座舱盖的英文

• [航空] canopy
  ◇座舱盖抛放 [航空] hood jettison

• "座舱"英文翻译    cabin; cockpit
• "盖"英文翻译    a surname
• "扁平座舱盖" 英文翻译 :    flush canopy
• "玻璃座舱盖" 英文翻译 :    glazed canopy
• "打开座舱盖" 英文翻译 :    canopy raising
• "后座舱盖" 英文翻译 :    rear canopy
• "滑动座舱盖" 英文翻译 :    sliding cockpit cover; sliding cockpit enclosure
• "铰链座舱盖" 英文翻译 :    hinged cockpit hood; hingedcockpithood
• "可抛座舱盖" 英文翻译 :    ejectable canopy
• "前座舱盖" 英文翻译 :    forward canopy
• "锁住座舱盖" 英文翻译 :    lock the canopy
• "透明座舱盖" 英文翻译 :    transparent canopy; transparent cockpit cover
• "增压座舱盖" 英文翻译 :    pressurized canopy
• "整体座舱盖" 英文翻译 :    one-piece canopy; single-piece canopy
• "座舱盖保险" 英文翻译 :    canopy deactivation
• "座舱盖材料" 英文翻译 :    canopy material
• "座舱盖电门" 英文翻译 :    canopy switch
• "座舱盖骨架" 英文翻译 :    canopy frame
• "座舱盖滑轨" 英文翻译 :    camopy guide rail
• "座舱盖结霜" 英文翻译 :    canopy frosting
• "座舱盖蒙布" 英文翻译 :    canopy cover
• "座舱盖蒙雾" 英文翻译 :    canopy fogging
• "座舱盖抛放" 英文翻译 :    canopy jettison; hood jettison
• "座舱盖抛投" 英文翻译 :    canopy jettisoning; hood jettisoning
• "座舱盖破裂" 英文翻译 :    canopy fluff

• Requirements of the heating and loading fatigue test of the canopy for the aircraft
  飞机座舱盖加温加载疲劳试验要求
• Canopy manual operating handle
  座舱盖手控柄
• Canopy actuating cylinder
  座舱盖开启作动筒
• The design quality of movable cabin grealty affects the use of aircraft and the safety of pilot
  摘要活动座舱盖设计的好坏严重影响飞机的使用和飞行人员安全。
• The canopy transparency was strengthened to withstand a four - pound , 350 - knot bird strike
  透明座舱盖被加强到可以经受一只四磅重的飞鸟以350节相对速度产生的撞击。
• It is indicated two keystones of cabin design and give some advice on a king of cabin at last
  最后本文指出了座舱盖设计中需注意的两个问题并对某型号座舱盖设计提出了改进意见。
• An losipescu - type of fixture , which had been previously used for the static shear strength tests of unidirectional laminates or metal materials , was proved useful for the shear static and fatigue tests of multidirectional laminates
  ( 6 )进行mdyb - 3座舱盖有机玻璃撞击损伤剩余强度和疲劳裂纹扩展试验，发现撞击损伤引致的疲劳裂纹的扩展规律与理想的表面裂纹明显不同。
• The main purpose of this dissertation is to determine some of the fracture parameters of mdyb - 3 pmma and characterize its fatigue crack propagation behavior experimentally , and thereby , to offer basis to the residual life evaluation and the maintenance guideline of mdyb - 3 pmma canopy structures
  通过本文的断裂参数和疲劳裂纹特性的试验研究，并建立相应的分析模型，从而为评价有机玻璃的剩余寿命，确立座舱盖航空有机玻璃使用和维护准则提供基础。
• 7 the investigation of the thermoeconomic performance of an existing facility used for thermal fatigue experiments of aircraft canopy reveals the possibility and practicability of taking measures to improve it significantly . a piping system with alternative variation of flow temperature exists in this facility
  对一现行的飞机座舱盖热疲劳试验系统? ?即流体温度升降交替变化的管路系统，进行了热经济行为的研究，揭示出它具有潜在与可行的重大改进方向和途径。
• The present article arms at summariging the problemes of relativety large stress and deformation caused by the temperature variation , difficulties of manufacturing and maintaining , and the new demands of cabin design from the new method for life saving , etc , and then analysing the advantages and disadvantages for various joints from four fields of the strees , manufature , maintainous and mew design demand
  本文针对飞机活动座舱盖使用中因温度变化引起较大应力和变形、生产和维修困难、新的救生方式对舱盖设计提出新的要求等问题，从应力、生产、维护和新设计要求四个方面分析比较了各连接形式的优劣。

• 座舱盖的泰文
• 座舱盖的法语：verrière
• 座舱盖的俄语：фонарь
• 座舱盖的印尼文：kanopi;