粗节的英文

• slub

• "粗"英文翻译    wide; thick
• "节"英文翻译    joint; knob; node
• "除粗节" 英文翻译 :    slub catching
• "粗节纱" 英文翻译 :    tufted yarn
• "小粗节" 英文翻译 :    knots
• "初生丝粗节" 英文翻译 :    capillary thickening
• "粗节花线" 英文翻译 :    seed yarn; spot yarn
• "粗节生成" 英文翻译 :    nub formation
• "花式粗节" 英文翻译 :    slub
• "粗接合" 英文翻译 :    rustic joint
• "粗接缝" 英文翻译 :    rusticated joint
• "粗接" 英文翻译 :    rustic joint
• "粗捷效应" 英文翻译 :    dellinger effect
• "粗绞馅香肠" 英文翻译 :    coarse cut sausage
• "粗结" 英文翻译 :    nubs
• "粗绞肉机" 英文翻译 :    meat shredder

• Presence of foreign fibers , neps and thick place
  存在异性纤维、棉结和粗节。
• By comparison with the conventional acid treated aprons regrading spinning performance , the paper puts forth the ultra - vialate rayed aprons can reduce cv value and neps and other defects in yarns
  摘要通过与普通酸处理胶圈进行试纺对比，指出了紫外线光照胶圈在实际应用中可降低细纱条干cv值和细节、粗节及棉结等纱疵。
• Abstract : through comparative spinning experiments and anylyse of working principle , it is concluded that the yarn quality is raised , and the cv % value of eveness , slubs , nips and neps are reduced markedly by the use of high accuracy rollers without mechanical wave
  摘要通过对罗拉的工作原理进行分析，经过纺纱试验对比，得出高精度无机械波罗拉可以提高纺纱质量，成纱的条干cv %值、粗节、细节、棉结都有明显改善。
• Then all manufactories of spinning frames and cotton mills try to shorten the gauge between front and middle rollers and make the center distance reduce to 42 - 43mm , but the distances are still so longer , thin and thick slubs when spinning purified cotton are distinctly more than that nitto model drafting , which have been hindering the cotton mills to improve the quality of cotton spinning all along
  因此各细纱机制造厂和棉纺厂都在想方设法把前、中罗拉隔距缩小，中心距缩小至42 43毫米，但还是偏大，纺纯棉时细节、粗节明显比原先的日东式牵伸多，一直困扰着棉纺厂提高棉纺质量。
• This article has primarily analyzed the reason of the influence of the third generation of long drafting technology on the product quality , holding that by use of the third generation of long drafting technology , the friction force of the nips is increased , the floating fiber is effectively controlled , fiber speed changing point goes forward and fiber movement is more stable which lead to the improvement of product quality with obvious reduction of thin or thick places and neps
  摘要对细纱机第三代大牵伸工艺影响产品质量的机理进行了分析，认为采用第三代大牵伸工艺后，钳口的摩擦力界得到增强，浮游纤维得到有效控制，纤维变速点集中而前移，纤维的运动更趋平稳，产品质量有所提高，特别是每千米细节、粗节、棉结明显下降。

• 粗节的日语：スラブ