放电间隙的英文

• discharge gap
• discharging gap
• lightning gap

• "放电"英文翻译    discharge; electro-discharge ...
• "间隙"英文翻译    interval; gap; freedom; spac ...
• "辅助放电间隙" 英文翻译 :    auxiliary gap
• "消弧角保护放电间隙" 英文翻译 :    arcing horn; protective horn
• "招弧角,消弧角保护放电间隙" 英文翻译 :    arcing horn
• "等电间隙" 英文翻译 :    isoelectric interval
• "分电器触电间隙" 英文翻译 :    distributor point gap
• "保护性间隙放电" 英文翻译 :    protective gap
• "火花间隙, 放电[闪击]距离" 英文翻译 :    striking distance
• "充电间" 英文翻译 :    charging room
• "发电间" 英文翻译 :    power house
• "配电间" 英文翻译 :    distribution cabinet; switchboard room
• "固定间隙火花放电调制器" 英文翻译 :    fixed spark-gamodulator
• "排出装置放电器火花间隙" 英文翻译 :    discharger
• "电机舱,发电间" 英文翻译 :    dynamo room; dynamoroom
• "电间密度" 英文翻译 :    intermediate density
• "应急配电间" 英文翻译 :    emergency switch room
• "放电" 英文翻译 :    [物理学] (electric) discharge; electro-discharge; discharging 尖端放电 point discharge; 火花放电 spark discharge
• "间隙" 英文翻译 :    (空隙) interval; gap; freedom; space; [机械工程] clearance; separation; stricture; clear; interspace; allowance; play; backlash; bottom clearance; cross gap; free distance; gapping place; spatium; yawn; [物理学] interstice 齿轮间隙 gear clearance; 利用工作间隙学习 study in the intervals of one's work; 两场战争的间隙 an interval between two wars; 在行与行之间要留出间隙, 以便作必要的修改。 please leave a space between the lines for the necessary corrections
• "配电间电容柜" 英文翻译 :    capacitor box in switch room
• "配电间计量柜" 英文翻译 :    metering box in switch room
• "st段的等电间期" 英文翻译 :    isoelectrical interval of st segment
• "配电间低压分配柜" 英文翻译 :    low voltage switch box in switch room
• "放电灯；放电管" 英文翻译 :    discharge lamp
• "penning放电" 英文翻译 :    penning discharge

• Study on volt - ampere properties in wedm
  电火花线切割加工中放电间隙伏安特性的研究
• Emtric exhibits good oxidation stability even under the conditions of elevated temperatures at the spark gap and exposure to air found in emtric process
  Emtric具有极佳的抗氧化性，使得它在放电间隙的高温与曝气环境下，仍能保持稳定。
• Considering that the zno surge arresters have canceled gaps , they will deteriorate gradually under operating voltage . some of them will be moistened because of structure problems
  然而氧化锌避雷器没有放电间隙，在长期的运行电压作用下，其阀片会逐渐劣化；或由于避雷器本身结构不良而受潮。
• Nowadays , the switches which are being studied or applied , such as gas spark gap , thyratron and ignitron , etc , are of different structures , operating principles , advantages and disadvantages , and are applied in various situations and fields
  目前处于试验中或者投入实际应用的开关元件很多,如火花放电间隙、闸流管、引燃管等,它们有不同的结构、原理和优缺点,应用在不同的场合和领域。
• According to the state of discharge gap , combining database technology , we adopt neuro - fuzzy control technology to realize real - time control of edm process and auto - adjustment on the basis of process state , which ensure the process is in the state of optimization
  依据放电间隙状况，通过采用神经模糊控制智能技术，并结合数据库技术，对电火花成型加工过程进行实时控制，根据加工状态自动进行调节，保证了加工过程处于优化状态。
• The change of atmospheric pressure reflect the change of the altitude and the change of the temperature 、 humidity and relative air density in the different altitude region , so the atmospheric pressure is able to be use for the characteristic parameter of token the effect of the altitude on external
  气压可作为表征海拔高度对外绝缘放电电压影响的特征参数；高海拔地区空气间隙和绝缘子串的放电电压u均可表示为相应海拔下气压的幂函数，即u = u0 ( p / p0 ) n ，其中气压对放电电压影响的特征指数n与电压类型和放电间隙的结构类型以及绝缘子类型等有关。
• By using a counter and an operation microprocessor , this paper analyses the measuring method and designs an instrument of edm sinking process in discharge state . this instrument takes samples of voltage , current signal and strong and weak of high frequency signals of detecting voltage amplitude , translates them into various time pulses in discharging state . and a counting unit turns these pulses into digital signals , then send them to a microprocessor . finally various discharge time percentages are sent to the control tache
  通过采样电火花加工放电间隙的电压、电流信号和检测电压幅值上的高频信号的强弱，得出反映间隙放电状态的各种时间脉冲，利用计数器分别对其计数，再送给单片机运算处理，输出控制环节所需的各种放电状态时间百分数。
• Abstract : by using a counter and an operation microprocessor , this paper analyses the measuring method and designs an instrument of edm sinking process in discharge state . this instrument takes samples of voltage , current signal and strong and weak of high frequency signals of detecting voltage amplitude , translates them into various time pulses in discharging state . and a counting unit turns these pulses into digital signals , then send them to a microprocessor . finally various discharge time percentages are sent to the control tache
  文摘:通过采样电火花加工放电间隙的电压、电流信号和检测电压幅值上的高频信号的强弱，得出反映间隙放电状态的各种时间脉冲，利用计数器分别对其计数，再送给单片机运算处理，输出控制环节所需的各种放电状态时间百分数。

• 放电间隙的日语：ほうでんギャツプ