短路过渡的英文

发音:

"短路过渡"怎么读用"短路过渡"造句

英文翻译手机版

dip-transfer
short circuiting transfer
short-circuiting transfer

"短路"英文翻译 short; short circuit; cuttin ...
"过渡"英文翻译 transition; transit
"短路过渡方法" 英文翻译 : short circuiting transfer technique
"短路过渡过程" 英文翻译 : short circuit transition
"短路过渡焊接" 英文翻译 : dip transfer welding
"短路过渡电弧焊" 英文翻译 : short circuiting arc welding; short-circuiting arc welding
"短路过渡焊接技术" 英文翻译 : ditransfer technique
"开路过渡法" 英文翻译 : open-circuit transition method
"道路过渡曲线" 英文翻译 : road transition curve
"路过" 英文翻译 : pass [go] by [through]: 我们是去芝加哥的, 只是路过这里。 we're just passing through on our way to chicago
"短路" 英文翻译 : [电学] short; short circuit; cutting-out; direct short; short out; short pass◇短路保护(装置) short-circuit protection; 短路电流 short-circuit current (scc); 短路阻抗 short-circuit impedance
"过渡" 英文翻译 : transition; transit 过渡时期 a period of transition; 从一个阶段过渡到另一个阶段 transition from one stage to another; 从秋季过渡到冬季 the transit of autumn to winter; 过渡办法 interim measures; 过渡舱 adapter module (用于航天器与运载火箭之间); 过渡措施 interim measure; 过渡 (地)带 transition belt; transition zone; intermediate zone; 过渡段 changeover portion; 过渡阶段 transition stage; 过渡结构 transition structure; 过渡区 [植物学] transition region; intermediate zone; transition area; 过渡时间 transit time; 过渡时期 transition duration; transient period; 过渡形式 transitional form; 过渡仪式 rite of passage; 过渡周期 transient period; 过渡状态 transition state
"穿过，经过，路过" 英文翻译 : pass through
"断路过程" 英文翻译 : ausrueckvorgang
"管路过滤器" 英文翻译 : in line filter
"回路过程" 英文翻译 : circuit process
"开路过滤法" 英文翻译 : open-circuit transition method
"路过医院" 英文翻译 : pass the hospital
"路过蜻蜓" 英文翻译 : go by dragonfly
"陆路过境站" 英文翻译 : road border crossing point
"旁路过程" 英文翻译 : bypass procedure
"旁路过滤器" 英文翻译 : by pass strainer; bypass filter; bypass strainer
"我们是路过" 英文翻译 : we got by
"有风路过" 英文翻译 : wind passing by
"走过路过" 英文翻译 : go past no mistake past; wojsdm

例句与用法

Research on waveform control method of short transition high - speed welding
短路过渡高速焊波控法的研究
Randomicity amp; stability of short - circuiting droplet transfer in arc welding process
弧焊短路过渡过程的随机性与稳定性
The process of short circuit transition is non - linear and with many influencing factors , and it is difficult to find an ideal model for control
短路过渡的co _ 2气体保护焊过程具有非线性和不确定性，干扰因素众多，很难得到一个理想的数学模型进行控制。
The co2 welding process needs the special external characteristic and dynamic characteristic of power source for there are alternately arcing time and short circuiting time at the period of short - circuiting co2 welding
在采用短路过渡方式的co2焊过程中,短路和燃弧过程交替发生,因此它对电源的外特性和动特性有特殊的要求。
Based on the relative theories about electric circuit and synchronous generators " post - fault transient , a practical computerized method making use of node impedance matrix is proposed to calculate the instantaneous currents of a faulty power system
本文基于电路理论和发电机的短路过渡过程理论，利用节点阻抗阵推导出电力系统短路时任意时刻短路电流的实用计算机算法。
Transitional feature of the arc and metal droplet in the welding process with steam shielded arc is investigated by means of analysing the waveforms of welding voltage and current under different welding regimes and it is found that there are two types of arc process behavor ? " arc starting - arc blowing out - short - circuiting " and " arc - starting - short - circuiting " . under the condition of constant diameter of welding wire and its feeding speed , the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply . if arc process behaves as alternative process of " arc starting - arc blowing out - short - circuiting " with minimum time duration of arc blowing out and maximum frequency of short - circuit transition , the welding process will be stable with less spatter and smooth weld bead
通过分析不同焊接规范下的焊接电压和电流的波形.研究了水蒸气保护下电弧及熔滴过渡的特点，发现其电弧过程行为有“燃弧?熄弧?短路”和“燃弧?短路”两种形式.在焊丝直径和送丝速度一定的情况下，通过调节焊接回路中的电感量和电源电压，可以改变电弧的过程行为形式.若电弧过程呈“燃弧?熄弧?短路”交替进行，并且熄弧时间最短时，短路过渡频率最高，在这种情况下，飞溅小，焊道成型好，焊接过程稳定
In this thesis , an arc sensor based on fuzzy control is designed . through the change of welding current in waving , the arc sensor judges the excursion and provides the adjusting output , meanwhile , it transmits the data acquired to a personal computer to be displayed and analyzed
本文介绍了短路过渡的co _ 2气体保护焊电弧传感器，通过对摆动过程中焊接电流的变化来判别焊缝偏移情况，采用模糊控制得到控制输出，并将数据经串口通信传送到pc机上加以显示和分析。