强度条件的英文

• strength condition

• "强度"英文翻译    intensity; strength; magnitu ...
• "条件"英文翻译    condition; term; factor
• "刚度条件" 英文翻译 :    rigidity condition; stiffness condition
• "古纬度条件" 英文翻译 :    palaeolatitudinal consideration
• "湿度条件" 英文翻译 :    humidity condition
• "温度条件" 英文翻译 :    condition of temperature; temperature conditions
• "稳定度条件" 英文翻译 :    stability condition
• "程度条件格式" 英文翻译 :    extent-condition format
• "过度条件下检验" 英文翻译 :    exaggerated test
• "弱照度条件下的" 英文翻译 :    low light level; low-light level
• "条件屈服强度" 英文翻译 :    offset yield strength
• "进度条" 英文翻译 :    progress bar; progressbar; tgauge
• "自然条件下的强度" 英文翻译 :    insitu strength
• "厚度条纹" 英文翻译 :    thickness fringe
• "进度条颜色 红" 英文翻译 :    red
• "进度条颜色 蓝" 英文翻译 :    blue
• "进度条颜色 绿" 英文翻译 :    greed
• "印度条子平布" 英文翻译 :    cherolee
• "印度条子细布" 英文翻译 :    indian madras
• "强度" 英文翻译 :    intensity; strength; magnitude; stringency; strike; avidity 辐射强度 radiation intensity; 抗震强度 shock strength; 劳动强度 the intensity of labour; 工作强度 working strength; 抗拉强度 tensile strength
• "复杂应力条件下岩石的强度" 英文翻译 :    rock strength under complex stress
• "简单应力条件下岩石的强度" 英文翻译 :    rock strength under simple stress
• "矿用高强度圆环链用钢技术条件" 英文翻译 :    high tensile steels for round link chains for mines - technical requirements
• "条件" 英文翻译 :    1.(客观的因素) condition; term; factor 工作条件 working conditions; 生活条件 living conditions; 贸易条件 terms of trade; 自然条件 natural conditions; 利用有利条件 make use of the favourable factors; 根据自己的条件做某事 do sth. on one's own terms; 在这[那]种条件下 on this [that] condition; 在目前条件下 under present circumstances; 有条件要上, 没有条件, 创造条件也要上。 when the conditions exist, go ahead; when they don't exist, then create them and go ahead.2.(提出的要求) requirement; prerequisite; qualification 共产党员的条件 the requirements of the party members; 提出条件 put forward the requirement; list the prerequisites; 有条件地同意 agree with qualifications; 符合入学条件 satisfy the entrance requirement; 如果三项先决条件得不到满足, 他们就拒绝谈判。 they refused to negotiate unless three preliminary requirements were met. 耐心是教学必备的条件。 patience is a requirement in teaching.; 条件刺激 conditioned stimulus; 条件反射 conditioned response; conditioned reflex; 条件反应 [动物学] conditioned response (cr); 条件句 [语言学] conditional clause
• "色饱和度条带效 应" 英文翻译 :    banding saturation

• For the pipe ' s weakness parts tee , advance the reinforce ways if the strength conditions can not content
  对于管道薄弱部件的三通，提出了不能满足强度条件时的加固方法。
• Bring forward the strength conditions of the different pipe pars . confirm the stress checking computations ways of the line pipes and corner pipes
  对于不同的管道部件提出了相应的强度条件，确定了直管段及转角管段的应力验算方法。
• Although most part of the parameters for the design of bivis extruder currently need to be determined by adopting the analogy method , but flow capacity and condition of strength are the constraint conditions that it has to satisfy
  虽然目前双螺杆磨浆机设计的大部分参数需要采用类比法确定，但流量和强度条件是其应当满足的约束条件。
• In addition , on the basis of fem , parametric analyzing program of belt rollers and housings is developed by open architecture tools for the belt conveyor ’ s design . the program follows the whole process of analysis and inducts users to complete it easily
  在分析的基础上分别对滚筒和机架的结构进行优化,在保证结构满足其刚度强度条件下,尽量使结构轻便,并对优化前后进行分析。
• Abstract : considering the cutting tool ' s dynamic intensity . this paper made optimization about the cutting value of higher chromium which cast iron , and put forward a theoretic foundation which can be used to cut higher chromium white cast iron with ceramic cutting tools economically
  文摘:考虑刀具动态强度条件下，对用陶瓷刀具加工高铬铸铁的切削用量进行了优化计算，从而为用陶瓷刀具经济性地加工高铬铸铁提供了理论依据。
• In other words , the process of analyzing relaxation zone related to one safety factor can also be regarded as the process of searching potential slide surface related to the same safety factor . elastic wedge model is used for analysis of relaxation zone of cutting homogeneous slope . on the basis of elastic plane - strain theory , the relaxation zone can be calculated according to mohr - coulomb or drucker - prager law and single tension intensity principle which are both related to one safety factor after three - dimensional stress field of the cutting slope is got
  提出均质边坡开挖松弛区可以用弹性理论中的楔形体理论分析，在平面应变问题的基础上得到开挖坡体的三向应力场之后，可运用考虑安全储备后的强度条件(主要为摩尔?库仑或德鲁克?布拉格强度准则和单轴抗拉强度准则)解析坡体分步开挖过程中的松弛区范围，给出了具体的计算步骤，并通过算例较详细地说明了操作过程。
• The highest safety strength of private key per bit in the public - key cryptography systems is the elliptic curve cryptography at present . under similar secure conditions , the ecc has the advantages such as : less computation amounts , shorter length of private key , smaller storing and bandwidth . moreover , it has been declared as standard documents adopted by many international standard institutions and regarded as the most universally used public key system
  椭圆曲线密码体制是目前公钥体制中每比特密钥安全强度最高的一种密码体制，在相同安全强度条件下，椭圆曲线密码体制具有较短的密钥长度，较少的计算量、存储量、带宽等优点，而且椭圆曲线密码体制已经被许多国际标准化机构作为标准化文件向全球颁布，被认为是下一代最通用的公钥密码系统。
• In consideration of the soil arch effect between anti - slide piles , a calculation formula for the anti - slide pile spacing was developed , taking the following factors as the controlling conditions - the static equilibrium equation of the frictional resistance and adhesive force between the side of piles and slope soil , which sustains the thrusting force of the landside , and the strength conditions at the medial cross - section and two end sections of soil arch
  摘要考虑抗滑桩桩间土拱效应，以桩侧与边坡土体间的摩阻力及黏着力承担滑坡推力的静力平衡条件和土拱跨中与拱脚处截面的强度条件共同控制，建立了抗桩间距的计算公式。
• A new method was developed for design of the composite material flywheel with high speed . in this paper , the method of optimization of shape design for the composite material flywheel with high speed was put forward on the base of the analytical method and research optimization of shape design , and established the models of density optimization of energy and light mass . these models were used to design two typical composite flywheels with high speed in hybrid electrical vehicle flywheel battery and the stress level and convergence on the flywheel were got . then a new way was developed for optimization of shape design of the composite material flywheel with high speed
  在此基础上对高速复合材料飞轮进行了形状优化设计，将复合材料有限元分析方法和优化设计技术相结合，提出了复合材料的形状优化的方法，分别建立了以高速复合材料飞轮的以储能密度最大为目标函数的形状优化模型和以质量最轻为设计目标的形状优化模型，并以混合动力客车飞轮电池中高速复合材料飞轮作为具体应用，使其在满足强度条件和几何约束条件下，分别寻求其最大储能密度和最轻质量，从而为高速复合材料飞轮的形状优化设计提供参考依据。