弯梁的英文

发音:

"弯梁"怎么读用"弯梁"造句

英文翻译手机版

curved beam

"弯"英文翻译 curved; bent; crooked; flexu ...
"梁"英文翻译 beam
"顶弯梁" 英文翻译 : top bow; top iron
"抗弯梁" 英文翻译 : bending beam
"弯梁车" 英文翻译 : sonic 125
"弯梁机" 英文翻译 : beam bender; beam bending machine; beam bending press; beaming machine
"预弯梁" 英文翻译 : preflex beam
"顶弯梁架" 英文翻译 : top bow rest; top-bow rest
"顶弯梁柱" 英文翻译 : top bow separator; top-bow separator; top-bowseparator
"顶弯梁座" 英文翻译 : top bow socket; top-bow socket
"弯梁的净空" 英文翻译 : cam bearing clearance
"弯梁流变仪" 英文翻译 : bbr
"压弯梁机" 英文翻译 : beam bender
"预弯梁桥" 英文翻译 : preflex beam bridge
"通过台端部顶弯梁" 英文翻译 : vestibule end carline
"弯力" 英文翻译 : bending force
"弯肋骨" 英文翻译 : bent frame
"弯肋材" 英文翻译 : crooked timber
"弯雷公藤精" 英文翻译 : loxopterygine
"弯了的钉子" 英文翻译 : bent nail
"弯勒铁颚" 英文翻译 : bainite chin

例句与用法

The simplified method of load lateral distribution of curved beam bridge with non - radial bearings
非径向支承弯梁桥荷载横向分布的简化计算
Suggestion to post - tensioned bounded pre - stressing construction in small - radius camber arch bridges
小半径弯梁桥中后张有粘结预应力施工问题刍议
Elastic analysis method of preflex composite beam proposed by japanese was broken through
该方法突破了日本学者提出的以弹性分析法为基础的预弯梁计算理论。
Applicationof steel pipe pile and bridge framework construction kickstandin the construction of cast - in - place box beam
对连续弯梁桥空间转角近似计算方法的探讨
Bitumen and bituminous binders - determination of the flexural creep stiffness - bending beam rheometer ; german version en 14771 : 2005
沥青和沥青粘合剂.挠曲蠕变刚性的测定.抗弯梁粘质流
By the vibration tests , the dynamic property before and after the damage obtained in statics tests is tested and analyzed
通过hrb400级钢筋的模态试验,分析了此类钢筋受弯梁的模态特性,比较了无损伤梁于正常使用状态下的梁的模态特性。
In the paper , the study of analysis method of internal force for curved - beam bridge structure analyzed by spacial method of curved - bar grillage finite element method is introduced
本文对弯梁桥采用曲杆梁格有限元法进行空间结构分析时的内力计算方法进行了研究。
According to test of 4 beams reinforced with hrb400 steel bars , the question are analyzed on the flexural strength of members with different ratio , and on the crack and deflection under the state of serviceability
通过hrb400钢筋作受力主筋的4根受弯梁的试验研究，着重分析了在不同配筋率下构件的受弯承载力及正常使用下裂缝与挠度问题。
The result appears that the strength , hardness and ductility of corroded rc beam decrease with corrosion ratio , and the structure failure mode may change from flexural failure to shear failure when stirrup ratio is low
研究表明，锈蚀受弯梁的强度、刚度和延性随着锈蚀率的增加而减少。对配箍率较小的锈蚀梁，其破坏形态可能从受弯破坏转变为受剪破坏。
Moreover , it adopts modularization structure and clear flow . some numerical results form this pa per compared with these from sap93 to not only reflect correctly characteristic of curved girder but also be proved its reliability
用cbsa对弯梁桥算例进行分析并与sap93程序计算结果相比较，结果正确反映了弯梁桥的受力特性，并验证了cbsa计算程序及空间曲梁单元法的可靠性。