孔隙率测定的英文

• porosity measurement

• "孔隙"英文翻译    small opening; hole; pore; a ...
• "率"英文翻译    rate; ratio; proportion
• "测定"英文翻译    determine; determination; se ...
• "孔隙率测定法" 英文翻译 :    porosimetry
• "孔隙率测定仪" 英文翻译 :    porosimeter
• "孔隙率" 英文翻译 :    absolute porosity; air porosity; air voids; factor of porosity; fractional void; percent of void; percentage of voids; poriness; porosity factor; void content; void factor; voidage; voids ratio
• "孔隙比；孔隙率" 英文翻译 :    void ratio
• "孔隙度, 孔隙率" 英文翻译 :    amount of porosity
• "孔隙度；孔隙率" 英文翻译 :    porosity
• "孔隙率．孔隙度" 英文翻译 :    porosity
• "印制板镀层孔隙率测试方法" 英文翻译 :    test method for plating porosity of printed boards-the gas exposure method
• "【物理学】孔隙率。" 英文翻译 :    void volume
• "百分孔隙率" 英文翻译 :    percent porosity
• "闭型孔隙率" 英文翻译 :    porosity of closed voids
• "部分孔隙率" 英文翻译 :    fractional porosity
• "次生孔隙率" 英文翻译 :    secondary porosity; secondaryporosity
• "大孔隙率" 英文翻译 :    macroporosity; open grain
• "多孔性；孔隙率" 英文翻译 :    poriness
• "集料孔隙率" 英文翻译 :    aggregate porosity
• "焦炭孔隙率" 英文翻译 :    coke porosity
• "绝对孔隙率" 英文翻译 :    absolute pordosity; absolute porosity
• "开型孔隙率" 英文翻译 :    porosity of opened voids
• "颗粒孔隙率" 英文翻译 :    particle porosity
• "可控孔隙率" 英文翻译 :    controlled porosity
• "孔隙率（度）" 英文翻译 :    porosity

• Determination of apparent relative density and porosity of industrial briquette
  工业型煤视相对密度及孔隙率测定方法
• Rock - tests for physical properties of rock - part 3 : determination of porosity
  岩石.岩石物理特性试验.第3部分:孔隙率测定
• Advanced technical ceramics - methods of test for ceramic coatings - determination of porosity
  高级工业陶瓷.陶瓷涂层的试验方法.孔隙率测定
• Measurement of interfacial porosity and finite element ana lysis of stress distribution in al2o3 - fiber - reinforced aluminium alloy composites
  合金复合材料界面孔隙率测定及复合材料应力分布有限元计算
• Methods of sampling and test for carbonaceous materials used in aluminium manufacture - cold ramming pastes - determination of the apparent porosity of baked rammed paste
  制铝工业用碳素材料的取样和试验方法.第4部分:冷捣糊块.第10节:热捣糊块表观孔隙率测定
• As a kind of scaffold material for tissue engineering cornea , collagen is too soft to support cells in stromal layer , and its biodegrading is too fast . in this study , porous collagen sponge were crosslinked using dehydrothermal ( dht ) treatment and / or l - ethyl - 3 - ( 3 - dimethyl aminopropyl ) carbodiimide ( edc )
  通过扫描电镜观察、孔隙率测定、力学性能测试以及吸液性测试，对材料进行了表征，结果表明胶原材料在交联后均能保持其三维多孔结构，并具备了良好的机械性能，亲水性也得到降低。