夹渣的英文

• cinder inclusion
• dirt hole
• dirt inclusion
• dross inclusion
• enclosed slag
• entrapped slag
• included slag
• scum
• slag enclosure
• slag entrapment
• slag inclusions
• slag occlusion
• slag patch
• slag spot

• "夹"英文翻译    double-layered; lined
• "渣"英文翻译    dregs; residue; sediment
• "浮渣，夹渣" 英文翻译 :    scum
• "夹渣 包渣" 英文翻译 :    cinderinclusion
• "夹渣(铸疵)" 英文翻译 :    slag inclusion
• "夹渣孔" 英文翻译 :    dirt hole
• "夹渣线" 英文翻译 :    slag line
• "长条夹渣" 英文翻译 :    slag stringer
• "焊道内夹渣" 英文翻译 :    interpass slag inclusion
• "夹渣；污垢；气泡" 英文翻译 :    dirt
• "夹渣脆性" 英文翻译 :    slag shortness
• "夹渣的清除" 英文翻译 :    slag removal
• "夹渣内孔" 英文翻译 :    abscess
• "夹渣生铁" 英文翻译 :    cinder pig iron
• "夹渣针孔" 英文翻译 :    slag pin hole
• "内生夹渣" 英文翻译 :    endogenous slag inclusion
• "砂模夹渣" 英文翻译 :    slagging of coating; slagging of sand
• "线状夹渣" 英文翻译 :    line inclusion; slag stringer
• "渣瘤夹渣" 英文翻译 :    slag nodule
• "焊缝中的夹渣" 英文翻译 :    slag inclusion welds
• "夹渣, 炉渣夹杂物" 英文翻译 :    interposition slag
• "拉长状夹渣物" 英文翻译 :    drawn-out slag streaks
• "凝析石墨夹渣" 英文翻译 :    kish graphite inclusions
• "凝析石墨夹渣(铸疵)" 英文翻译 :    kish graphite inclusions
• "清除非金属夹渣物" 英文翻译 :    elimination of non-metallic inclusions

• Slag, blowholes, and paint on unfused regions were observed at the welded junctions .
  在焊接处看到了夹渣，气孔及未熔透区的油漆。
• Hence lack of fusion and slag would exist at the weld root and create a large initial crack condition .
  因而未熔透及夹渣存在于焊缝棍部，并造成大的初始裂纹条件。
• Any severe deficiency of welding seams surface like cracks , pores , slags is forbidden
  焊缝表面不得有裂纹,气孔,夹渣等严重缺陷
• Internal defects : lack of penetration , lack of fusion , slag , gas pole , carck , overheating
  内部缺陷：未焊透、未熔合、夹渣、气孔、裂纹、过热。
• Conclusion the reason is that waste water was discharged before the precipitation
  结论废水未经沉淀，夹渣排放；某稀土厂废水是污染负荷的主要因子。
• The microstructure of coat do not take place obvious change as increased induction current and decreased melt time
  重熔层组织致密，未发现未熔合及夹渣等冶金缺陷。
• Centrifugal casting ， compact structure ， free from pinhole porosity and slag ， smooth surface and even wall thickness
  高速离心铸造,组织致密,无砂眼、夹渣，表面光滑、壁厚均匀。
• Steel cutting surface or shear surface should have no cracks , slag , stratification and the lack of greater than 1 mm prism
  钢材切割面或剪切面应无裂纹、夹渣、分层和大于1 ?的缺棱。
• Optics and optical instruments . preparation of drawings for optical elements and systems . part 3 : material imperfections . bubbles and inclusions
  光学和光学仪器.光学元件和系统用图纸制备.第2部分:材料缺陷.气泡和夹渣
• Each pass shall be cleaned free of slag before the next pass is deposited . each weld layer shall be visually free of slag inclusions , cracks , porosity and lack of fusion
  每一层焊道都应在熔敷下一层焊道前清除熔渣。每一焊层都不得有可见的夹渣、裂纹、气孔及未熔透现象。

• 夹渣的法语：inclusion de scorie
• 夹渣的日语：かす あわ あか スラグ巻込み スラグまきこみ
• 夹渣的俄语：pinyin:jiāzhā мет. шлаковина