导电通路的英文

• electrically conductive path

• "导电"英文翻译    electric conduction
• "通路"英文翻译    thoroughfare; highway; highr ...
• "斜导电通道" 英文翻译 :    diagonally conducting duct
• "数字无线电通路" 英文翻译 :    digital radio path
• "电通路交叉连接系统" 英文翻译 :    epxc electrical path cross connect system
• "电通" 英文翻译 :    electric flux◇电通量 electric flux; displacement flux; flux; 电通密度 electric [dielectric] flux density
• "导电" 英文翻译 :    electric conduction
• "通路" 英文翻译 :    thoroughfare; highway; highroad; route; viae; lead; outlet; approach; passage; gangway; access; close circuit; closed circuit; completed circuit; closed canal; channel; circuit
• "电通量" 英文翻译 :    dielectric flux; flux， electric
• "电通线" 英文翻译 :    line of electric flux
• "导电性，导电度" 英文翻译 :    electric conductivity
• "导电性，导电率" 英文翻译 :    electroconductivity
• "导电率；导电度；导电系数" 英文翻译 :    electric conductivity (= electrical conductivity)
• "电通电通量电焊剂" 英文翻译 :    electric flux
• "半导电" 英文翻译 :    semiconducting; semiconduction; semiconductive
• "不导电" 英文翻译 :    non-conducting 不导电材料 electrically non-conductive material
• "超导电" 英文翻译 :    superconducting; superconductivity
• "导电靶" 英文翻译 :    conductive target
• "导电板" 英文翻译 :    current carrying plate; current conducting plate; current-carrying plate; current-conducting plate
• "导电棒" 英文翻译 :    contact rod; contact spike; contact stub; current conducting rod; current-conducting rod
• "导电泵" 英文翻译 :    conduction pump
• "导电表" 英文翻译 :    conductivity meter
• "导电箔" 英文翻译 :    conductive foil
• "导电布" 英文翻译 :    conductive fabric
• "导电层" 英文翻译 :    conducting layer; conducting stratum

• Percolation theory can explain the formation of conductive passages under the dependence of the conductivity and graphite content in ecac
  导电沥青混凝土中导电率与石墨掺量依赖性可用渗流理论解释其导电通路的形成。
• Piezoresistivity of ecac may involve proximity effect , microcrack and the staggered arrangements of conductive pass - ways due to shear strength of aggregates
  压敏产生的原因是导电沥青混凝土试件的压缩邻近效应、微裂纹和石料间的剪切力使部分导电通路错位。
• The polymer antistatic additive forms a network throughout the polymer matrix , as a result there are conductive pathways through the polymer , over which a built - up charge could be grounded
  高分子抗静电剂在基体树脂中形成网络结构，树脂中聚集的电荷通过形成的导电通路得以释放。
• The conductive performance of conductive powder filling asphalt concrete is improved by adding a few chopped carbon fibers . carbon fibers play a role of the conductive bridge effect and the short circuit effect because of high long / diameter ratio , improving the conductive mechanism of electron
  掺入少量短切碳纤维可明显改善导电粉末填充沥青混凝土的导电性能，发挥碳纤维大的长径比所具有的导电桥梁作用和导电通路短接作用，改善电子的导电机制。
• So the conductive behavior in ac field was equivalent with the parallel connection of a resistor and a capacitor , the nonlinearity of v - i characteristics originate from a combination of the implication of the nonlinear contribution of tunnel conduction between graphite particles and the production of additional conducting pathways under sufficiently strong local fields , which is the function of the gap between graphite particles and has a relation with the transition ability of electrons
  导电沥青混凝土的导电行为则可用隧道效应进行分析，交变电场中的导电行为可等效为电阻r和电容c并联，非线性v - i特性产生于隧道效应时粒子间的非线性导电和高电场时诱发额外的导电通路，二者是粒子间隙的函数，与电子跃迁能力有关。
• An epoxy anti - corrosive paint was prepared with polyaniline doped sulfosalicylic iii abstract acid as anti - corrosive agent . the phase texture of fracture surface on the coating was observed by sem . the results showed that granulated polyaniline formed crossing network in the coating , so the coating is well conductible
  采用磺基水杨酸掺杂聚苯胺与环氧树脂共混制备防腐涂料，扫描电镜研究结果摘要表明，聚苯胺是以连续的网状结构在复合物中形成导电通路，从而保证涂层具有良好的导电能力。
• In this investigation carbon black - filled electrical conductive composites of poly ( ethylene terephthalate ) / polyethylene were first prepared through the single - screw melt - blended extrusion , then drawing , followed by the quenching and subsequent press molding . the relationships among the influencing factors including composition , hot stretching ratio and compatibilizer , morphology and properties of composites were systematically investigated . positive temperature coefficients effect and crystallization behaviors of composites were preliminarily analyzed
  本文拟采用单螺杆熔融共混挤出?热拉伸?淬冷的新的成型方法制备炭黑填充的pet pe复合导电材料，热拉伸的目的是使材料的分散相( pet相)在加工过程中原位形成纤维，而炭黑基本分散在纤维中或纤维的表面上，使炭黑粒子间间距减小，形成更多的导电通路，从而提高材料的导电性能，同时保持或提高材料的力学性能。

• 导电通路的日语：どうでんろ