表面气泡的英文

• surface air boil

• "表面"英文翻译    surface; superficies; bounda ...
• "气泡"英文翻译    air bubble; bubble; bubble c ...
• "海面气泡层" 英文翻译 :    sea surface bubble layer
• "表面气干的" 英文翻译 :    surface dry
• "表面气孔" 英文翻译 :    exposed porosity; skin hole; surface blowhole; surface pores; surface porosity
• "表面气体" 英文翻译 :    surface gas
• "上表面气孔" 英文翻译 :    top surface porosity
• "上表面气孔(铸孔)" 英文翻译 :    tosurface porosity
• "表面下气泡" 英文翻译 :    blosters
• "气泡表面" 英文翻译 :    gassy surface
• "气泡表面稳定性" 英文翻译 :    bubble surface stability
• "气泡" 英文翻译 :    air bubble; bubble; bubble cell; pin hole 像气泡一样化为乌有 vanish like a bubble; 水里的气泡 a bubble in water; 气泡破了。 the bubble has burst. 水从沙里冒出气泡。 water bubbled up through the sand
• "地面气" 英文翻译 :    atmospheric gasoil ratioo
• "壁面气化核" 英文翻译 :    wall nuclei
• "场面气压" 英文翻译 :    aerodrome pressure; air field level pressure; field elevation pressure; qfe; station pressure
• "地面气瓶" 英文翻译 :    ground-bottle
• "地面气温" 英文翻译 :    surface air temperature
• "地面气象图" 英文翻译 :    surface chart
• "地面气象站" 英文翻译 :    surface weather station
• "地面气压" 英文翻译 :    ground barometric pressure; surface pressure
• "定高面气球" 英文翻译 :    constant level balloon
• "反面气刨" 英文翻译 :    back gouging
• "锋面气旋" 英文翻译 :    frontal cyclone; mid-latitude cyclone
• "海平面气压" 英文翻译 :    sea level pressure; sea-level pressure; sea－level pressure
• "两面气孔的" 英文翻译 :    amphistomatic; amphistomatous

• The origin of these particles is believed to be almost exclusively the jet drops formed during the bursting of bubbles at the ocean surface .
  我们认为海洋表面气泡破裂时形成的水滴差不多是这些粒子的唯一来源。
• The bubble diameter increases with air flow rate , air pressure , orifice diameter and the solution depth , and decreases with the orifices number and liquid viscosity
  在静态水模拟实验条件下获得了液体表面气泡直径预测模型。
• Furthermore , the problem of the concrete surface bubbles during the concrete placement is also effectively controlled with the optimal vibrating parameters got from the experimental study made on the vibration of the concrete placement
  在混凝土浇筑过程中，通过对混凝土振捣参数进行试验研究，取得了最佳参数，有效地控制了混凝土表面气泡问题。
• Moreover , the resulted prediction model of foam size of the closed cell aluminum foam was verified by comparison to the experimental results from the foaming process at different foaming conditions , and the predicted bubble diameter is in good agreement with the experimental ones , the relative error distributes between - 5 . 04 % and 6 . 32 %
  当入射空气的压强、气流量，液面高度，出气孔直径增大时，气泡直径随之增大；当出气孔数量，液体粘度增大时，气泡直径减小，表面张力对气泡直径的影响可以忽略不计；静态条件下液体表面气泡直径的预测值和实验测量值符合得较好，相对误差分布在- 5 . 04 % ~ 6 . 32 %之间。
• Abstract : in construction of large - scale high - class highway project to eliminate the surface bubbles that could form surface defect on concrete works is always a knotty problem for construction technician and supervising personnel . focusing on this problem the possible reasons were analyzed and the corresponding solutios were given out in this paper
  文摘:在高等级公路大规模建设中，消除砼表面气泡是很多施工技术人员和监理工作者常遇到而又感到棘手的问题.针对这一问题，分析气泡产生的原因，采用相应的措施，找出相宜的办法予以解决，是本文的主旨

• 表面气泡的法语：soufflure périphérique
• 表面气泡的日语：スキンホール ひかきほう