热压烧结的英文

• hot pressed sintering

• "热压"英文翻译    heat pressing; hot briquetti ...
• "烧结"英文翻译    firing; fritting; cementatio ...
• "热压烧结制品" 英文翻译 :    hot-pressedandsinteredproduct
• "超高压烧结" 英文翻译 :    ultra-high pressure sintering
• "等静压烧结" 英文翻译 :    isostatic sintering
• "加压烧结" 英文翻译 :    compression sintering; pressing sintering; pressure sintering; pressuresintering; sintering under pressure
• "加压烧结法" 英文翻译 :    hot pressing
• "无压烧结" 英文翻译 :    loose sintering; pressureless sintering; pressurelesssintering
• "过渡液压烧结" 英文翻译 :    transient liquid sintering
• "冷压烧结技术" 英文翻译 :    cold-pressing-sintering technique
• "冷压烧结青钢" 英文翻译 :    cold-pressed and sintered bronze
• "冷压烧结青铜" 英文翻译 :    cold pressed and sintered bronze
• "气氛加压烧结" 英文翻译 :    gas-pressure sintering
• "热等静压烧结" 英文翻译 :    high temperature isostatic pressing
• "烧结热压结" 英文翻译 :    sintering
• "不加压烧结碳化硅" 英文翻译 :    ssic silicon carbide pressureless-sintered
• "电活化加压烧结" 英文翻译 :    electrically activated pressure-sintering
• "加热加压烧结机" 英文翻译 :    heat-pre ure agglomerator; heat-pressure agglomerator
• "气氛加压烧结法" 英文翻译 :    gas pressure sintering
• "热压" 英文翻译 :    heat pressing; hot briquetting; hot compression; hot extrusion◇热压板 heating platen; 热压成型 hot-forming; 热压处理 autoclave; 热压锻 hot-press forging; 热压光学材料 thermocompression optical material; 热压焊接 [工业] thermocompression bonding; thermal compression welding; 热压焊结 pressure-welded junction; 热压合金 hot-pressed alloy; 热压机 hot press
• "烧结" 英文翻译 :    firing; fritting; cementation; clotting; agglomeration; agglutination; [冶金学] sintering; nodulize; sinter-roasting◇烧结厂 ore-sintering plant; 烧结成型 sinter molding; 烧结锻造 sintering forging; 烧结法 sintering process; 烧结工序 sintering circuit; 烧结机 sintering machine; 烧结剂 agglutinant; 烧结料 sintering feed; 烧结裂纹 sintering crack; 烧结炉 fritting furnace; welding furnace; 烧结设备 agglomerating plant; 烧结铸石 sintering glass-ceramics; 烧结砖 baked brick
• "低压烧嘴" 英文翻译 :    low pressure burner
• "高压烧嘴" 英文翻译 :    high pressure burner
• "耐压烧瓶" 英文翻译 :    pre ure flask; pressure flask
• "热压机,热压" 英文翻译 :    hot press

• Hot - pressing sintering of w - 15cu alloy
  热压烧结制备高密度钨铜合金
• The physical properties and high temperature oxidation resistance of the ti3sic2 samples were studied
  研究了热压烧结ti _ 3sic _ 2的物理性能和高温抗氧化性能。
• Analyzing the influence factors for the performance of diamond drill bit in hot pressure sintering process of intermediate - frequency furnace
  浅析中频热压烧结过程中影响金刚石钻头性能的因素
• The la1 - xsrxmno3 powder has been sintered by constant pressure sintering , heat pressure sintering ( hp ) and spark plasma sintering ( sps )
  通过无压烧结，热压烧结和sps烧结工艺对lal . xsrxmno3粉末进行烧结，其中sps烧结在900 ，保温1omin得到的烧结样品致密化程度最好。
• This thesis reports some results on the hot press sintering of nano - composite wc - co powder , which is prepared by spray pyrogenation & continuous deoxidization and carbonization process
  本课题采用热压烧结技术对以喷雾热解?连续还原碳化法制备的纳米复合wc - co粉末进行了热压烧结研究。
• Considering the growing of nano - sized powder during sintering and to improve the physical performance , some sintering research about the addition of inhibitor vc has been done
  针对纳米粉末在烧结中容易长大的特点，也为了改善材料的物理性能，对添加抑晶剂vc的原料粉末的热压烧结进行了一些研究。
• The sintering time also affects the specimens " properties . nano - composite wc - co powder can be hot press sintered to cermet whose hra is 94 . 6 and trs is 1183 mpa under 1350 for 2 hours
  最终烧结实验表明纳米复合wc - co粉末1350保温2小时条件下的热压烧结可以获得抗弯强度为1183mpa ，洛氏硬度为94 . 6的硬质合金。
• Differential thermal analysis ( dta ) of starting powers and x - ray diffraction ( xrd ) of samples sintered at different temperatures from 600 c to 1300 c by hot pressing were utilized to analyse the phase composition
  采用原位热压烧结工艺，通过差热分析和x衍射图谱，分析了600 1300不同烧结温度下烧结所得产物的相组成。
• Using aluminium sulfate and colloidal silica as raw materials , another kind of mullite precursor powders is made . the relative density of silica - rich mullite ceramic sintered from these powders at 1550 for 1 hour with a pressure of 15mpa is 97 %
  以硫酸铝、硅溶胶为原料，采用溶胶-凝胶法制备了莫来石先驱体粉末，所得富硅莫来石先驱体粉末在1550 、 15mpa下热压烧结1小时后，致密度达97 。
• In this article , by rf sputtering the licoo _ 2 film was produced . by hot pressing and cold pressing ( and sintering ) , the licoo _ 2 targets used in the rf sputtering were produced differently . both technics of the preparation of the licoo _ 2 film and the licoo _ 2 target were studied
  本文使用热压烧结方法和冷压后烧结方法制备了磁控溅射用的licoo _ 2靶材,并使用磁控溅射方法制备了licoo _ 2薄膜,对两者的制备工艺进行了研究。