法镀膜的英文

• cvd

• "法"英文翻译    law
• "镀"英文翻译    plate
• "膜"英文翻译    membrane
• "镀膜" 英文翻译 :    blooming; film, coated
• "干燥法镀锌" 英文翻译 :    dry galvanizing
• "滚镀法镀法" 英文翻译 :    cadmium plating by barrel method
• "滚筒法镀" 英文翻译 :    barrel plating
• "火法镀金" 英文翻译 :    fire gilding
• "湿法镀锌" 英文翻译 :    wet galvanizing
• "置换法镀层" 英文翻译 :    replacement coating
• "镀膜的" 英文翻译 :    cated
• "镀膜机" 英文翻译 :    coater; film coating machine; film plating machine; film-plating machine
• "镀膜计" 英文翻译 :    film plating machine
• "防镀膜" 英文翻译 :    stooff
• "银镀膜" 英文翻译 :    silver coating
• "滚镀法镀镉装置" 英文翻译 :    barrel equipment for cadmium plating
• "化学还原法镀镍" 英文翻译 :    nickel plating by chemical reduction
• "表面镀膜镜" 英文翻译 :    first surface mirror
• "超级镀膜" 英文翻译 :    high-grade coaing; high-grade coating
• "导电镀膜" 英文翻译 :    conducting coating
• "低辐射镀膜" 英文翻译 :    low emissivity coatings
• "电镀膜机" 英文翻译 :    electroplating film machine
• "电镀膜铝窗" 英文翻译 :    anodized aluminium window
• "电离镀膜" 英文翻译 :    ion plating film
• "镀膜玻璃" 英文翻译 :    coated glass

• The thickness of the film increases with the growth of voltage when deposited for certain time and increases with the enhancement of deposition time when deposited at certain voltage
  膜厚随沉积电压和沉积时间的增加而增加，但增加速率下降。同时研究了提拉法镀膜中工艺参数对制备氧化铝膜的影响。
• In this paper , the property difference of sio2 sols used for preparing thin films by esam method or sol - gel process has been discussed . three kinds of sio2 sols were prepared , catalyzed by hcl or nh3 h2o only , or hcl first and then nh3 h2o respectively ( please note : in following text , the sio2 sol catalyzed by hc1 first and then nh3 h2o and its correspondent films will be named sio2 sol 1 # and film 1 ; the sio2 sol catalyzed by nh3 h2o only and its correspondent films will be named sio2 sol 2 # and film 2 # ) . through investigating the assembling properties of the sols , observing thin films " microscopic structure with tem and testing their transmissivity with 721 spectrophotometer , we find that the first kind of sol is not suitable for preparing esam films , but the last two , i . e . sol 1 # and sol 2 # , are good
  本文讨论了esam法制备薄膜所用的溶胶与sol - gel法所用的溶胶在性能上的区别，在hc1或nh _ ? h _ 2o分别单独催化和hc1 nh _ 3 ? h _ 2o分步催化三种催化条件下制备了sio _ 2溶胶(以下规定hc1 nh _ 3 ? h _ 2o分步催化的sio _ 2溶胶为1 ~ #溶胶，相应的薄膜为1 ~ #薄膜， nh _ 3 ? h _ 2o催化的sio _ 2溶胶为2 ~ #溶胶、相应的薄膜为2 ~ #薄膜) ，在通过组装薄膜并用透射电镜( tem )观察薄膜微观结构以及用721分光光度计测试样品的光透射率，得出了后两种催化方法所制备的溶胶适合于esam法镀膜，而第一种溶胶不适于用此法镀膜的结论，用傅立叶红外光谱( ft - ir )研究了溶胶组成；用差热失重分析仪( dta - tg )对胶体进行了热分析。