屈服应力值的英文

• yield value of stress

• "屈服"英文翻译    surrender; yield; bow to; gi ...
• "应力"英文翻译    stress; strain; tension; cha ...
• "值"英文翻译    price; value
• "屈服应力" 英文翻译 :    flow stress; proof stress; stress yield; yielding stress; ys yield stress
• "屈服应力比" 英文翻译 :    yield stress ratio; yield-stress ratio
• "上屈服应力" 英文翻译 :    upper yield stress
• "下屈服应力" 英文翻译 :    lower yield stress
• "保证屈服应力" 英文翻译 :    guaranteed yield stress
• "动态屈服应力" 英文翻译 :    dynamic yielding stress
• "高温屈服应力" 英文翻译 :    high temperature yield stress
• "宏观屈服应力" 英文翻译 :    macroscopic yield stress
• "假定屈服应力" 英文翻译 :    constrain yield stress
• "剪切屈服应力" 英文翻译 :    shear yield stress
• "静态屈服应力" 英文翻译 :    static yield stress
• "卡森屈服应力" 英文翻译 :    ca on yield stre; casson yield stress
• "拉伸屈服应力" 英文翻译 :    tensile yield stress
• "名义屈服应力" 英文翻译 :    nominal yield stress
• "屈服应力模型" 英文翻译 :    yield stress model
• "屈服应力粘结" 英文翻译 :    yield stress controlled bonding
• "生物屈服应力" 英文翻译 :    bioyield stress
• "塑料屈服应力" 英文翻译 :    plastic yield stress
• "条件屈服应力" 英文翻译 :    constrained yield stress; offset yield stress
• "压缩屈服应力" 英文翻译 :    compressive yield stress
• "正割屈服应力" 英文翻译 :    secant yield stress
• "残余变形屈服应力" 英文翻译 :    offset yield

• Testing of rubber ; determination of tensile strength at break , tensile stress at yield , elongation at break and stress values in a tensile test
  橡胶试验.在抗拉伸试验中断裂抗拉强度屈服应力值
• When the weight ration between mmt and starch was closed to 1 : 1 and 1 : 0 . 4 , the yield stress of mmt / cation starch er fluid was even lower than that of pure mmt and cation starch er fluids
  而蒙脱土与阳离子淀粉的复合颗粒电流变液在电场下的屈服应力值均比相同条件下阳离子淀粉电流变液的值还低。
• When the weight ration between mmt and starch was closed to 1 : 1 and 1 : 0 . 4 , the yield stress of er fluid was lower than that of pure mmt er fluid though this value was higher than that of pure cms er fluid
  但蒙脱土与梭甲基淀粉的质量比为1 : 1和1 : 0 . 4时，复合颗粒电流变液在电场下的屈服应力值只介于蒙脱土电流变液和梭甲基淀粉电流变液的屈服应力值之间。
• When the weight ration of mmt and starch was closed to 1 : 0 . 1 , the yield stress of er fluid could reach its maxium . the yield stress of the typical er fluid was over 6 . 5 kpa at 4 kv / mm electric field , which was 2 . 2 times that of pure mmt er fluid and five times that of cms er fluid , respectively
  在4kv / m们以的电场作用下，该电流变液的屈服应力值达6 . 5kpa ，分别是相同条件下的纯蒙脱土电流变液和梭甲基淀粉电流变液的屈服应力值2 . 2倍和5 . 0倍。
• Interestingly , it was found that the er properties of this ternary composite depended on the content of formide . when the weight ration between mmt and formide was closed to 1 : 0 . 08 , the yield stress of er fluid could reach its maxium and the typical yield stress was over 8 . 3 kpa at only 2 kv / mm electric field , which was 3 . 2 times than that of mmt / cms er fluid . when the electric field was 3 kv / mm , the yield stress was over 12 . 0 kpa , which was 2 . 4 times than that of mmt / cms er fluid
  当蒙脱土/甲酞胺/梭甲基淀粉的质量比为1 : 0一0 . 08 : 0 . 2时，复合颗粒电流变液的力学值随甲酞胺含量的增加而升高;当甲酞胺与蒙脱土的质量比为0 . 08时，在2kv / ~的电场作用下，其电流变液的屈服应力值达8 . 3kpa ，是相同条件下的蒙脱土/梭甲基淀粉电流变液力学值的3 . 2倍，而当电场强度为3kv / mm时，其电流变液的屈服应力值达12 . 0kpa ，是相同条件下蒙脱土/梭甲基淀粉电流变液力学值的2 . 4倍。