磨料磨损的英文

• abrasion wear
• abrasion, abrasive wear
• grinding abrasion

• "磨料"英文翻译    abrasive; grinding compound; ...
• "磨损"英文翻译    wear and tear; abrasive wear ...
• "流体磨料磨损" 英文翻译 :    hydroabrasive wear
• "旋转式磨料磨损试验机" 英文翻译 :    rotary abrasive tester
• "磨料磨具" 英文翻译 :    abrasives
• "散磨料磨蚀" 英文翻译 :    loose abrasive abrading
• "熟料磨料机" 英文翻译 :    grog mill
• "塑料磨料" 英文翻译 :    plastic abrasive
• "用磨料磨" 英文翻译 :    gritting
• "材料磨损过程" 英文翻译 :    progress of material wear
• "弘腾磨料磨具有限公司" 英文翻译 :    ost
• "金刚石与磨料磨具工程" 英文翻译 :    diamond &abrasives engineering
• "磨料磨具进出口公司" 英文翻译 :    abrasives export corporation; abrasivesexport corporation
• "郑州磨料磨具磨削研究所" 英文翻译 :    zhengzhou institute of abrasive grinding apparatus and grinding technology; zhengzhou institute of abrasive, grinding apparatus and grinding technology
• "中国磨料磨具进出口公司" 英文翻译 :    caec
• "上海诺顿磨料磨具有限公司" 英文翻译 :    shanghai abrasive and grinding tool company
• "中国磨料磨具出口联营公司" 英文翻译 :    china abrasives export corp
• "磨料" 英文翻译 :    abrasive (material); grinding compound; grinding material; abradant◇磨料粒度 abrasive grain
• "磨损" 英文翻译 :    wear and tear; abrasive wear; abrase; abrade; detrition; wear; scuff; wear-out; fray; battering; abrade wear; abrasion; attrition wear; defacement; excoriate; foreworn; wear down; wearing; wornout 我的鞋跟给磨损了。 the heels of my shoes have (been) worn down. 这辆卡车基本上没有什么磨损。 the truck shows scarcely any sign of wear and tear.; 磨损程度 degree of wear; 磨损度 abradability; 磨损腐蚀试验 erosion corrosion test; 磨损检验 examine for wear; 磨损留量 wear allowance; tear-and-wear allowance; 磨损试验 [土] attrition test; abrasion test; 磨损试验机 abrasion tester; abrasive wear testing machine; wear-test machine; 磨损数据 wear data; 磨损速度 rate of wear; 磨损系数 coefficient of waste; coefficient of wear; wear coefficient; mortality factor; 磨损作用 abrasive action
• "生料磨" 英文翻译 :    raw meal mill; raw mill; reaction mill
• "熟料磨" 英文翻译 :    clinker grinding mill
• "送料磨" 英文翻译 :    feed mill
• "涂料磨" 英文翻译 :    kady mill
• "颜料磨" 英文翻译 :    color mill; colour mill
• "原料磨" 英文翻译 :    raw material grinding mill; raw mill

• Eutectic composition should be adopted for high - cr white cast iron used under high - stress impact abrasion condition
  摘要高应力冲击磨料磨损时，高铬白口铸铁应选共晶成分。
• 28cr high chromium cast iron is one of primary wear resistance materials , which is in use at present . it shows superior performance in corrosion wear and abrasive wear
  28cr高铬铸铁是目前使用的主要的抗磨材料之一，在抵抗腐蚀磨损和磨料磨损中表现出优越的性能。
• The sem photos show the wear mechanisms of pure up are fatigue detachment and light cut form , but wear mechanisms of nanocomposites are abrasive filler wear and adhesion wear
  并通过sem照片分析确定纯不饱和聚酯的磨损为疲劳剥离和擦伤形式，复合材料为磨料磨损和粘着磨损。
• Under the conditions of low stress abrasion , eutectic composition is the optimal composition of high - cr white cast iron . the narrow intercarbide spacing is quite benefical to protect the austenitic matrix
  摘要低应力磨料磨损条件下，高铬白口铸铁以共晶成分为宜，在细小的共晶组织中，碳化物间的短小空间对共晶奥氏体起到良好的保护作用。
• The age hardening characteristic of as - cast cu20ni20mn and cu20ni35mn alloys and the interface characteristic between the alloy and cast tungsten carbide were studied , and on the basis of this study , composites of cu - ni - mn alloy reinforced with different volume fraction ( 0 - 45vol . % ) and different size ( 42 - 362 m ) of cast tungsten carbide particles were made by vacuum hot - pressing liquid sintering technology . pin on disk two body abrasion tests have been performed with different size of sic abrasive under different loads
  本文研究了铸态cu20ni20mn和cu20ni35mn合金的时效硬化特性及其与铸造碳化钨的界面特性，并在此基础上以不同尺寸( 42 362 m )的铸造碳化钨颗粒为增强体，采用真空热压液相烧结技术制备了不同颗粒含量( 0 45vol . )的铸造碳化钨颗粒增强cu - ni - mn合金基复合材料；以不同粒度的sic为磨料，在不同载荷条件下利用销?盘磨损试验机测试了复合材料的二体磨料磨损性能。
• Secondly , choose the sample component , as different particle match of tungsten carbide and specifically heat treatment craftworks of solution and aging manufacture test piece , watch metallurgical structure of the test piece and do the tests of hardness and tension , at last do the abrasive wear test on the dynamic load abrasive wear test machine , analyze test datum , from the test data , conclusions are arrived that the hardnees of composite - alloy can be improved and wear - resistance be better by adding cr and other elements according to a given ratio
  本文对rp中速磨煤机耐磨件进行了运行与磨损情况分析，研究、提出了制备磨辊和盘瓦复合合金成分配比；并对制作的试件进行了固溶、时效等特定的热处理工艺，观察试件金相组织，进行机械强度试验，最后做磨料磨损试验，对磨损失效机理进行了深入的研究分析，对其耐磨性能与低合金钢、高铬铸铁进行了对比。
• The results show that the composites were more wear resistant than the matrix , contributing to the " volume effect " and " size effect " , the wear resistance increases with the particle content and size . the composite shows better wear resistance than high chromium cast iron material especially in low load and fine abrasive test condition . the results also indicate that the composite strengthened by ageing treatment was more wear resistant than as - cast composite
  磨损试验结果表明，铸造碳化钨颗粒增强cu - ni - mn合金基复合材料具有比较高的抗磨料磨损能力，而且其耐磨性随着铸造碳化钨颗粒体积分数及尺寸的增大而提高，表现出了强烈的“体积效应”及“尺寸效应” ，尤其是在低载荷、细磨料磨损条件下，复合材料表现出更好的而寸磨性，即使与高铬铸铁( cr28 )相比也有很大程度的提高。
• And also , the wear resistance at ambient temperature and of za27 alloyed with mn when lightly loaded is desirable but becomes worse at high temperature . the wear mechanism of the one mixed with both adhesive and abrasive wear under sliding friction conditions ( at high temperature )
  Si的加入量为1 - 3时， za27合金的磨损量最少，高温摩擦性能最好；加入mn后， za27合金在低温轻载下耐磨性能较好，高温耐磨性能不理想；在滑动摩擦条件下(高温)的磨损以粘着磨损和磨料磨损两种方式共同存在。
• Filling cu or cuo powder has changed the wear mechanism of rubbing pairs of uhmwpe - steel . when pure uhmwpe pairs up with steel , adhesive wear takes place . but after the cu or cuo power are putted in , adhesive wear and abrasive wear take place at the same time , and the percentage of abrasive wear increases accordingly with the increase of filler
  填料的加入改变了uhmwpe与钢配副时的磨损机理，纯uhmwpe与钢配副时的磨损机理是粘着磨损，加入填料后变为粘着磨损与磨料磨损共存的状态，而且随着填料含量的增加，磨料磨损所占的比重上升。