振动机构的英文

• vibrating mechanism
• vibrator unit

• "振动"英文翻译    vibrate; vibration; vibrance ...
• "机构"英文翻译    mechanism
• "高频振动机构, 微颤机构" 英文翻译 :    dither mechanism
• "振动机" 英文翻译 :    bob bing machine; bobbing machine; jar ring machine; jarring machine; mechanical shaker; pulsator; rocker; shaking machine; vibrating machine; vibration machine
• "振动器振动机" 英文翻译 :    vibration machine
• "发动机振动" 英文翻译 :    engine ibration; engine lugging; engine vibration
• "风动振动机" 英文翻译 :    air driven vibrator
• "风力振动机" 英文翻译 :    pneumatic vibrator
• "苹果振动机" 英文翻译 :    apple shaker
• "平板振动机" 英文翻译 :    plate type vibrate
• "水锤泵；振动机" 英文翻译 :    pulsator
• "压电振动机" 英文翻译 :    piezoelectric vibration machine
• "玉米振动机" 英文翻译 :    corn shaker
• "振动机械" 英文翻译 :    vibrating machine
• "振动歧动机" 英文翻译 :    vibrating motor; vibrator motor
• "耙动机构" 英文翻译 :    raking mechanism
• "摆动机构" 英文翻译 :    swing mechanism; tilting mechanism
• "扳动机构" 英文翻译 :    trip gear
• "被动机构" 英文翻译 :    driven member
• "策动机构" 英文翻译 :    operating mechanism
• "差动机构" 英文翻译 :    differential attachment; differential mechanism; mixing box; modified roll mechanism
• "传动机构" 英文翻译 :    actuating device; actuating system; actuation gear; actuator; connecting gear; connecting rod gear; drive mechanism; driving mechanism; gear train; linkage; media; medium; movement; powered mechanism; transmission mechanism; transport mechanism
• "从动机构" 英文翻译 :    follower
• "带传动机构" 英文翻译 :    tape handler
• "带驱动机构" 英文翻译 :    tape drive mechanism

• The method for improving performance of vibration plate is put forward after data analysis
  在对所得数据进行分析比较后，对振动机构提出了改进意见。
• Abstract : the nonlinear finite element dynamic simulation model for an oscillation mechanism with 4 - eccentric axis for continuous casting machine is established by means of the theory of kineto - elastodynamics
  文摘:根据运动弹性动力学的理论方法，建立了连铸机四偏心式振动机构非线性有限元动力学仿真模型。
• 5 . the modal experiment analysis on vibration mechanism will be completed by inv306 intellectualized signal collection and process analysis system for validating the finite element analysis model
  利用inv306型智能信号采集和处理分析系统对振动机构进行模态验证试验分析，以确定仿真模型和分析数据的正确性。
• According to the principle of mechanical vibration , through qualitative and quantitative analysis the paper research the vibration transportation mechanisms of the rice seeding thrower , and establish mathematic models and parameter relation of the mechanism ' s locomotion
  根据机械振动学原理，对水稻抛秧机的振动输送机构进行了机构学分析并建立机构运动数学模型和参数关系，对设计的振动机构有定性和定量的分析。
• 3 . according to the principle of the finite element method , the research establishes finite element models of the vibration transportation mechanisms , some model parameters such as the frequency and vibration type are confirmed and validated by the modal analysis , then which analyzes dynamic - state response of the model and confirms the swing distributing of the models , thereby make the design of models precise . 4
  根据有限元法的理论，建立振动机构的有限元力学模型，对该力学模型进行模态分析，通过模态分析确定抛秧机振动形态和所需的频率等参数；然后此基础上再进行力学模型的稳态响应分析，研究该模态下机构的振幅分布，以确定模型设计的准确性。
• Oscillator mechanism with four - eccentric axes is widely used in modem continuous casting machine . with the increase of operation speeds of the machine , elastic vibrations of the machine parts became much obviously . in order to design the machine reasonably , the complex dynamic property of the system must be studied deeply
  结晶器四偏心式振动机构是大型连铸机上广泛采用的一种振动装置，随着拉速的提高，其弹性振动效应非常明显，对其复杂弹性动力学性能进行深入研究是合理设计该系统的基础。
• Abstract : guiding accuracy of casting mould depends on structure and oscillation parameters , such as elastic deformation of guiding leaf - springs , play of bearings between linkages , stroke and frequency of mould oscillation , etc . . in this paper , these factors are studied by means of kinetic and dynamic analysis of oscillating mechanism
  文摘:通过对连铸机结晶器振动机构的运动学和动力学分析，研究了导向板弹簧的弹性变形、连杆轴承间隙等结构参数及振幅、振动频率等运动参数对结晶器仿弧误差的影响。