合、线路内部突然开路、短路、接内部接各种负载等情况下的暂态过程进行编程计算的到仿真波形。
• So they can not be used in on - line fault detection and condition monitoring . and the explanation of the time - frequency analysis is not easily accepted by the engineers . the experimental factors , such as rotational speed and measured position and fault distribution a
  文中还针对转速、测点位置、故障分布(位置) 、负载等因素对频谱分析、包络分析、时延相关解调等方法的诊断效果进行了大量的实验研究。