接合过程的英文

• mass-transfer process

• "接合"英文翻译    joint; zygosis; juncture; ar ...
• "过程"英文翻译    process; procedure; transver ...
• "接合过程（离合器）" 英文翻译 :    engaging(clutch)
• "闭合过程" 英文翻译 :    closed process
• "并合过程" 英文翻译 :    coalescence process
• "复合过程" 英文翻译 :    cladding process; recombining process
• "复合过程线" 英文翻译 :    compound hydrograph
• "混合过程" 英文翻译 :    mixed process; mixing process
• "结合过程" 英文翻译 :    cohesive process
• "聚合过程" 英文翻译 :    polymerization process
• "联合过程" 英文翻译 :    combination process
• "啮合过程" 英文翻译 :    engagement process
• "融合过程" 英文翻译 :    fusion process
• "熔合过程" 英文翻译 :    alloying process
• "整合过程" 英文翻译 :    integrative process
• "综合过程" 英文翻译 :    combined process
• "走（磨）合过程" 英文翻译 :    running -in process; running-in process
• "走合过程" 英文翻译 :    running -in process; running-in process
• "肌腱愈合过程" 英文翻译 :    healing process of tendon
• "热酸聚合过程" 英文翻译 :    hot acid polymerization process
• "选择聚合过程" 英文翻译 :    selective polymerization process
• "直接水合过程" 英文翻译 :    direct hydration process
• "自体愈合过程" 英文翻译 :    self-healing （proce ）; self-healing（proce ）
• "二氧化碳结合过程" 英文翻译 :    binding process carbon dioxide
• "聚合过程中的传质" 英文翻译 :    principles of mass transfer in polymerization engineering

• Simulation of clutch engagement during vehicle starting
  汽车离合器起步接合过程的仿真研究
• Simulation research of clutch engagement during vehicle start
  汽车离合器起步接合过程的仿真研究
• By use of the explicit expression involving the main facts , the accurate control and further analysis penetrating into the dynamic essence were developed
  影响接合过程的参数在最佳接合规律中表达为显式形式，便于精确控制和深入分析各种因素对接合过程影响的动力学机理。
• The jerk of clutch is studied , and a rule that clutch can be optimizing controlled at every gear is given according to the test result . the rule means much to control clutch
  对不同挡位离合器接合的冲击度进行了研究，并根据试验结果提出了不同挡位离合器接合过程的优化控制准则，该准则对实现离合器的优化控制具有指导意义。
• According to the detailed analysis of main clutch engaging process control target and adaptive demands and based on speed signal , a control strategy of main clutch for automated mechanical transmission ( amt ) was put forward
  摘要在详细分析主离合器接合过程控制目标及自适应要求的基础上，提出了一种基于转速信号的amt车辆主离合器控制策略。
• The driver model should imitate the behavior of a real driver as well as possible . for this purpose , the staring behavior was defined by taking into account the coalesce process about the drive side and take - off side of the friction clutch , the driving behavior was defined by taking into account the change of acceleration pedal position , arrester pedal position and clutch pedal position in the shifting process
  定义车辆起动特性时考虑了起步阶段离合器主从动部分的接合过程,定义行驶特性时考虑了行驶阶段加速踏板和制动踏板的开度变化以及换档过程中离合器踏板和加速踏板的开度变化情况,真实地描述了一个驾驶员的特性,使得模拟结果更接近于实际。
• The dynamic equation for analyzing torsional vibration of the vehicle drivetrain is established based on analyzing the jointing process of frictional clutches , and the inherent frequency , the response of torsional vibration and the sensitivity of rigidity parameters to inherent frequency are studied
  摘要文章在分析车辆最常用的膜片弹簧摩擦离合器接合过程的基础上，建立汽车传动系的扭转振动的力学分析方程；结合实际车型，分析了车辆的固有频率、扭振响应、刚度参数对固有频率的灵敏度。
• Streptomyces low copy number plasmid scp2 * is also employed for the cloning and recovery of large dna fragment from streptomyces . as scp2 * can accommodate large dna insertions and is efficiently transmissible among its permissive hosts such as s . lividansbut seemed to be unable to replicates in streptomyces sp . fr - 008 , it might be a suitable vector for the cloning of the entire fr - 008 pks gene cluster through gene replacement followed by conjugation with 5
  Scp2 *可以在变铅青链霉菌等许可宿主内复制并在许可宿主间有效转移，但似乎不能够在链霉菌fr - 008中复制，因此可能适合于在链霉菌fr - 008中通过进行基因置换及随后的链霉菌fr - 008和变铅青链霉菌间的接合过程来克隆完整的fr - 008生物合成基因簇。