扭剪的英文

• torsion

• "扭"英文翻译    turn round
• "剪"英文翻译    scissors; shears; clippers a ...
• "拉、扭剪" 英文翻译 :    tension-torsion
• "扭剪力" 英文翻译 :    torsional shear
• "扭剪仪" 英文翻译 :    torsion shear apparatus
• "环式扭剪仪" 英文翻译 :    torsion ring shear apparatus
• "扭剪试验" 英文翻译 :    torsion shear test; torsional shear test
• "扭剪试验装置" 英文翻译 :    torsion shear apparatus
• "自钻式扭剪仪" 英文翻译 :    self-boring type torsion shear apparatus
• "扭剪式高强度螺栓" 英文翻译 :    torshear type high strength bolt
• "扭剪型高强度螺栓" 英文翻译 :    tor-shear type high-strength bolt; torsional rigidity of section
• "扭剪型高强度螺栓连接副" 英文翻译 :    twist share type high strength bolt connection pairs
• "室内土工试验扭剪仪" 英文翻译 :    torsion shear apparatus
• "钢结构用扭剪型高强度螺栓连接副" 英文翻译 :    sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
• "扭计骰" 英文翻译 :    rubik's cube
• "扭计祖宗陈梦吉" 英文翻译 :    ss)(two con men; two con men
• "扭计祖宗" 英文翻译 :    the mischief makers
• "扭计杂牌军" 英文翻译 :    nui ji za pai jun
• "扭计新娘" 英文翻译 :    the wise bride

• Tor - shear type high - strength bolt
  扭剪型高强度螺栓54
• Torsion shear apparatus
  室内土工试验扭剪仪
• Testing of adhesives for metals and of bonded metal joints ; torsional shear test
  金属粘合剂和金属粘结接头的检验.扭剪试验
• Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
  钢结构用扭剪型高强度螺栓连接副
• Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
  钢结构用扭剪型高强度螺栓连接副技术条件
• Torsional shear - high - strength bolts should all shake their heads to finally shake off the tail end of plum , not omission
  扭剪型高强螺栓应全部拧掉尾部梅花头为终拧结束,不准遗漏
• We are specialized in producing sets of large - hex high - strength bolts , sets of torshear type high - strength bolts , sets of dacrolon bolts and cheese head studs for arc stud welding
  我公司技术力量雄厚，生产设备精良，检测设备完善，是生产钢结构用高强度大六角螺栓连接副、扭剪型螺栓连接副、达克罗螺栓连接副和电弧螺柱焊用圆柱头焊钉的专业公司。
• In this paper , some aspects such as the behavior of pore pressure of unsaturated loess , the dynamic constitutive relationship and the characteristics of the dynamic modulus , dynamic strength and dynamic damping ratio are studied with the dynamic torsional shear test of loess
  在以上研究的基础上，本文又通过黄土的动扭剪试验研究了非饱和黄土的孔隙压力特性、动本构关系、动剪切模量特性、动强度特性以及动阻尼比特性。
• And a post - liquefaction test method has been put forward , in which the cyclic loading and the static loading courses are both controlled by stress mode . this method reflects the in - situ conditions well and truly , and a lot of tests have been done using this method . in these tests the effects of confining pressure , relative density , liquefaction severity etc . have been thoroughly investigated
  主要工作内容如下：参与研制了振动扭剪全自动多功能三轴仪，并利用其独特试验功能设计了一套饱水砂土液化后特性的试验方法，试验过程中模拟地震作用的动加载过程及模拟大变形发生的静加载过程均采用应力控制的方式进行，试验方法跟现场条件更为接近并用该试验方法对相对密实度、固结压力、液化度等对液化后变形特性的影响进行了研究。
• In the past , there were a large number of research studies on the behaviour of concrete - filled steel tubes ( cfst ) subjected to compression , bending or combined compression and bending , and there were a few research studies on the behaviour of cfst subjected to pure torsion , compression - torsion , bending - torsion , compression - bending - torsion and compression - bending - shearing . however , the behaviour of cfst members under complicated loading conditions still needs to be studied deeply
  以往,研究者对钢管混凝土构件在轴压、纯弯和压弯荷载作用下的性能进行了大量研究,对纯扭、压扭、弯扭、压弯扭及压弯剪受力状态下的工作性能也有一些研究报道,但研究工作,尤其对压弯扭剪构件的工作机理的研究仍有必要深入进行。