给进的英文

• feed
  ◇给进弓形杆 chopper bar

• "给"英文翻译    supply; provide
• "进"英文翻译    advance; move forward; move ...
• "给进头" 英文翻译 :    feeder head
• "手给进" 英文翻译 :    hand feed
• "棒材给进机" 英文翻译 :    rod feeder
• "不均匀给进" 英文翻译 :    erratic feeding
• "电极给进" 英文翻译 :    electrode feed
• "反向给进" 英文翻译 :    reverse feed
• "给进长度" 英文翻译 :    length of feed
• "给进弓形杆" 英文翻译 :    chopper bar
• "给进机构" 英文翻译 :    feed mechanism
• "给进式布局" 英文翻译 :    feed-through placement; feedthrough placementt; placement, feed-through
• "给进速度" 英文翻译 :    feed speed
• "给进行程" 英文翻译 :    feed travel
• "给进压力" 英文翻译 :    feed pressure
• "给进装置" 英文翻译 :    feeding device
• "机械给进" 英文翻译 :    power feed
• "棘轮给进" 英文翻译 :    ratchet feed
• "交叉给进" 英文翻译 :    crossfeed
• "径向给进" 英文翻译 :    radial feed
• "快速给进" 英文翻译 :    fast feed
• "螺杆给进器" 英文翻译 :    temper screw
• "脉动给进" 英文翻译 :    pulsating feed
• "强迫给进" 英文翻译 :    force-feed; positive feed
• "强制给进" 英文翻译 :    positive feed

• 10 maximum thrust force of top drive power head 30 kn
  10动力头最大给进力30 kn
• 10 maximum thrust force of top drive power head 15 kn
  10动力头最大给进力15 kn
• Maximum thrust force of top drive power head 15 kn
  9动力头最大给进力kn 15
• 7 lifting capacity of power head 45 kn
  7动力头给进力40kn
• Pindlemax feed lifting force
  立轴最大给进起拔力：
• Auto feed driller
  自动给进器
• Compared different on oxygen content , temperature under three configurations . discover that nitrogen oxide emission is lower outstanding in the fuel / 2nd air counter flow configuration than other two configurations and try to discuss this reason
  分析了不同构型下温度变化的特点，对氮氧化物生成的影响，在空气与燃气逆向给进的构型中，氮氧化物生成量明显低于其它方式。
• On the basis of this , the hydraulic system of the mkd - 5s drilling machine is resigned for improvement . specially energy - saving design of the feeding system is made and the control characteristic of the electro - hydraulic proportional controlled system of feeding is studied both in theory and in experiment
  在此基础上，应用电液比例技术对mkd ? 5s型钻机液压系统进行了改造设计，重点对给进系统进行了节能设计，从理论和实验两方面对给进加压电液比例控制系统的特性进行了研究。
• The result of the study shows that the electro - hydraulic proportional technology is useful for all - hydraulic operated drilling machine to simplify the operations and composition of system , to improve the level of automatization and efficiency and to reduce the consumption of energy . the result of the study also shows that the system of feeding has the properties as followed : fast respone , stable pressure - adjusted characteristic , distinct effect of energy - saving , some improvement of system efficiency
  研究结果表明：全液压钻机中应用电液比例技术，可以简化系统组成和操作，提高钻机自动化水平，提高系统效率，降低发热和温升；采用恒压变量泵的给进加压电液比例控制系统调压性能稳定、响应快、节能效果明显。