已知点的英文

• given point
• known point

• "已知"英文翻译    known number
• "点"英文翻译    drop
• "已知" 英文翻译 :    [数学] known number◇已知数 known number; datum
• "测知点" 英文翻译 :    take-off spot
• "知点入游戏" 英文翻译 :    segam x8
• "比已知" 英文翻译 :    than anybodys known
• "已知的" 英文翻译 :    foregone; given; known
• "已知段" 英文翻译 :    known segment
• "已知角" 英文翻译 :    known angle
• "已知井" 英文翻译 :    fixed well
• "已知量" 英文翻译 :    known quantity
• "已知数" 英文翻译 :    data; known number; prescribed value
• "已知值" 英文翻译 :    give value; given value; known value
• "【数学】已知数。" 英文翻译 :    known number
• "非已知数" 英文翻译 :    undetermined value
• "时人已知处" 英文翻译 :    can drifting clouds and white storks
• "业已知悉" 英文翻译 :    have already learned of the matter
• "已知储量" 英文翻译 :    know reserves; known reserves
• "已知错误" 英文翻译 :    conscious error
• "已知的道路" 英文翻译 :    path, known way
• "已知的对手" 英文翻译 :    known antagonist
• "已知的元素" 英文翻译 :    the element known
• "已知地址" 英文翻译 :    known address
• "已知电压" 英文翻译 :    setpoint voltage
• "已知段表" 英文翻译 :    known segment table

• In this distance , the unknown bore is forecasted by choosing known bores
  通过在此相关距离内选择已知点，对未知点进行预测，得到预测结果。
• Z coordinate and direction angle of the instrument can be calculated and reset by measuring z coordinate of known points ( max . 10 points ) displayed
  通过观测已知点的高程（最多10个点）来计算并重新设置测站点的高程与方位角。
• Resection is used to determine the coordinates of an instrument station by performing multiple measurements of points whose coordinate values are known
  后方交会是利用在未知点上对若干已知点进行观测，获得的观测值来计算出未知点的坐标。
• Create a new coordinate by measuring to two points . the 1st point becomes the origin and the 2nd point becomes the n axis direction
  通过观测两已知点即可确定一新点的坐标。坐标系为：第一个点作为坐标原点，而第一点到第二点的方向作为n （轴）方向。
• With the color and luminance difference of wheat field and outside the field , the position of field edge and the candidate points of it could be detected ; the slope of the field - edge was calculated by using passing a known point hough transform
  根据麦田和田外区域的不同颜色及亮度特征，判断出田埂的位置以及田埂线的方向候补点群，使用过已知点的哈夫变换计算出田埂线的斜率。
• Combined frame modeling method and surface modeling method build up the topological relations of spacial point , line and surface on condition that the points on the surface of measured object is considered as known points after compared with other several modeling method
  在比较了已有的几种三维建模方法后，结合线框建模和表面建模的方法，将近景摄影测量所测物体表面点作为已知点，构建空间点、线、面的拓扑关系。
• At the basis of analyzing different boundary tracking algorithms , boundary point estimate algorithm based on angle and boundary point searching algorithm based on circumferential neighborhood extending were advanced to avoid tracking trap and to improve the robust of the boundary tracking algorithm
  通过分析不同算法的特点，提出了基于已知点夹角的边界点预估计算法和基于圆弧邻域扩展的边界点搜索算法，以避免跟踪进入搜索陷阱，提高边界跟踪对边界变化的鲁棒性。