热磨的英文

• defibrating
• hot-grinding

• "磨"英文翻译    mill; millstones
• "热磨合" 英文翻译 :    hot breaking-in; hot running-in
• "热磨机" 英文翻译 :    defibrater; defibrator; prefiner; thermofiner
• "热磨损" 英文翻译 :    thermal wear; thermic wear
• "发热磨沙膏" 英文翻译 :    self-heating scrub
• "热磨坏浆" 英文翻译 :    tm= thermo mechanical pulp
• "热磨机械浆" 英文翻译 :    tm= thermo mechanical pulp
• "预热磨石" 英文翻译 :    stone conditionoing
• "化学热磨坏浆" 英文翻译 :    chemithermomechanical pulp
• "化学热磨机械浆" 英文翻译 :    chemithermomechanical pulp
• "热磨坏浆的缩略语" 英文翻译 :    tmthermo mechanical pulp
• "纤维分离机；热磨机" 英文翻译 :    defibrater
• "管式连续蒸煮热磨法" 英文翻译 :    defibrator process
• "化学热磨坏浆的缩写" 英文翻译 :    ctmchemithermomechanical pulp
• "热磨机械浆的缩略语" 英文翻译 :    tmthermo mechanical pulp
• "热膜式空气流量计" 英文翻译 :    hfm hot film air mass meter
• "热膜流速仪" 英文翻译 :    hot-film probe
• "热膜流速计" 英文翻译 :    hot- film anemometer; hot-film anemometer
• "热膜流速测定法" 英文翻译 :    hot-film anemonmetry
• "热膜风速仪传感器" 英文翻译 :    hot film probe

• Defibrator - production and acceptance specifications
  热磨机制造与验收技术条件
• Defibrator ? technical specifications of main shaft
  热磨机主轴技术条件
• The initial search of application of monte carlo in the defiberator
  蒙特卡罗方法在纤维热磨中应用的可行性初探
• Tmp thermo mechanical pulp
  热磨机械浆
• 7 . in order to meet the requirement of the heat milling system to the height of materials in the preheating jar , the fuzzy - pi control strategy is adopted to design the control system , and both the simulation investigation and the actual application achieve good effect
  7 、针对热磨系统对预热缸的料位的要求，采用fuzzy - pi控制策略对控制系统进行设计和仿真研究，表明了系统的可行性和有效性，实际应用也取得了良好的效果。
• The question for study is a part of subsystem of production process control system of application & demonstration project of cims of fuzhou man - made board plant under the " 863 program " . the whole system is a multi - grades distributive process control system in which the advanced process control ( apc ) technologies are applied to control the two key sectors , namely the drying sector and the heat milling sector , of the production processes of the man - made board plant
  2 、本课题为国家863计划福州人造板厂cims应用示范工程中生产过程控制分系统的一部分，整个系统为多级分布式过程控制系统，在此将先进控制技术应用于人造板生产过程中干燥系统和热磨系统这两个关键工段的控制。