标定误差的英文

• calibrated error
• calibration error

• "标定"英文翻译    demarcate; calibration; cali ...
• "误差"英文翻译    error
• "测定误差,可定误差" 英文翻译 :    determinate error
• "不定误差" 英文翻译 :    indeterminate error; variable error
• "不可定误差" 英文翻译 :    indeterminate error
• "测定误差" 英文翻译 :    error at measurment; evaluated error; measurement error
• "常定误差" 英文翻译 :    constant error
• "滴定误差" 英文翻译 :    titration error; volumetric error
• "调定误差" 英文翻译 :    set up error; set-up error
• "断定误差" 英文翻译 :    ascertainment error
• "固定误差" 英文翻译 :    built-in error; constant error; fixed error; fixederror; permanent errors; solid error
• "恒定误差" 英文翻译 :    co tant error; constant error
• "假定误差" 英文翻译 :    assumption error
• "检定误差" 英文翻译 :    standardization error
• "可定误差" 英文翻译 :    determinate error
• "评定误差" 英文翻译 :    evaluated error; rating error
• "确定误差" 英文翻译 :    definite error
• "设定误差" 英文翻译 :    specification error
• "未定误差" 英文翻译 :    indeterminate error
• "稳定误差" 英文翻译 :    stabilized error
• "选定误差线" 英文翻译 :    selected error bars
• "预定误差" 英文翻译 :    predictive error; presumptive error
• "装定误差" 英文翻译 :    setting error
• "评定误差 估计误差 测定误差" 英文翻译 :    evaluatederror
• "彩色测定误差" 英文翻译 :    color-index error

• Lastly , the calibration error and measurement data had been analysed
  最后对标定误差和实验测量结果进行了分析。
• Finally , the calibration error was made certain in 11 - 17 % through data analysis
  最后对标定和测量结果进行了分析，得出标定误差为11 7 。
• In image - based , also called feature - based systems , the error signal is defined in terms of image features and is directly measured in the image coordinate system . therefore , computational costs are significantly reduced and the system becomes less sensitive to abstract errors in camera calibration and system modeling
  误差信号按照图像特征来定义而且直接在图像坐标空间来测量，因此可以大大降低计算量，而且系统对相机标定误差和系统建模误差不敏感。
• We validated this system on the black - body oven , analyzed the errors which brought about by the optical system , ccd , surroundings and workers , expounded the improvement methods ; 5 . we had done many real measurements with this system . after analyzing the experiment results , we improved the original system and proposed a new system
  在自己研制的黑体炉上对系统进行了标定实验研究，对标定误差进行了分析，对消除光学系统、 ccd 、环境以及主观因素等对误差的影响提出了改进和处理方法，大量实验得出了较为稳定的标定测量值，为系统进行实际工况环境下的测量奠定了基础； 5