孔缝的英文

• suture

• "孔"英文翻译    hole; opening; aperture
• "缝"英文翻译    seam
• "气孔缝" 英文翻译 :    stomatic cleft
• "穿孔缝合术" 英文翻译 :    suture of perforation
• "穿孔缝术" 英文翻译 :    suture of perforation
• "针孔缝隙" 英文翻译 :    pinhole leak
• "穿线孔缝合针" 英文翻译 :    regular eye needle
• "弹机孔缝合针" 英文翻译 :    spring eye needle
• "食管穿孔缝术" 英文翻译 :    closure of perforation of esophagus
• "伴生原孔缝合线" 英文翻译 :    accessory archeopyle suture
• "自动锁圆头钮孔缝纫机" 英文翻译 :    automatic eye sewing machine
• "领钩和平钮孔缝纫机,套圈锁钮孔机" 英文翻译 :    hook and eye tacker machine
• "孔凤影" 英文翻译 :    fengying kong
• "孔分布" 英文翻译 :    pore size distribution
• "孔佛斯" 英文翻译 :    fanny cornforth
• "孔费托" 英文翻译 :    confetto
• "孔夫兰" 英文翻译 :    confland
• "孔费索雷" 英文翻译 :    confessore
• "孔夫朗昂雅尼西" 英文翻译 :    conflans en jarnisy; conflans-en-jarnisy
• "孔费索尔" 英文翻译 :    confersor; confesor
• "孔夫朗代" 英文翻译 :    conflandey
• "孔费松" 英文翻译 :    confesson

• A 3d thin slot model for shielding analysis
  基于环路法的三维细孔缝电磁分析算法
• Laparoscopic appendectomy via three mini ports
  腹腔镜微小三孔缝扎法阑尾切除术
• Numerical study on coupling of electrostatic discharge electromagnetic fields into a metallic cavity through an aperture
  静电放电电磁场与金属腔体孔缝耦合的数值研究
• This thesis studies the slot coupling process and the effects of the cavity and the inner blocks on the coupling process
  本论文主要研究孔缝耦合及耦合后金属腔体及腔体内各种物质块对微波耦合过程的影响。
• Bartacking for various kinds of clothing such suits , jeans and workclothes , also applicabe for eye - let button hole tacking
  适用于西服、牛仔裤等各类服装受力部位固结制圆头纽孔缝尾加固、及缝锁顶圆的平缝机。
• The following conclusions are obtained . 1 . while the incident microwave is gauss - modulated , the resonant effect does exist in the cavity with slot
  得到以下结论: ( 1 )在高斯调制脉冲入射情况下,当带缝腔体内放置物质块时,孔缝场存在共振增强效应。
• 2 . while the frequency of the incident microwave is getting closer to the frequency at which the resonant effect appears , the electric field in the middle of the slot is group delayed
  ( 2 )当入射波载频接近共振频率时,孔缝中心耦合的电场强度存在群时延现象,群时延现象与共振增强效应同步发生。
• 3 . for a given size cavity with a given size slot , the microwave power coupled into the cavity will reach the maximum value while the length of metal block is at a certain value under the condition of resonance
  ( 3 )固定腔体和孔缝尺寸,在共振条件满足的情况下,当方形金属块边长为一固定值时,耦合到腔体内的微波功率出现一个极值点。
• If the condition of resonant is well satisfied , the electric field generated by a single microwave pulse is enhanced rapidly to the maximum value in the middle of the slot , then the value of the electric field attenuates slowly
  当共振条件满足时,单脉冲入射情况下孔缝中心电场很快增加到最大值,而后呈慢衰减趋势,多脉冲波入射下,电场经几次叠加才到达最大值。
• With the increase of the width of the slot , the e - field in the middle of the slot will decrease gradually , while the power in it increase gradually , the e - field and peak power in the cavity will also increase gradually
  随着孔缝宽度的增加,共振增强频率点有所偏移,孔缝中心耦合的电场强度逐渐减小,而孔缝中心耦合的功率峰值逐渐增大,腔体内耦合的电场强度和功率峰值也逐渐增大。