烧蚀机理的英文

• ablation mechanism
• ablative mechanism

• "烧蚀"英文翻译    ablation; erosion
• "机理"英文翻译    mechanisation; mechanization ...
• "腐蚀机理" 英文翻译 :    corrosion mechanism; mechanism of corrosion
• "电火花烧蚀机" 英文翻译 :    spark eroding machine
• "表面腐蚀机理" 英文翻译 :    mechanism of surface corrosion
• "应力腐蚀机理" 英文翻译 :    mechanism of stress corrosion
• "烧蚀" 英文翻译 :    [航空]ablation;erosion
• "腐蚀机" 英文翻译 :    eriodiermaschine wire edm
• "磨蚀机" 英文翻译 :    abrader
• "机理" 英文翻译 :    mechanisation; mechanization; mechanism 分娩机理 [医学] mechanism of labor; 腐蚀机理 corrosion mechanism; 结晶机理 crystallization mechanism
• "电腐蚀机" 英文翻译 :    edm; electric discharge machine; electro erosion machine; electro-erosion machine; machine
• "康贴磨蚀机" 英文翻译 :    conti abrader
• "喷雾腐蚀机" 英文翻译 :    spray etcher
• "无粉腐蚀机" 英文翻译 :    powderless etching machine
• "冲蚀，烧蚀" 英文翻译 :    ablation
• "防烧蚀" 英文翻译 :    burn-out proof
• "管烧蚀" 英文翻译 :    barrel ablation
• "热烧蚀" 英文翻译 :    thermal ablation
• "烧蚀；消融" 英文翻译 :    ablation
• "烧蚀表" 英文翻译 :    ablation meter
• "烧蚀层" 英文翻译 :    ablatant; ablating cover; ablating layer; ablating shell; ablation layer; ablative coating
• "烧蚀处" 英文翻译 :    burnt place
• "烧蚀的" 英文翻译 :    ablating; ablative
• "烧蚀剂" 英文翻译 :    ablativeagent; ablator
• "烧蚀量" 英文翻译 :    ignition loss

• It is important to establish ablation model and predict ablation rate of thermal insulation in oxygen - riched condition . this paper investigated ablation mechanism from experimental and theoretical aspects
  本文从实验和理论两方面对绝热层在富氧环境下的烧蚀机理进行了研究。
• The calculation results were consistent with test data . this indicated that the mechanism analysis was practical , physical model and mathematical model were reasonable
  计算结果与试验数据进行比较，结果较为一致，说明本文烧蚀机理分析是符合实际情况的，建立的物理、数学模型是合理、可行的。
• By observing the macrocosmic and microcosmic state of the test specimens , the ablation pattern of inhibitor was put forward and ablation mechanism was analyzed . the critical average particle diameter that influenced inhibitor ablation was obtained . the time - dependent ablation expression associated particle concentration and angle was achieved through analyzing their variation alone with the change of specimen figure
  ( 4 )通过对试验后绝热材料试件的表观和微观状态分析，提出了过载条件下绝热层的烧蚀模式，并分析了其烧蚀机理，获得了试验条件下影响绝热层烧蚀的平均颗粒直径。