烧结镍的英文

• sintered nickel

• "烧结"英文翻译    firing; fritting; cementatio ...
• "镍"英文翻译    nickel
• "烧结镍制品" 英文翻译 :    sintered nickel product
• "烧结镍过滤杯" 英文翻译 :    sintered nickel cup
• "烧结镍过滤元件" 英文翻译 :    sintered nickel filter
• "烧结" 英文翻译 :    firing; fritting; cementation; clotting; agglomeration; agglutination; [冶金学] sintering; nodulize; sinter-roasting◇烧结厂 ore-sintering plant; 烧结成型 sinter molding; 烧结锻造 sintering forging; 烧结法 sintering process; 烧结工序 sintering circuit; 烧结机 sintering machine; 烧结剂 agglutinant; 烧结料 sintering feed; 烧结裂纹 sintering crack; 烧结炉 fritting furnace; welding furnace; 烧结设备 agglomerating plant; 烧结铸石 sintering glass-ceramics; 烧结砖 baked brick
• "共烧；烧结" 英文翻译 :    cofiring
• "过烧结" 英文翻译 :    oversintering
• "碱烧结" 英文翻译 :    alkaline sintering
• "结块，烧结" 英文翻译 :    cake
• "铝烧结" 英文翻译 :    aluminum sinter
• "欠烧结" 英文翻译 :    undersintering
• "热烧结" 英文翻译 :    hot sinter; thermal sintering
• "烧结(铸砂)" 英文翻译 :    burning
• "烧结；结块" 英文翻译 :    sintering
• "烧结板" 英文翻译 :    sintered plate
• "烧结棒" 英文翻译 :    sintered bar
• "烧结杯" 英文翻译 :    pot grate furnace
• "烧结饼" 英文翻译 :    agglomerated cake; sinter cake
• "烧结铂" 英文翻译 :    sintered platinum
• "烧结层" 英文翻译 :    sinter layer; sintered layer; sintering bed
• "烧结厂" 英文翻译 :    clinker plant; ore sintering plant; sintering plant
• "烧结带" 英文翻译 :    friting zone; sintering belt; sintering strand; sintering zone
• "烧结的" 英文翻译 :    agglomerant; agglomerate; burnt; caking; clinkery; fritted; sintered
• "烧结点" 英文翻译 :    sintering point

• Sintered nickel filter
  烧结镍过滤元件
• ( 4 ) some required - shape metal parts with certain mechanical strength are sintered successfully with powerful laser
  ( 4 )采用大功率激光直接烧结镍基高温合金粉末,成形具有一定形状和强度的金属块体或零件。
• ( 3 ) there are many flaws in direct laser metal sintering , such as the high remnants stress , micro - hole and micro - crack in sintering parts . in order to solving those problems , the programming of scanning paths is put forward , and several parts are prepared with different scanning paths respectively . the following conclusion is educed : the parts produced with short - side scanning path and same scanning direction have the minimum structure , the rigidity of parts prepared by short - side and same direction scanning path is highest , and the density of parts produced with the vertical scanning path is maximal
  ( 3 )针对采用大功率激光直接烧结镍基高温合金成形金属零件存在的问题,如较大的残余应力,制件中存在着微裂纹、微孔洞等缺陷,初步提出扫描路径的规划,并采用几种不同的扫描方式进行烧结试验,发现采用短边扫描路径和同向扫描能够获得更加细小和分布均匀的组织结构,采用短边同向路径制备的试样其显微硬度最高,而采用变向扫描(垂直)路径制备的试样致密性最好。