耐磨蚀的英文

• antifret

• "耐磨"英文翻译    abrasion resistant; anti-fri ...
• "蚀"英文翻译    lose
• "耐磨蚀碳黑" 英文翻译 :    abrason-resistant carbon black
• "耐磨蚀性" 英文翻译 :    resistance to abrasion
• "耐磨蚀轴承" 英文翻译 :    corrosion resisting bearing
• "耐磨蚀节流器" 英文翻译 :    sand choke
• "易变耐磨蚀性" 英文翻译 :    variable corrosion resistance
• "磨蚀" 英文翻译 :    abrasion; abrasive wear; fretting corrosion; erosion; sandblast
• "工业瓷器茨漆的耐磨蚀的试验方法" 英文翻译 :    standard test methods for abrasion resistance of porcelain enamels
• "耐磨" 英文翻译 :    abrasion resistant; anti-friction; wear resistant; wear-resisting; wearproof◇耐磨材料 high-abrasive material; anti-friction material; 耐磨度 abrasion resistance; 耐磨性 abradability; resistance to abrasion; resistance to wear; resistance to wear and tear; wear lessness; wear property; wearability; wear resistance; abrasion resistance
• "耐磨性,耐磨度" 英文翻译 :    wear resistance
• "防磨蚀" 英文翻译 :    erosion resistance
• "风磨蚀" 英文翻译 :    wind abrasion
• "磨光，磨蚀" 英文翻译 :    abrade
• "磨耗；磨蚀" 英文翻译 :    abrasion
• "磨蚀，擦伤" 英文翻译 :    abrade
• "磨蚀，磨损" 英文翻译 :    abrasive wear
• "磨蚀，研磨" 英文翻译 :    abrasiveness
• "磨蚀；海蚀" 英文翻译 :    abrasion
• "磨蚀；刻蚀" 英文翻译 :    corrasion
• "磨蚀的" 英文翻译 :    abraded; abrasive; corrasive
• "磨蚀度" 英文翻译 :    abrasiveness; abrasivity; degree of abrasion
• "磨蚀机" 英文翻译 :    abrader
• "磨蚀剂" 英文翻译 :    abradant; abrasive paste; buffing filler
• "磨蚀卡" 英文翻译 :    abrasive card

• The objection to the placer origin have centred around the softness of uranium compounds .
  反对砂矿成因的论据主要是：铀的化合物不耐磨蚀。
• Standard test methods for abrasion resistance of porcelain enamels
  工业瓷器瓷漆的耐磨蚀的标准试验方法
• Inadequate resistance to abrasive wear will lead to rapid loss of clearances and drop in pump performance
  如果耐磨蚀能力不足，则将导致间隙迅速增大和泵性能下降。
• Yet , other polymer - coating materials are being used for protection against corrosion , aggressive chemical environments , thermal shock , impact , wear , and abrasion
  甚至，还有的聚合物涂料被用于防腐蚀，防化学环境的侵蚀，防热冲击，防冲击，防磨损、耐磨蚀的方面。
• The need for resistance to both adhesive and abrasive wear is often greatest in wear rings and similar components , where close clearances must be maintained between rotating and stationary components
  通常，须在转子与定子之间保持较小间隙的零件，如密封环及类似零件，有耐磨蚀和耐磨损的要求。
• X - ray diffraction spectrum , empa methods and several tests including mechanical properties , electrochemistry , corrosion wear , on - site plate hanging , the microstructure of steel has been observed and analyzed , performance has been studied , and corrosion - abrasion , fragility mechanism , and microalloy application in ferritic stainless steel have been explored comprehensively . the test results of electrochemistry , corrosion wear and on - site plate hanging have been analyzed . the analytical result shows that crsomo has enough corrosion resistance in phosphoric acid slurry because it has high chromium and low carbon
  通过实验室的电化学试验、腐蚀磨损试验和磷肥厂的现场挂片试验结果分析，表明： cr30mo铁素体不锈钢高铬低碳的配合，保证其在磷酸料浆中具有足够的耐蚀性： cr30mo中( fe ， cr ) _ 23c _ 6 、 ( fe ， cr ) _ 7c _ 3 、 mo _ 2c 、等碳化物硬质点从基体的弥散沉淀析出可提高钢的硬度和耐磨性，使得钢在磷酸料浆中具有良好的耐磨蚀效果。
• So cr30mo has good corrosion - abrasion resistance in phosphoric acid slurry . based on the analyses of microstructure , mechanical properties , corrosion - abrasion resistances and fracture of cast ferritic stainless steel cr30mo with various carbon content , it can be affirmed that high carbon is advantage to increase steel hardness , but disadvantage to suppress brittleness and increase corrosion - abrasion resistance
  对不同含碳量的铁素体不锈钢cr30mo的组织结构、力学性能、磨蚀性能和断口形貌的分析后认为，碳含量增大，对钢的硬度提高有利，但对钢的韧性、耐磨蚀性很不利。