杆导的英文

• rod guidance; rod guide; spindle guide
  ◇杆导承 guide of rod; 杆导架 rod carrier

• "杆"英文翻译    shaft; rod; bar
• "导"英文翻译    lead; guide
• "杆导承" 英文翻译 :    rod guide
• "杆导架" 英文翻译 :    rod carrier
• "鼻杆导流片" 英文翻译 :    nose boom strake
• "操纵杆导管" 英文翻译 :    control rod guide tube
• "操纵杆导套" 英文翻译 :    control lever guide collar
• "顶杆导轨" 英文翻译 :    lifter guide
• "阀杆导程" 英文翻译 :    valve spindle guide
• "阀杆导承" 英文翻译 :    valve guide; valve rod guide; valve spindle guide; valve stem guide; valve-stem guide
• "阀杆导路" 英文翻译 :    valve rod guide
• "阀杆导向" 英文翻译 :    stem guiding; stem．guided
• "阀门杆导路" 英文翻译 :    guide for the valve rod
• "阀挺杆导承" 英文翻译 :    valve lifter guide; valve tappet guide
• "活塞杆导承" 英文翻译 :    piston guide; piston rod guide
• "活塞杆导件" 英文翻译 :    steguide; stepguide
• "拉杆导板" 英文翻译 :    draw bar guidance; draw bar guide; draw-bar guidance; draw-bar guide
• "拉杆导套" 英文翻译 :    draw bar guide sleeve; draw-bar guide sleeve; pull rod guide collar
• "膨胀杆导承" 英文翻译 :    expansion link guide
• "气阀杆导承" 英文翻译 :    air valve guide
• "气门杆导管" 英文翻译 :    valve stem guide
• "手柄杆导管" 英文翻译 :    handle bar guide tube
• "挺杆导承" 英文翻译 :    tappet guide
• "挺杆导管" 英文翻译 :    lifter guide; ta et guide pipe; tappet guide pipe; tappet rod guide
• "推杆导承" 英文翻译 :    push rod guide

• Control lever guide collar
  操纵杆导套
• Valve tappet guide
  阀挺杆导承
• Valve spindle guide
  阀杆导承
• Valve stem guide
  阀杆导承
• Valve - stem guide
  阀杆导承
• Valve rod guide
  阀杆导承
• A . steel parts series : guide post bushing , guide pillar , nutted rod , return rod , assistant to guide pillar , chain , etc
  A钢配件系列：导套导柱拉杆回程杆导柱辅助器边锁等。
• The corrosion resistant plate penstock is in the frame of obvious - stem , which mainly consists of lifting device , frame , gate plate , seal , wedge block compressing set , rod and rod joint , rod guide tube , install accessory and etc
  不锈钢闸门为明杆式结构，主要由启闭装置、闸框、闸板、密封件、楔块压紧装置、门杆和杆接头、杆导架、安装附件等组成。
• Transformed the six - bar guide - bar mechanism realizing linear displacement in automatic instruments into a basic rotating guide - bar mechanism , established the mathematical model of velocity approaching constant by the classical approximate synthesis theory and the modern error theory , discussedthe influences of the existent region of main mechanismic parameters on kinematic and dynamic properties , analysed the theoretical transmission ratio error , advances systematic , complete steps and methods for dimensional synthesis of this mechanism with computer aided design
  将自动化仪表中实现线性输出的六杆导杆机构转化为基础转动导杆机构，应用经典的机构近似综合理论与现代的误差理论，建立了速度逼近常数的数学模型，讨论了主要机构参数存在区域及对运动、动力性能的影响，分析了传动比理论误差，提出了系统完整的计算机辅助尺度综合的步骤与方法。