拉伸试样的英文

• tensile sample
• tensile specimen
• tensile test piece
• tensile test sample
• tensile test specimen
• tension specimen

• "拉伸"英文翻译    draw; stretching; traction; ...
• "试样"英文翻译    sample; specimen; test piece ...
• "拉伸试样的" 英文翻译 :    tensile
• "紧凑拉伸试样" 英文翻译 :    compact tension specimen; ct specimen
• "拉伸试验试样" 英文翻译 :    tensile test piece
• "切口拉伸试样" 英文翻译 :    notched tensile specimen
• "缺口拉伸试样" 英文翻译 :    notched tensile specimen
• "单侧缺口拉伸试样" 英文翻译 :    single edge notch tension specimen
• "金属拉伸试验试样" 英文翻译 :    metallic materials test pieces for tensile testing
• "缺口试样拉伸试验" 英文翻译 :    notched tensile test
• "另一种拉伸试样取样方位" 英文翻译 :    alternate tension test orientation
• "中心缺口板材拉伸试样" 英文翻译 :    centre notched sheet tension specimen
• "镁及其合金加工制品拉伸试验用试样" 英文翻译 :    test pieces for tensile test for wrought aluminum and magnesium and tleir alloy products
• "拉伸试棒" 英文翻译 :    tensile test bar
• "拉伸试片" 英文翻译 :    tensile specimen
• "拉伸试验" 英文翻译 :    cupping machine; drawing test; elongaation test; elongation test; extension test; pull test; pulling test; pulltest; stretching test; tensile testing; tension test
• "拉伸试验机" 英文翻译 :    cupping machine; pull test machine; pulltestmachine; tensile machine; tensile strength testing machine; tensile testing machine
• "拉伸试验图" 英文翻译 :    tensile test diagram
• "拉伸试验仪" 英文翻译 :    tensometer
• "形拉伸试验" 英文翻译 :    u-tension test
• "做拉伸试验" 英文翻译 :    make a tensile test
• "纤维缠绕增强塑料环形试样拉伸试验方法" 英文翻译 :    test method for tensile strength of ring of filament- winding reinforced plastics
• "缺口接伸试样" 英文翻译 :    notched tensile speciman
• "冲击拉伸试验" 英文翻译 :    repeated impact tension test
• "单轴拉伸试验" 英文翻译 :    uniaxial tensile test; uniaxial tension test

• Fatigue tests were carried out on the limited width specimen with center - hole
  摘要对有限宽中心带孔拉伸试样进行疲劳试验。
• Corrosion of metals and alloys - stress corrosion testing - part 4 : preparation and use of uniaxially loaded tension specimens
  单轴加载拉伸试样的制备和应用
• According to the special shape of the irradiation monitoring pipe , the semicircle - shaped tensile samples are designed
  摘要根据辐照监督管的特定形状，设计了半圆形标?拉伸试样。
• Corrosion of metals and alloys - stress corrosion testing - preparation and use of uniaxially loaded tension specimens
  金属和合金的腐蚀.应力腐蚀试验.第4部分:轴向载荷拉伸试样的制备和使用
• Microstructure analyses of tensile samples by sem show that crystalline grains are very fine and have the orientated solidification structures
  拉伸试样显微组织晶粒细小，具有定向凝固特征。
• Corrosion of metals and alloys . stress corrosion testing . part 4 : preparation and use of uniaxially loaded tension specimens
  金属和合金的腐蚀.应力腐蚀试验.第4部分:单轴载荷拉伸试样的制备和使用
• On the basis of macroscopic simulated results , polycrystal model including grain boundary zones was established to model the mesoscopic processes
  在宏观模拟结果基础上，通过建立包含晶界影响区的多晶模型，对宏观拉伸试样颈缩微区的细观变形过程进行了数值模拟分析。
• The results showed that the partial liquid phase was one of the main reasons for the premature fracture of the material during high temperature tension over 518
  结果表明：局部液相是导致该复合材料在518以上高温拉伸试样过早断裂的主要原因之一，为该材料超塑成形工艺参数的确定提供了参考依据。
• Above analysis can provide instructions for grain boundary design and controlling in grain boundary engineering . dynamics intergranular fracture process is modeled with considerations of grain boundaries damage
  通过考虑晶界损伤，进一步对拉伸试样破坏单元的动态沿晶断裂过程进行了数值模拟分析。
• The thickness is only 200um , and the width of the test part is 300u . m . it is first time nationally to use such a small specimen to measure mechanical properties of materials with uniaxial tension test
  本文采用的拉伸试样，厚度只有200 m ，试验段宽度为300 m ，对如此微小的试样进行单轴拉伸试验以得到其应力应变曲线在国内还是首次。

• 拉伸试样的日语：ひっぱりしけんへん