喷孔的英文

• injection hole
• jet hole
• jet orifice
• nozzle hole
• nozzle orifice
• spit-out
• spray orifice

• "喷"英文翻译    time on the market; in seaso ...
• "孔"英文翻译    hole; opening; aperture
• "井喷孔" 英文翻译 :    blowhole
• "喷孔板" 英文翻译 :    orifice plate
• "喷孔盘" 英文翻译 :    orifice disk
• "主喷孔" 英文翻译 :    main orifice
• "冷却液喷孔" 英文翻译 :    coolant orifice; cooling orifice
• "流量喷孔板" 英文翻译 :    nozzle plate
• "排气喷孔" 英文翻译 :    jet orifice
• "喷咀的喷孔" 英文翻译 :    injector orifice; injector spray orifice
• "喷孔长径比" 英文翻译 :    ratio of nozzle hole length nozzle diameter
• "喷孔面积" 英文翻译 :    dynamic phase; nozzle hole area
• "喷孔气体" 英文翻译 :    fumarolic gas
• "燃料喷孔" 英文翻译 :    fuel orifice
• "氧枪喷孔" 英文翻译 :    nozzle of oxygen lance
• "圆柱形喷孔" 英文翻译 :    cylindrical orifice
• "锥形座喷孔" 英文翻译 :    nozzle with conic seat
• "薄膜冷却喷孔" 英文翻译 :    film-cooling orifice
• "海底热泉喷孔" 英文翻译 :    submarine hot spring vent
• "喷孔式喷油嘴" 英文翻译 :    aperture atomizer
• "同心喷孔喷咀" 英文翻译 :    concentric-orifices injector
• "钥匙孔形喷孔" 英文翻译 :    keyhole shaped orifice
• "薄膜冷却剂喷孔" 英文翻译 :    film coolant injection holes
• "薄膜冷却液喷孔" 英文翻译 :    film coolant injection hole
• "喷嘴的喷孔圆盘" 英文翻译 :    nozzle orifice disk

• The distance between orifice groups is another parameter associated with stability .
  喷孔组合之间的距离是与不稳定性有关的另一参数。
• As previously mentioned, spacing of the orifice groups with relationship to each other is important .
  如前所述，喷孔组合的相互间距是重要的。
• Improvement of the orifice discharge coefficient may not result in stability improvement as illustrated in one test series .
  由一系列的试验说明，喷孔流量系数的改善并没有导致稳定性的改进。
• The orifices of this nozzle are almost chocked up with carbide
  这个油嘴的喷孔几乎被碳化物堵死。
• Ratio of nozzle hole length nozzle diameter
  喷孔长径比
• Nozzle hole area
  喷孔面积
• Chapter 14 - natural gas fluids measurement , section 3 - concentric , square - edged orifice meters , part 2 - specification and installation requirements
  第14章:液化天然气的测量.第3节:同心式方缘喷孔流量计.第2部分:规范和安装要求
• The operation principle of a automatic flow - rate detecting system of fuel injector is introduced and the design of hardware and software is presented
  摘要介绍了喷油嘴四喷孔流量自动检测系统的工作原理，给出了系统硬件和软件设计。
• The system can fulfil the demands for scientific research of the flow - rate detecting with the features of reliable detected data . speedy measuring , better stability and repealabitity
  该自动检测系统具有检测数据可靠，测量速度快，稳定性高，重复性好的特点，能够满足四喷孔流量检测科学研究的需要。
• Simulation results show that better atomization can be realized by enhancing the cavitation intensity via increasing the injection pressure difference or decreasing the nozzle inlet round angle - radius ratio
  通过模拟计算可知，提高喷射压差和减小喷孔入口圆角半径都可以提高空穴强度，同时也发现提高喷孔长径比可以使空穴在喷孔出口截面上分布更为均匀。