氮化处理的英文

• nitriding
• nitrogen treatment

• "氮化"英文翻译    nitrating; nitration; nitrid ...
• "处理"英文翻译    deal or cope with
• "软氮化处理" 英文翻译 :    tufftride process; under annealing
• "虚氮化处理" 英文翻译 :    blank nitriding
• "重氮化处理" 英文翻译 :    diazotization process
• "离子氮化处理设备" 英文翻译 :    ionitriding treatment equipment; ionitridingtreatmentequipment
• "气体软氮化处理" 英文翻译 :    nitemper
• "不锈钢表面氮化处理" 英文翻译 :    malcolmize/marcomizing; marcomizing
• "气体软氮化处理 气体渗氮处理" 英文翻译 :    nitemper
• "安定化处理" 英文翻译 :    stabilizing treatment; straightening annealing
• "白化处理" 英文翻译 :    whitening process
• "不熔化处理" 英文翻译 :    oxidation treatment oxidizing treatment
• "臭氧化处理" 英文翻译 :    ozonation treatment
• "春化处理" 英文翻译 :    iarovization; jarovization; vernalisation; vernalization; vernalize
• "脆化处理" 英文翻译 :    embrittlement operation; embrittlement treatment
• "电化处理" 英文翻译 :    electrochemical treatment
• "电磷化处理" 英文翻译 :    electro granodising; electrogranodising
• "冬化处理" 英文翻译 :    winterization
• "钝化处理" 英文翻译 :    passivation
• "氟化处理" 英文翻译 :    fluoridation
• "腐化处理" 英文翻译 :    septicization
• "钢化处理" 英文翻译 :    toughening treatment
• "固化处理" 英文翻译 :    curing process
• "固熔化处理" 英文翻译 :    solution anneling
• "固溶化处理" 英文翻译 :    solid solution treatment; solution treatment

• Investigation of wear behavior on nitriding sinter metal materials
  氮化处理粉末烧结材料耐磨性研究
• Hardness depth of heat - treated parts ; determination of the effective depth of hardening after nitriding
  热处理件的硬化深度.氮化处理后硬化有效深度的测定
• Screw bat of feed hopper abopted with alloysteel , special handing on surface , durabie in heat , wear and corrosion
  螺杆料筒采用优质合金钢，表面氮化处理，耐热、耐磨、耐腐蚀。
• The nitriding is an important heat treatment process to boring axis in cnc floor - type milling / boring machine
  摘要氮化处理是数控落地铣镗床上重要部件镗轴的常用最终热处理工艺。
• A tentative discussion about the mechanism of the effect of both nitrogenation and oxidation was given in the present work
  本文给出了有关氮化处理和氧化处理对性能的影响机制的初步理论分析。
• Pole , inside the set adoption was turned by nitrogen to handle a steel material , having to bear to whet and bear causticity more and so much
  螺杆内套采用经氮化处理钢材,具有较好的耐磨和耐腐蚀性。
• The storage type hollow molding machine offers a high level of durability with its body and mechanism subject to 28crmoaia steel nitriding treatment
  本款储料式中空成型机机同机心采用38crmoaia钢氮化处理，经久耐用再加上名牌电器气压液压件等组合而成本款精品。
• Abstract : through analysis of properties of the moulds used in aluminium alloy forging products after nitriding process , the significance of moulds nitriding process in massive , medium or small type and high - precision aluminium alloy die forging products is discussed
  文摘:通过对生产铝合金模锻件所需模具经过氮化处理后的性能分析，阐述了模具氮化处理在大批量、中小型、高精度铝合金模锻件生产中的重要性。
• Current researches , applications , preparation and structure of si3n4 are summarized in this paper . a new conclusion is drawn that silicon wafer can react with nitrogen at the temperature higher than 1100 and in super - pure nitrogen by direct - nitridation of silicon at the temperature from 800 to 1200 . the prepared silicon nitride samples are tested by xps ( x - ray photoelectron spectroscopy ) , sem ( scanning electron microscopy ) , optical microscopy , xrd ( x - ray diffraction ) and edx ( energy dispersive x - ray analysis )
  通过硅片在800到1200各个温度和各种氮气气氛下的氮化处理的实验结果，报道了不同与其他研究者的氮化条件，硅片在氮气保护的热处理中的氮化条件为：高于1100的温度和高纯氮的气氛条件，同时对该氮化硅薄膜进行了金相显微镜、扫描电镜( sem ) 、 x射线衍射仪( xrd ) 、 x射线光电子谱( xps ) 、 x射线能谱仪( edx )和抗氧化性等测试和分析。

• 氮化处理的日语：ちっかしょり