烧结机理的英文

• mechanism of cementing
• sintering mechanism

• "烧结"英文翻译    firing; fritting; cementatio ...
• "机理"英文翻译    mechanisation; mechanization ...
• "液相烧结机理" 英文翻译 :    liquid phase sintering mechanism
• "烧结机" 英文翻译 :    agglomerating machine; agglomerating plant; induration machine; sinter machine; sinter mixer; sinterer; sintering machine; ting plant
• "宝石烧结机" 英文翻译 :    jewel sintering machine
• "抽风烧结机" 英文翻译 :    downdraught sintering machine
• "大型烧结机" 英文翻译 :    large-type sinterer
• "带式烧结机" 英文翻译 :    agglomeration strand; belt-type sinterer; continuous grate; continuous pallet type sintering machine; continuous pallettype sintering machine; continuous sintering strand; continuous strand sinter machine; firing grate; sinter chain; sinter strand; sintering belt; straight line sintering machine; straight-line sintering machine
• "鼓风烧结机" 英文翻译 :    up draught sintering machine; updraft sintering machine
• "辊道烧结机" 英文翻译 :    roller-type sinterer
• "环式烧结机" 英文翻译 :    circular-traveling grate machine; circular-travelling grate machine
• "火花烧结机" 英文翻译 :    spark sintering machine
• "矿石烧结机" 英文翻译 :    ore sintering machine; ore-sintering machine; sintering machine
• "链式烧结机" 英文翻译 :    sinter chain
• "盘式烧结机" 英文翻译 :    greenawalt type sintering machine
• "忍烧结机" 英文翻译 :    sintering machine
• "烧结机传动" 英文翻译 :    sinter machine drive
• "烧结机导轨" 英文翻译 :    sintering rail
• "烧结机返矿" 英文翻译 :    sinter machine return fines
• "烧结机机尾" 英文翻译 :    machine discharge
• "烧结机面积" 英文翻译 :    sinter strand area
• "烧结机散料" 英文翻译 :    machine dripping
• "烧结机台车" 英文翻译 :    sintering pallet
• "吸风烧结机" 英文翻译 :    down draft sintering machine; downdraft sintering machine
• "圆盘烧结机" 英文翻译 :    round sintering machine

• Research on mechanism of sintered in - siti reacted sinter ing of ztm composites
  莫来石一氧化锆复相陶瓷材料原位反应烧结机理的研究
• To utility the low temperature sintering industry , some discoveries must be found in the mechanism of low temperature sintering . otherwise , the study of technology will be faced with bottleneck
  要想将低温烧结工业实用化,就必须在低温烧结机理上有所发现,否则工艺的研究将面临瓶颈。
• Firstly the interactional principle of laser and material , the physical and chemical properties of the thermoplastic plastic is studied in theory , and the laser sintering mechanism of powder is also studied
  首先从理论上分析了激光与材料相互作用原理和热塑性塑料的物理、化学性质，并且研究了粉末激光烧结机理。
• ( 4 ) based on the mechanism of sls ( selected laser sintering ) , a matching rule between scanning velocity and laser power is established so as to realize the laser power matching in different scanning velocities
  ( 4 )从激光选择性烧结机理出发，建立了激光扫描功率与扫描速度之间的匹配规则，以实现在不同扫描速度下激光功率的自动匹配。
• By the xrd phase analysis of the pre - sintered and sintered composites and the sem image of fracture microstructures of the composites , the sintering process and the sintering mechanism of the composites are investigated in detail
  通过烧结前后复合材料的粉末x射线物相分析及复合材料断面微结构的观察，详细研究了复合材料的烧结过程和烧结机理。
• But there is a few findings in the study of low temperature sintering , which cries for more efforts putting into the mechanical study of low temperature , to find a method for technology promoting and enrich the known activation sintering theory
  然而国内外在低温烧结机理方面的成果乏善可陈,这就迫切需要加大对低温烧结机理研究的力度,为工艺提升找到一条路,并且丰富已知的活化烧结理论。
• The micromorpholgy and grain boundary microstructure of the material were studied with sem and tem and the grain boundary phase composition were analyzed with eds and x - ray the mechanical properties , micromorpholgy microstructure of grain boundary and phase composition of al2o3 composite ceramics were systematically studied , the effect of additives , the relationship between microstructure and mechanical strength , the sintering mechanism of the material and influence factors of the structure and properties of al2o3 composite ceramics were discussed respectively
  系统研究了氧化铝陶瓷的力学性能、微观形貌、晶界显微结构，并讨论了各添加组分的作用、材料显微结构与力学性能的关系以及材料的烧结机理和影响材料结构与性能的影响因素。本论文探讨了氧化铝基复相陶瓷的强韧化机理，实验表明al _ 2o _ 3 - ticn体系主要是微裂纹韧化。
• Sic whisker is incorporated in the raw material of reaction bonded silicon carbide ( rbsc ) to prepare sicw / sic composites . the effect of fabrication process on the microstructure and the properties of the sintered body are investigated in this paper . based on the research results on the sinter process , it is concluded that the sic whisker solve rapidly even at 1450
  本课题将sicw引入反应烧结碳化硅( rbsc )体系，提出了一种制备高sicw含量sicw / sic复合材料的思路，研究了材料制备工艺对sicw / sic复合材料显微结构的影响，讨论了sicw / c坯体的反应烧结机理，对材料显微结构与力学性能的相关性作了研究。
• In this paper , the alumina ceramic was prepared under normal pressure and low temperature , the mechanical properties , micromorphology , microstructure of grain boundary and phase composition of the alumina ceramic , and the precision shaping and cold processing of the femoral head were systematically studied ; the effects of the additives , the relation between microstructure and mechanical strength , the sintering mechanism of the material and the influence factors of the structure and properties of the alumina ceramic were discussed also
  本文在常压低温条件下制备了氧化铝陶瓷，系统研究了氧化铝陶瓷材料的力学性能、微观形貌、晶界显微结构、相组成和股骨头的精密成型、冷加工，并讨论了添加剂的作用、材料显微结构与力学强度的关系、材料的烧结机理及影响氧化铝材料结构与性能的因素。