粗糙度值的英文

• roughness height (or magnitude)

• "粗糙度"英文翻译    harshness; roughness; rugosi ...
• "值"英文翻译    price; value
• "粗糙度" 英文翻译 :    harshness; roughness; rugosity; coarseness; degree of roughness; roughness concentration
• "壁粗糙度" 英文翻译 :    wall roughness
• "壁面粗糙度" 英文翻译 :    wall roughness
• "表面粗糙度" 英文翻译 :    finish; pimple; roughne of the surface; roughness of surface; roughness of the surface; surface a erities; surface asperities; surface roughness factor; surfaceness
• "冰粗糙度" 英文翻译 :    ice roughness
• "层粗糙度" 英文翻译 :    bed roughness; bedroughne
• "粗糙度；凸起" 英文翻译 :    pimpling
• "粗糙度比" 英文翻译 :    roughness ratio
• "粗糙度标度" 英文翻译 :    scale of roughness
• "粗糙度表" 英文翻译 :    roughness meter
• "粗糙度参数" 英文翻译 :    roughness parameter
• "粗糙度测量" 英文翻译 :    roughness measurement
• "粗糙度超标" 英文翻译 :    pps high ucl
• "粗糙度峰值" 英文翻译 :    roughness; rugosity
• "粗糙度符号" 英文翻译 :    finish mark
• "粗糙度高度" 英文翻译 :    height of roughness; roughness height
• "粗糙度计" 英文翻译 :    roughmeter
• "粗糙度结构" 英文翻译 :    roughness pattern
• "粗糙度宽度" 英文翻译 :    roughness width
• "粗糙度谱" 英文翻译 :    roughness spectrum
• "粗糙度系数" 英文翻译 :    coefficient of roughness; coefficient of rugosity; roughne coefficient; roughness coefficient; roughness factor; roughness value
• "粗糙度效应" 英文翻译 :    roughness effect
• "粗糙度仪" 英文翻译 :    roughmeter; surface roughness measuring instrument

• Then , predicting the optimum performance and validating the optimum cutting conditions by using a confirmation experiment
  预测经最优切削参数加工得到的表面粗糙度值，最后通过确认实验验证了其正确性。
• Studies experimentally the pressure drop of two common kinds of flexible duct in fully extended state and obtains their absolute roughness
  通过实验研究了两种常用柔性风管在全伸展状态时的压力损失，得出了它们的绝对粗糙度值。
• The results indicated that the crystal particles in coatings were mostly rutile , and the size of the rutile was in a micrometer grade . the surface roughness of coatings was different
  发现制备的二氧化钛功能涂层中晶粒尺寸为微米级，晶型主要为金红石型二氧化钛，表面粗糙度值大小不一。
• The nanoparticles coating was fabricated by cladding titanium alloys with nano - tio2 powders , and its surface roughness was 2 . 1 - 2 . 3 m which was smaller than that of ordinary titanium dioxide coatings
  用纳米二氧化钛粉包埋钛合金试样烧结制备的涂层表面粗糙度值ra在2 . 1 2 . 3 m之间，相对于普通二氧化钛粉包埋烧结的涂层来说，粗糙度较低。
• Secondly , the steel balls millstone is used to grind steel ball in ones steel ball factory , and process flocculus the steel balls that possess reticulate veins surface . measure the result as follows : ra ( surface roughness of steel ball ) = 0 . 015 u m , wavmess = 0 . 06 um , sph ( deviation from spherical form ) = 0 . 010 u m , vdwl ( variation of ball lot diameter ) = 0 . 015 u m
  然后利用制成的钢球研磨板对钢球进行超精磨削加工，加工出了表面具有网状纹理形貌的“绒面”钢球，利用仪器测量钢球表面的粗糙度值达到了0 . 015 m ，表面波纹度值达到了0 . 006 m ，圆度达到了0 . 010 m ，球批直径变动量小于0 . 015 m 。