复合应力的英文

• combined stresses
• complex stress
• complexstress
• composite stress
• compositestress
• compound stress
• compoundstress

• "复合"英文翻译    compound; complex; composite ...
• "应力"英文翻译    stress; strain; tension; cha ...
• "复合应力函数" 英文翻译 :    combined stress function
• "复合应力试验" 英文翻译 :    combined stress test
• "复合应力疲劳试验" 英文翻译 :    complex-stress fatigue test
• "合应力" 英文翻译 :    resultant stress
• "复合应力疲劳试验机" 英文翻译 :    combined stress fatigue tester
• "闭合应力" 英文翻译 :    closure stress
• "胶合应力" 英文翻译 :    cementing stress
• "联合应力" 英文翻译 :    combined stress
• "偶合应力" 英文翻译 :    coupled stress
• "双闭合应力" 英文翻译 :    dual closure stress
• "粘合应力" 英文翻译 :    adhesive stress; bond stress; bonding stress; bound stress
• "综合应力" 英文翻译 :    combination stress; combined stress; complex stress; compound stress
• "组合应力" 英文翻译 :    combined stress
• "黏合应力" 英文翻译 :    bond stress
• "耦合应力" 英文翻译 :    coupled stress; coupling stress
• "复合应变波" 英文翻译 :    complex strain wave
• "偶合应力流体" 英文翻译 :    couple stress fluid
• "容许结合应力" 英文翻译 :    allowable bond stress
• "复合应变张量" 英文翻译 :    strain compound tensor
• "合成应力,组合应力" 英文翻译 :    combined stress
• "容许单位结合应力" 英文翻译 :    allowable bond unit stress; allowable bond unitstress
• "组合应力的当量强度" 英文翻译 :    equivalent intensity of combined stress
• "复合形应力图" 英文翻译 :    complex type stress pattern; complex-type stress pattern

• Variation of bolt body strength under state of compound stress
  复合应力状态下的锚杆杆体强度变化
• Combined stress fatigue tester
  复合应力疲劳试验机
• On a general fracture criterion for brittle materials under combined tension torsion
  扭复合应力下脆性材料断裂的一般准则
• Study on propagation properties of combined stress waves in viscoplastic thin - walled tubes
  粘塑性薄壁管中复合应力波的传播特性研究
• Numerical simulation analysis of deep roadway ' s stability in compound stress field
  深部巷道围岩在复合应力场中的稳定性数值模拟分析
• Photoelastic determination of mixed - mode stress - intensity factors in a cylindrial bar subjected to bending and torsion simultaneously
  光弹性法测定圆轴弯扭组合变形复合应力强度因子
• Besides , on the basis of the test data under bending and torsion and the theoretical analysis on the tubular , the relative relationship between the bearing values is derived . second , based on the elastic theory , this paper deduces the rules of stress distribution and main physical and geometric parameters by analyzing the elastic stress distributions when the tubular is under such conditions as torsion , bending , shearing , combined bending and torsion , and combined shearing and torsion ; additionally , taking the strength criteria of concrete and steel as reference , the paper proposes a set of theoretic equations for the relative relationship between the bearing values
  本文利用弹性理论对扭转、弯曲、剪切、弯扭联合作用、剪扭联合系列作用下的构件弹性应力分布进行了研究，得出应力分布与主要物理和几何参数的规律；同时引入混凝土及钢的强度准则，得出了弯扭、剪扭复合应力作用下的承载力相关关系的理论方程，可供工程设计使用。
• Abstract : based on the test and analysis of 12 short restrained reinforced concrete columns with intermediate longitudinal bars , an analysis model is established to calculate the shear bearing capacities of the short columns subjected to axial load , bending moment and shear force , and with the intermediate longitudinal bars considered , the calculating formulae are derived
  文摘:根据12根配有中间筋的钢筋混凝土约束短柱试验与分析，建立了弯、剪、压复合应力状态下构件受力分析的力学模型，由此导出了考虑中间筋作用的构件抗剪承载力计算公式。
• The fastened end of bar was machined to multi cone - shaped heads . through the cone heads compress the inorganic anchoring material , the load was transmitted from bars to base material . it changes the transfer path of loads and takes advantage of high compress strength of inorganic material , thus enhanced the anchor intensity of inorganically post - installed bars
  本文提出一种新型的植筋技术? ?带锥头无机植筋,它把钢筋锚固端加工成多个锥头,通过锥头对无机锚固材料的挤压,将荷载传递给基材,使基材与无机锚固材料的界面上产生剪压复合应力状态,改变传统植筋的受力机理,利用了无机锚固材料抗压强度高的特点,从而提高了无机植筋的锚固强度。
• When the performance degradation is caused by the discrete cumulative damages , the degradation failure model based on renewal process is proposed and used to analyze the reliability of metallized film pulse capacitors in the laser device . when the degradation process is continuous , two models based on wiener - einstein and gamma processes are presented respectively . because it is difficult to obtain an analytical expression of the failure model using the latter method , we present a failure model based on monte - carlo simulation
  根据该模型的特点,给出了基于参数回归分析的统计推断方法,分别提出基于比例危险模型的竞争失效分析方法和基于位置-尺度模型的竞争失效分析方法; ( 4 )对于随机失效阈值问题,研究并给出了相对失效标准下的退化失效模型和分析方法;对强度退化的动态应力-强度干涉失效进行分析,提出了周期性应力作用下的动态应力-强度干涉失效可靠性模型和复合应力作用下动态应力-强度干涉失效可靠性模型。

• 复合应力的日语：ふくごうおうりょく くみあわせおうりょく コンパウンドストレス こんようおうりょく