强化机理的英文

• strengthening mechanism

• "强化"英文翻译    strengthen; intensify; conso ...
• "机理"英文翻译    mechanisation; mechanization ...
• "磁化机理" 英文翻译 :    magnetization mechanism
• "催化机理" 英文翻译 :    catalytic mechanism
• "脆化机理" 英文翻译 :    embrittling mechanism
• "钝化机理" 英文翻译 :    mechanism of passivity
• "固化机理" 英文翻译 :    curing mechanism
• "活化机理" 英文翻译 :    mechanism of activation
• "焦化机理" 英文翻译 :    mechanism of coking
• "空化机理" 英文翻译 :    cavitation mechanism
• "老化机理" 英文翻译 :    aging mechanism; mechanism of aging
• "气化机理" 英文翻译 :    gasification mechanism
• "酸化机理" 英文翻译 :    acid mechanism
• "同化机理" 英文翻译 :    mechanism of assimilation
• "退化机理" 英文翻译 :    degradation mechanism
• "雾化机理" 英文翻译 :    atomization mechanism
• "硬化机理" 英文翻译 :    hardening mechanism
• "支化机理" 英文翻译 :    branching mechanism
• "强化机制" 英文翻译 :    strengthening mechanism
• "富营养化机理" 英文翻译 :    eutrophication mechanism
• "键合退化机理" 英文翻译 :    bond degradation mechanisms
• "血液净化机理" 英文翻译 :    blood clearing mechanism
• "矿滤池净化机理" 英文翻译 :    purification mechanism of sand filter
• "活动依存性强化机制" 英文翻译 :    activity-dependent reinforcement mechanism
• "转台抛丸清理强化机" 英文翻译 :    rotary table shot blasting machine

• Status of study on strengthening mechanism of rhenium in single crystal superalloys
  铼在单晶高温合金中强化机理的研究现状
• Among the researches of bombarded polymers , the cross - linked structure efficiently account for these improvements of physical characters
  利用交联网状结构模型分析聚合物强化机理，比较好地解释了上述性能改善的原因。
• The alloy strengthening mechanisms of solid - solution strengthening , distortion strengthening , fine - grain strengthening and deposition strengthening have been reviewed
  摘要简要介绍了固溶强化、形变强化、细晶强化和沉淀强化的强化机理。
• Therefore , it will have important academic significance and engineering application value to do experimental research of r134a with the aid of the heat transfer enhancement technique which combines micro - fin with secondary flow and to analyze the boiling heat transfer enhancement theory in a helical tube with micro - fined inner side
  因此采用微肋与螺旋管二次流相结合的强化传热技术，用新型环保制冷剂r134a来进行实验研究，分析螺旋管内表面为三维微肋结构时对流动沸腾传热的强化机理，具有重要的学术意义和工程应用价值。
• In the first , designed and set up the visual experiment equipments , and carried on the visual experiment , the characteristic of low re flow was analyzed through injecting ink to the channel ; secondly , in order to analyzing channel fluid conduct heat mechanism of strengthening further , heat transfer and fluid flow experiment study device was designed and set up , and carried on the experiments under the equal heat flux border situation
  首先设计并建立了可视化实验装置，进行可视化实验。通过向通道注墨水以显示流体流动状况，分析了低re数时的流体流动特点；其次，为进一步深入分析通道内流体传热强化机理，设计并建立了换热及流体流动实验研究装置，进行了等热流边界条件换热和流体流动阻力实验。
• Strengthening mechanism of ion nitriding is different from surface quenching and cementation , which makes surface strengthen by quenching to get martensite . ionic nitriding is the way to make materials strengthe n , which result from the steady compound formed on the surface of the metal . there is no need for quenching after treatment
  离子渗氮的强化机理不同于表面淬火，渗碳等表面热处理方法，这些方法必须进行淬火得到马氏体使表面强化，而离子渗氮是在金属表面形成稳定化合物而使材料强化，处理后不须淬火。