控制参量的英文

• control parameter

• "控制"英文翻译    control; dominate; regulate; ...
• "参量"英文翻译    parameter; characteristic
• "控制参数，控制参量" 英文翻译 :    control parameter
• "控制参量汇编程序" 英文翻译 :    control parameter assembly program
• "控制参数" 英文翻译 :    control parameter; controlled variable; controls parameter
• "操作控制参数" 英文翻译 :    process control parameter
• "电荷控制参数" 英文翻译 :    charge control parameter
• "过载控制参数" 英文翻译 :    overload control parameter
• "质量控制参数" 英文翻译 :    quality control parameter
• "控制参数设定板" 英文翻译 :    control setting panel
• "类型控制参数块" 英文翻译 :    type control parameter block
• "流量控制参数选择" 英文翻译 :    flow control parameter selection
• "统计过程控制参考手册" 英文翻译 :    statistical process control reference manual spc
• "自定义参量控制" 英文翻译 :    cpc custom parameter control
• "参量" 英文翻译 :    parameter; characteristic
• "路基路面质量控制参数现场检测" 英文翻译 :    field inspection of quauty control parameter 0f pavement and subgrade
• "参量自适应控制系统" 英文翻译 :    parameter adaptive control system
• "调制参数" 英文翻译 :    modulation parameter
• "调制参考水平" 英文翻译 :    level, modulation reference; modulation reference level
• "强制参谋咨询" 英文翻译 :    compulsory staff consultation
• "参量，参数" 英文翻译 :    parameter
• "参量的" 英文翻译 :    parametric
• "参量宏" 英文翻译 :    argument macros
• "参量化" 英文翻译 :    parametrization
• "参量阵" 英文翻译 :    parametric array

• Based on the two methods above , the observed data of yunfeng dam was anglicized . the computational results show that under - fitting problems were solved perfectly
  因此，利用观测资料进行厂房结构系统的反演分析，探讨合理的计算模型和控制参量，是十分有价值的研究课题。
• The software has the engine and the ac dynamometer data collection , the computation and the output of ac dynamometer control parameter , edition and curve processing of the measured data , and test report production and printing
  软件具有发动机和测功机数据采集,测功机控制参量计算和输出,被测数据的编辑和曲线处理,以及测试报告的生成和打印等功能。
• This text put great emphasis on to research and study below important problem proceed detailed : first , researched the analysised the parameters of small weather inside car , and make sure control parameters , so as to develop the controlling system
  本文着重对以下问题进行了详细的研究与探讨: 1 、对车内小气候控制参量进行了研究分析,确定了合理的参数类型和数量,使系统开发可行而且实用。
• The method has been applied to some examples and the circuit experiment and the results show that it is important to control chaotic systems . second , we propose an enhancing project based on the practical application
  利用这种解析方法，我们可以从理论上得到控制低维混沌系统的控制参量之间的关系，将该方法应用到一些实例及电子线路实验上，得到了对实际控制混沌有指导意义的理论和实验结果。
• The control system was modified two separate installations for performing tests on the test - bed . the control parameter of each device is complete same , as to temperature , pressure , rev and test time . the control mode of temperature , pressure and rev was closed loop
  它被改造为在主机上有两个独立的试验装置，它们的控制参量是完全相同的，分别为温度、压力、主轴电动机的转速和性能试验时间，其中温度、压力、转速采用闭环控制的方式。
• The basic principle of variable step - size algorithm is analysed , as the facter of variable step - size algorithm mse , the non - linear function of error signal , autocorrelation of error signal and the kurtosis of error signal is proposed , and four new variable step - size cma is achieved . 3 . the kurtosis of equalizer output as a new variable step - size facter is propose , which provide an alternative method of variable step - size , and a new variable step - size cma by putting it into cma is achieved
  3 、分析了将输出信号的峰度用于步长控制的可行性，为变步长算法步长的控制参量提供了新的选择，并将其应用于恒模算法的步长控制，得到一种新的恒模改进算法，并通过计算机仿真实验验证了改进算法优良的收敛性能。
• In industrial the temperature system is classed large nonlinear system . with associative memory neural network as identification and fuzzy neural network as control established model reference adaptive control system , succeeded realized single dealing control . model reference adaptive control system supplied new method for other lager nonlinear system such as flux , stress and fluid system
  温度控制系统是典型的非线性大滞后控制系统，根据本文提出的联想记忆神经网络辨识器，与模糊神经网络控制器相结合，建立模型参考自适应控制方案，成功的实现了对单腔电阻加热炉的控制，模型参考自适应控制方案可以向其它大滞后非线性特性的过程控制参量(如流量、压力、液位等)推广。
• Firstly , the parameters controlling ductile crack growth are gotten from the resistance curve result of standard 3 point bending specimen , then the resistance curves of the tension specimen for the welded joint with different strength mis - matching are predicted based on the cell model
  首先由标准三点弯曲试件的阻力曲线，得出反映材料微观损伤的特殊单元模型控制参量，再根据该参量对不同接头强度匹配下双边缺口拉伸试件的阻力曲线进行了定量预测，其结果与试验结果相当吻合。
• This paper emphatically researched the problem how to calculate the intersection point between workpiece that rotated with variational angle velocity and milling cutter that moved with complicated track and rotated with high speed . furthermore it adopted the discrete curve surface method for every milling cutter , and treated image frame as the control parameter of position of milling cutter during the intersection calculation process , so the algorithm of intersection between workpiece and milling cutter was obtained . the paper also discussed further three - dimension graphic problem of manufacture process
  文中对做变角速度运动的工件和运动轨迹复杂的高速自转中的铣刀求交问题进行了重点研究，采用将铣刀上的每个刀尖划出的曲面离散化的方法，以图像显示的帧数作为求交计算过程的铣刀位置的控制参量，得出了铣刀与工件的求交算法。
• In application , the problems on how to uniquely determine the kinematics inverse solution and how to constitute and simplify the optimization model using iga are mainly considered for redundant manipulator trajectory planning , in the meanwhile , the problem of realtime optimizing the control paramatres using iga in cstr tracking control is also investigated
  在实际工程应用中，针对冗余机械手轨迹规划，主要研究如何唯一确定运动学逆解以及如何建立和简化iga的优化模型；针对cstr系统，主要研究跟踪控制中利用iga实时优化控制参量的问题。