水阀门的英文

• penstock
• sluicevalve

• "门"英文翻译    entrance; exit; door; gate
• "灌水阀门" 英文翻译 :    filling valve
• "节水阀门" 英文翻译 :    water-saving valve
• "排水阀门" 英文翻译 :    emptying valve
• "船闸充水阀门" 英文翻译 :    culvert valve
• "进水阀；进口阀门" 英文翻译 :    inlet ale; inlet valve
• "风动汽缸排水阀阀门" 英文翻译 :    pneumatic cylinder cock valve
• "水阀" 英文翻译 :    hydrovalve; release valve; sluicevalve; valves-water; valve， ice; washout valve; water valve
• "大中型水轮机进水阀门基本技术条件" 英文翻译 :    fundamental technical requirements for large and medium inlet valves of hydraulic turbine
• "阀门" 英文翻译 :    [机械工程] valve; tap
• "泄水阀 ，溢水阀" 英文翻译 :    sluice valve
• "充水阀" 英文翻译 :    filling valve
• "冲水阀" 英文翻译 :    flushing valve; flushometer
• "出水阀" 英文翻译 :    discharge valve; outlet valve
• "除水阀" 英文翻译 :    vapor trap
• "滴水阀" 英文翻译 :    dew valve; drivalve; dry sprinkler system
• "断水阀" 英文翻译 :    water shut off valve
• "泛水阀" 英文翻译 :    flooding valve
• "放水阀" 英文翻译 :    discharge water valve; purge valve; water drain valve
• "废水阀" 英文翻译 :    valve， waste
• "分水阀" 英文翻译 :    shunt valve
• "封水阀" 英文翻译 :    seal water valve
• "给水阀" 英文翻译 :    feed valve; feed water valve; feedwater valve
• "供水阀" 英文翻译 :    feed valve
• "海水阀" 英文翻译 :    sea cock; sea valve; seavalve

• Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
  大中型水轮机电水阀门基技术条件
• Specification for automatic electrical controls for household and similar use - particular requirements - particular requirements for electrically operated water valves , including mechanical requirements
  家用和类似用途的自动电控制器规范.特殊要求.电操作水阀门的特殊要求,包括机械要求
• The goal is to control the water outlet temperature by manipulating the flow rate of the steam and control the water inlet rate by manipulating the height of the water level in the water tank
  本文中，换热器的控制任务主要有两个，首先通过控制水箱进口水阀门开度，进而控制水箱水位，进而控制换热器进口水流量。
• According to the design code for filling and emptying system of shiplocks and the layout characteristics of the second line of qililong sea route on fuchun river and the upstream navigation tunnel , the type of the filling and emptying system of shiplocks is determined , the area of the culvert transect at the valve is calculated , and the layout type and key size of the filling and emptying system are recommended
  摘要根据富春江七里泷航道第二通道工程船闸及其上游通航隧道总体布置的特点，按照《船闸输水系统设计规范》的要求，确定了船闸的输水系统型式，并计算了输水阀门处廊道断面的面积；推荐了通航船闸输水系统的布置及关键尺寸。